Hi, on page 3 of the lartc HOWTO one can read that it''s possible to do routing based on user id. Can someone explain me how to do this? And is it somehow possible to set the DSCP depending on the user id? Thanks, Jürgen Jacob _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> Hi, > on page 3 of the lartc HOWTO one can read that it''s possible to do > routing based on user id. > Can someone explain me how to do this? And is it somehow possible to set > the DSCP depending on the user id? > > Thanks, > Jürgen Jacobyou can use the owner module in iptables iptables -m owner -h for DSCP you can use -j DSCP here is a solution with fwmark: e.g iptables -t mangle -A OUTPUT -m owner --uid-owner 0 -j MARK --set-mark 1 and then ip rule add fwmark 0x01 table 1 after that you add all the route in table 1 ip route add ...... via ..... table 1 -- Anton Glinkov network administrator _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/