Hello,
i read an old message of Ard van Breemen with subject "More things about
/proc /
failover of default gateway"
(http://mailman.ds9a.nl/pipermail/lartc/2002q1/002667.html)
and tryed to do the same config. But then i''m inserting the second
default route
ip tells:
root@epia# ip route add default via 192.168.1.1
RTNETLINK answers: File exists
As i know, there are no way to insert more than one route to some net (even
0/0), exept for kernel routes.
how it''s possible to execute command from the above
message?>ip link set dev eth0 up
>ip link set dev eth1 up
>ip addr add 192.168.1.10/24 dev eth0
>ip addr add 192.168.2.10/24 dev eth1
>ip route add default via 192.168.1.1
>ip route add default via 192.168.2.1
adv routing is on, equalcostmultipath too (but we don''t need it)
kernel 2.4.23 (gentoo source)
thanx for any help
PoltoS/
-------------------------------------------------
This mail sent through IMP: http://horde.org/imp/
-------------------------------------------------
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
