search for: ppp0

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! when I activate wondershaper on my dsl connection (pppoa vc mux), i get three errors: # sh -x /usr/sbin/wshaper ppp0 + /usr/sbin/xmlstarter setenv tc_downlink + DOWNLINK= + /usr/sbin/xmlstarter setenv tc_uplink + UPLINK= + [ -z ] + cat /proc/avalanche/avsar_modem_stats + grep Connection Rate + awk {printf("%d", $8)} + DOWNLINK=1504 + [ -z ] + cat /proc/avalanche/avsar_modem_stats + grep Connection Rat...

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | |...

hello to all i''m trying to set a filter but doesn''t want to work. i''ve set ut the qdiscs and the classes like this : tc qdisc add dev ppp0 root handle 1: htb default 20 tc class add dev ppp0 parent 1: classid 1:1 htb rate 120kbit tc class add dev ppp0 parent 1:1 classid 1:20 htb rate 30kbit ceil 120kbit tc class add dev ppp0 parent 1:1 classid 1:21 htb rate 30kbit ceil 120kbit tc class add dev ppp0 parent 1:1 classid 1:22 htb rate 30k...

Hello! My system is: Internet ADSL(PPPoE) ---> ppp0 [LINUX server(router)] eth0 ---> LAN Server(router) is running on LINUX Slackware 8.1. I have recompiled a 2.4.22 kernel, enabled all QoS support in the kernel config, including HTB. My ADSL bandwidth is 256Kbit/s for download and 64Kbit/s for upload. I use the following HTB+IPTABLES configurat...

Hi Is there a way of marking packets by mac address instead of ip or ports using a "tc filter u32 match"? I read somewhere that I could use the offset -8 and -14 to grab the mac addresses but if I use anything lower than -8, for example -9, I get an error. I''m modifying the wondershaper script to cap the download speed by mac address. Any sugestions?

...t of ip''s, but in running this setup I''ve never seen it use both gateway''s. Possible symptom I''ve noticed is that in the route cache, there tends to be 2 entries, with the used gateway showing up first, such as: 83.53.46.36 from 192.168.0.128 via 10.9.44.15 dev ppp0 src 192.168.0.1 cache <src-direct> mtu 1492 advmss 1452 metric10 64 iif eth0 83.53.46.36 from 192.168.0.128 via 66.189.76.1 dev eth1 src 192.168.0.1 cache <src-direct> mtu 1500 advmss 1460 metric10 64 iif eth0 In this case, ppp0 was listed as the second nexthop. If I rever...

...the remote vpn access(pptpd) throught shorewall. Which is the way to control vpn /ip/access in /etc/shorewall/accounting? Is my example correct? and if i have diferents vpn wil be with ppp1, ppp2 .. ? or i have to control throght shorewall zone vpn1,vpn2,... acc1-out:COUNT    account-ip    -    ppp0:192.168.1.100 acc1-in:COUNT    account-ip    ppp0:192.168.1.100    - DONE    acc1 # #acc2-in:COUNT    account-ip    eth0    195.8.169.2 #acc2-out:COUNT    account-ip    195.8.169.2    eth0 #DONE    acc2 -- Javier Martínez Technical Manager -----------------------------------------------...

I need basic PPPoE startup help. adsl-start DID bring up my PPPoE link (ppp0) to my ISP over eth0 via the DSL modem/bridge. My IPv4 CIDR block is routing and Shorewall is doing the firewalling. But shorewall has to be started after ppp0 is up and working. For now this means running shorewall restart (or start?). Shorewall 4.2 will have a way to restart shorewall wit...

Hello Mailing list, I have a problem with the prio qdisc and I don´t know what is wrong in my configuration This ist a sample configuration and looks like this: #include "fields.tc" #include "ports.tc" #define X16(i) i i i i i i i i i i i i i i i i dev ppp0 { dsmark { prio(bands 6, priomap X16($be)) { class if ip_proto == IPPROTO_UDP; class if tcp_dport == PORT_TELNET; class if tcp_dport == PORT_HTTP; class if tcp_dport == PORT_SMTP; class if ip_dst == 10.0.10.10; $be = class(6);...

Having study a number of documents on linux traffic shaper, I started to setup my shaping rules in my network. My linux box is running RH AS3 U3, shorewall 2.0.9. It is using PPPoE connected to the Internet firewall: eth0: connect to the adsl modem eth1: private net ppp0: virtual dial up interface for pppoe There is a ftp server on the private net It is listen for port 21 and configured 50000:51000 for PASV connection my related config file as follows /etc/shorewall/rules . DNAT all loc:192.168.103.100 tcp 21,20,50000:51000 . . /etc/shorewall/tcrules 1 ppp0 0.0....

...So this i s my last resource. This is NOT an ERROR, is just help to make something work. (sorry for my english) Hi have 3 zones loc eth0 => here we have 192.168.1.0/24 with 12 IP''s/PC''s I can subdivide in 2 tematics zones but if not needed there is no reason to do it. net ppp0 => adsl 512 Kb by contract and working net2 ppp1 => adsl 256 Kb by contract with another ISP and working but working at ¿512? (I will explain that later) I need to split the access to the internet between this 2 connections. I want to make 2 things Split by IP ==> 192.168.1.9-192.168.1.1...

...#39;m trying to setup traffic shaping on my linux gateway/router. The system has 3 interfaces: eth0 - My LAN - with IP address 192.168.0.254 eth1 - The ethernet connection to which my ADSL modem is connected. This has a 10.25.x.x IP, more on this later. The ADSL link has an upstream of ~1.2mbit. ppp0 - The PPP connection which is my WAN connection, with a real world IP. The system acts a router, performing NAT for my LAN. This works perfectly, as does traffic shaping on ppp0 - I get very good results. The trouble is that my ISP allows me to user another service over my ADSL line, as a bonus...

...release yesterday and tried the RC2 since a week. My config is a Debian running a kernel 2.4.27 home made with the CONNMARK.diff patch applied I''m using 2 ISP, one is Nerim with a fixed IP and the other is neuf telecom with a dynamic IP. I use NAT on both lines. The interfaces are: ETH0=PPP0 ISP nerim ETH1=PPP1 ISP neuf telecom ETH2=LAN ETH3=DMZ ETH4=Wifi. The features available in the kernel are: NAT: Available Packet Mangling: Available Multi-port Match: Available Extended Multi-port Match: Not available Connection Tracking Match: Available Packet Type Match: Avai...

Shorewall 4.5.15 3 Interface setup em1 p3p1 p4p4 ppp0 Hi, Since changing to NetworkManger on Fedora 18 I can no longer connect to the DSL Modem, which is connected to Interface em1. When the NetworkManger brings up the interfaces and ppp0, it no longer assigns an IP to em1. If I have ppp0 disabled and NetworkManger brings up the interfaces, em1 g...

Hello! I''ve got the following setup: ippp0 (isdn), ppp0 (adsl), eth1 (internal lan), eth0 (nic dedicated to the adsl modem) Firewall rules: Default 2.4. iptables (everything set to accept) except: iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE iptables -t nat -A POSTROUTING -o ippp0 -j MASQUERADE Routing Table: Default gw is set t...

Hi all! I''ve got 2 (soon 3) internet connection. 1 - via ADSL, 2(and3) via ppp My network: http://desima.objectis.net/network-diag linux1: user1.user2 eth0=192.168.1.1 ppp0=192.168.5.2( gw 192.168.5.1) gw=192.168.1.2 ( thru ADSL) compA=192.168.1.6 compB=192.168.1.15 gw2=192.168.1.217 via ppp to different ISP All works for compA and CompB, user1 should use default gw(192.168.1.2) user2 should use ppp0 For user2 it will work only if I change his route thru gw2(not...

Hello guys, I have two ISP's connected to my router. One via eth2, second one via ADSL modem, with ppoe doing on my Centos 5 . The problem I have is, that when ADSL fails , interface ppp0 is removed. This also removes my static routes configured for this interface. I do not want that, as I have load balancing configured and default route is removed when ppp0 interface disapears. This is my ifcfg-ppp0 config : USERCTL=yes BOOTPROTO=dialup NAME=DSLppp0 DEVICE=ppp0 TYPE=xDSL ONBOOT=y...

Hi... I have installed ip route 2 package on Linux kernel 2.4.25 I am using 2 tables: ################################### ebox:100.254~# ip route list table ALTER default via 192.168.100.253 dev br0 ebox:100.254~# ip route list table main 10.0.0.254 dev ppp0 proto kernel scope link src 10.0.0.1 192.168.100.0/24 dev br0 proto kernel scope link src 192.168.100.254 192.168.100.0/24 dev eth1 proto kernel scope link src 192.168.100.233 192.168.200.0/24 dev eth2 proto kernel scope link src 192.168.200.254 127.0.0.0/8 dev lo scope link default vi...

Hi all, I have a little problem with my home-made slackware linux server. Here is the scenario: 1. I have a local wifi network 2. my server do masquerading and exit in internet via a PPPoE connection Goals: 1. not use SQUID 2. shaping the traffic with classes 3. emule connection must have minimum priority and a band-limit of 10KBytes/s in uplink (server--->internet) Any idea? Thx, Diego --

I run a small Linux webserver and NAT router from my cable modem at home. Whenever someone starts an http download, all other traffic from my LAN is starved. Bandwidth is not really an issue, but latency is particularly horrible -- pings that usually come back in 20ms can take up to 600ms while the web server is active! I set up QoS (netfilter+iproute2) on the NAT machine in an attempt to give