search for: glinkov

...th it (the burst) for example turning it off completely burst 0 cburst 0 for parent and children classes the rate falls ot 2-3 Mbits removing the esfq qdiscs doesn''t change anything... I want exact rate of 5Mbit for the parent class and no more? any suggestions are welcome :) -- Anton Glinkov network administrator

Hi I want to block the IP traffic between any 2 hosts on a switched ethernet LAN. Will setting all the possible IP addresses on a linux machine in the LAN do the trick or there is another easier solution? -- Anton Glinkov network administrator _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hello to everyone, Can someone help me with hints on how to configure a pppoe gateway on a linux box with 200+ clients behind it ? I''ve read that user-space daemons give A LOT of CPU overhead. I''m opened to ANY solution ! -- Radu Cugut mobile: +40 742 045686 web: http://rcugut.has.it

Hello list, Please don''t shoot me. I know I''m doing something with bonding that bonding wasn''t made for. I just want to give it a try. I want a simple mechanism to have a failover on a 24Mbit line to a 2Mbit line in case the 24Mbit line goes down. Between A and B there are two lines: a 24Mbit and a 2Mbit. I use two OpenVPN tunnels with tap devices: +-- tap0 (A)---

...=0 startup script: /sbin/modprobe bond0 /sbin/ip link set eth0 up multicast off /sbin/ip link set eth1 up multicast off /sbin/ip link set bond0 up multicast off /sbin/ip addr add 192.168.0.1/30 brd + dev bond0 /sbin/ifenslave bond0 eth0 eth1 Is this a bug, or I am doing something wrong? -- Anton Glinkov network administrator _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

helo again. I think this question i am asking is worth: we know that pppoe-server creates a pppX device on each connection done to it. So, when i have to shape, i have to shape each pppX connection device on itself alone. What i know is that the borrowing method on one device by itself, e.g. ppp0, alone using HTB or the like. this means that i have to create for another device, e.g. ppp1,

Hello, Will switchning to 64bit distribution (intel EM64T) provide any performance gain to the networking code: routing (lots of rules and big routing tables), scheduling (htb) and iptables? Thank you. -- Anton Glinkov network administrator

Hello Is the prio specification in the htb class global or is it on a per class basis? A simple example: class 1:10 parent 1: class 1:130 parent 1:10 prio 3 class 1:170 parent 1:10 prio 7 class 1:171 parent 1:170 prio 1 class 1:172 parent 1:170 prio 2 Which class will get excessive bandwidth first? 130 or 171/172? Thanks.

Hello Any idea what may cause this: # cat /proc/net/dev | wc -l 268 # ls -l /proc/sys/net/ipv4/conf/ | wc -l 120 all the interfaces have an ip address the kernel is 2.4.29. there are no error messages in the kernel log. -- Anton Glinkov network administrator _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Hi, on page 3 of the lartc HOWTO one can read that it''s possible to do routing based on user id. Can someone explain me how to do this? And is it somehow possible to set the DSCP depending on the user id? Thanks, Jürgen Jacob _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

here is the situation i am using htb.init with fwmark to do QoS. i have 2 parent classes with RATE=CEIL which then have some leafs each on his own. the first one works fine (it shapes the packets to the specified rate) class htb 1:21 root rate 1Mbit ceil 1Mbit burst 2909b cburst 2909b Sent 631520262 bytes 651550 pkts (dropped 0, overlimits 0) rate 131573bps 141pps lended: 380595 borrowed: 0

Hi All, This is out of the topic question, but I''m hoping that you can help me. If for example I''m going to install a Fedora 4 64-bit with 8 to 12 Gig of physical memory, how much swap file of directory do I need to create? Thank you very much, Wennie

Is it possible to negate the "match" to the ip? I want to match all traffic to dport 80 NOT going to dst 1.2.3.4: $TC filter add dev ${DEV_IFB} parent 1:0 prio 2 protocol ip u32 \ match ip protocol 0x6 0xff \ match ip dport 80 0xffff \ match ip dst 1.2.3.4/32 \ classid 1:14 I can''t find it in the docs. I tried "!" "\!" and "not" in several