Hi folks,
i spent my whole day trying to set up my linux router using load
balancing with multiple uplinks. I mainly focused on the nano howto, but
somewhere I have a big mistake within my head.
Basically the load-balancing is working, but not on a per-connection
basis - just on a per packet basis. Practically this is not usable of
course <g>
But as far as I understood it should work..
Assumptions:
(i) Using kernel v2.4.19 with julian patches..
(ii) The Remote Gateway has the same IP for both dial-up links
(iii) Using DSL Dial-Up Links (ppp0,ppp1)
(iv) Gateway IP: 217.5.98.12
(v) Internal Networks 192.168.0.0/24, 192.168.1.0/24
What I did:
(1) Masquerading
=========================================================================iptables
-t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -o ppp0 -j MASQ
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -d 0/0 -o ppp1 -j MASQ
iptables -t nat -A POSTROUTING -s 192.168.0.1/24 -d 0/0 -o ppp0 -j MASQ
iptables -t nat -A POSTROUTING -s 192.168.0.1/24 -d 0/0 -o ppp1 -j MASQ
(2) Firewalling+Connection Tracking
=========================================================================I use a
quite complex fw-script including connection tracking that works
for years within in a single-uplink enviroment.
[I also tried the simple setup from the nano-howto.. Also no per
connection load balancing!]
(3) Routing
=========================================================================Due to
the fact, I have the same gateway, I used the iif parameter for
policy routing -> is that the problem??
ip rule add prio 50 table main
[main table has just routes to 192.168.0.0/24 and 192.168.0.1/24,
no default route]
ip rule add prio 201 dev ppp0 table 201
ip route add default via 217.5.98.12 dev ppp0 proto static table 201
ip route append prohibit default table 201 metric 1 proto static
ip rule add prio 202 dev ppp1 table 202
ip route add default via 217.5.98.12 dev ppp1 proto static table 202
ip route append prohibit default table 202 metric 1 proto static
ip rule add prio 222 table 222
ip route add default table 222 proto static \
nexthop via 217.5.98.12 dev ppp0 weight 1\
nexthop 217.5.98.12 dev ppp1 weight 1
Come on guys, that´s not impossible, is it?
.\\ichael
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/