LARTC - Mar 2003 - some problems with the tc command

Hello everyone!

I have some problems with the tc command. 
I write the same commands as in the manual but it gives me an error. I write:
"tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt
1000" for example but it doesn''t work. I have similar problems
with "tc qdisc add dev eth0 root handle 1: prio"
I don''t find the solution. I have the 2.4.18 kernel version. 
Does anyone know why it doesn''t work properly?

Regards to all and thank you in advance!

On Tuesday 11 March 2003 22:15, Jose Luis Pradas Adán
wrote:
> Hello everyone!
>
> I have some problems with the tc command.
> I write the same commands as in the manual but it gives me an error. I
> write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit
avpkt
> 1000" for example but it doesn''t work. I have similar
problems with "tc
> qdisc add dev eth0 root handle 1: prio" I don''t find the
solution. I have
> the 2.4.18 kernel version.
> Does anyone know why it doesn''t work properly?
You say "it doesn''t work".  Can you be more specific?  Can
you execute the
commands without error? 

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/