Displaying 20 results from an estimated 393 matches for "cbq".
Did you mean:
cbc
2006 Jul 19
2
PRIO and CBQ
Hi,
I''m work on traffic shaping and I would like to know if it''s possible to mix
differents Queueing Disciplines ??
I would like to combine the proporties of a PRIO discipline with that of a
CBQ discipline.
I read some documentation and I found nothing about that, can you help me ?
I think to try something like that :
tc qdisc add dev $DEV root handle 1: cbq …
tc class add dev $DEV parent 1: classid 1:1 cbq …
tc class add dev $DEV parent 1:1 classid 1:10 cbq …
tc class add dev $DEV paren...
2002 May 30
3
cbq parameters
If I create a cbq qdisc as a leaf of a cbq class, the bandwith rate is
the same of the root cbq qdisc or the rate of the cbq class?
Does exist the parameter rate on the "tc qdisc add" for cbq command?
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 10mbit avpkt 1000
cell 8
tc class add dev eth0...
2002 Sep 06
6
questiona about CBQ algorithm in Linux
Hi Stef and Alexey
I have read some documents about CBQ algorithm from http://www.icir.org/floyd/cbq.html
but still have some question about CBQ in Linux
.
1. First estimator can estimate how much bandwidth already USED per class. one estimating algorithm is EWMA (exponential weighted moving average), how about Linux implemenatation about estimator?
a...
2003 May 15
5
cbq vs htb?
Hello,
Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications?
from htb home> Both CBQ and HTB help you to control the use of the
outbound bandwidth on a given link. Both allow you to use one physical link to simulate seve...
2003 Jul 16
1
Problen in cbq , fw
Hi,
In my LAN Iam trying to make following setup:
- All the traffic generated by 10.0.2.1 should go to 10.0.2.11,
If
the destination of this traffic is internet than it should be
placed on its interface eth1. Outgoing traffic on eth1 should be
shaped.For this I am using fw filters and cbq.
_______
10.0.2.1 -------> 10.0.2.11(eth0 )----| A |-----
10.0.2.22(eth1)
-----------
On machine "A" , I run following commands:
## mark all the traffic coming from 10.0.2.1 by 1 ##
iptabl...
2003 Aug 20
9
CBQ_bandwidth
Hi Stef,
Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html
> I found a para as follows,
" CBQ is not always as accurate as it should be. See docum.org on the
test page for some tests with bounded classes. The algorithm used by cbq
is very "link sensitive". It calculates the link idle time and for that
it needs the real link bandwidth, average packet size and some other
paramet...
2005 Mar 20
3
cbq configuration is needed
Hi i need a cbq configuration that works and drops
packets if the flow exceeds an amount of data.. Do u
have any configuration that drops packets...? My cbq
configuraion doesnt drop packets... The traffic use
the correct class but seems that tha cbq is not able
to control correct the flow
____________________...
2002 Oct 09
0
parent and hierarchy problems with cbq.init
Hello Everyone :),
i''m using cbq.init version 7.1 for traffic shaper, the rule did work well with flat rule (without parent/child)..here the condition of my network :
- have a DMZ (and i not want the traffic to DMZ be bounded)
- i made the CBQ engine also a bridge and i put...
2005 Jun 02
0
CBQ throughput and efficiency question
Hello all, I am testing CBQ and HTB these days and I got a lots problem which needs your help. It is a little long text :) Thank you! (All my test is based on Redhat Linux9.0)
1.Is isolated of CBQ working? I have read Mr. stef word that he never made cbq isolated work.
2. I have setup an environment to test cbq: one tcp...
2005 Oct 11
3
Inaccurate results without natting the traffic.
Hi folks.
For quite a while, I tried to use linux (cbq and htb) to control
bandwidth in order to replace a cisco equipment used to play this role
on our network.
After trying here and there, with a bunch of different distros,
different versions, different compilations, ... the closest I could
get was as follows:
(using htb.init and cbq.init)
Desired...
2007 Apr 09
3
tc (CBQ) and UDP packets
2007 Dec 05
3
Adding qdiscs crashes kernel??
Hi all,
I''m having some problems setting up qdiscs on a bridge.The config looks
a little like this:
ifconfig ifb0 up # Bring up the IFB for this bridge.
tc qdisc add dev eth2 ingress
tc qdisc add dev eth3 ingress
tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000
cell 8
# Raw qdiscs on each bridge port
tc qdisc add dev eth2 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000
cell 8
tc qdisc add dev eth3 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000
cell 8
tc filter add dev eth2 parent 1: protocol 0x8100 prio 5 u32 match u16
300...
2004 Aug 06
0
CBQ + 802.1Q VLAN
...oth computers are downloading files at the same time, they need to never be more than 384Kbit together.
I want to attach the qdisc on eth1 (and no one on each VLAN ex. eth1.1, eth1.2, eth1.3 ...) so all VLAN traffic will be processed.
The config:
# root qdisc
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8
tc qdisc add dev eth1 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8
# root class
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 100Mbit rate 384Kbit weight 38Kbit prio 8 allot 1514 cell 8 maxburst 20 avpkt 1000 bounded
tc class add dev eth1...
2007 May 04
0
RSVP RESV not seen
...iver 2001
send cbr 64 5 60.0 rsvp 20.0 sync 0
HOST2-RECEIVER CONFIG:
#alias sender 192.85.3.2
#alias receiver 192.85.4.1
flow udp 192.85.3.2 2001 192.85.4.1 2000
recv rate sinkrate rsvp 100
RSVP.CONF:
- all nodes have the corresponding settings
api 4000
interface eth1 refresh 10000
tc cbq 1000000 2500
CBQ SCRIPT:
$TC qdisc add dev $DEVICE root handle 1: cbq \
bandwidth $RATE avpkt 1000 mpu 64
$TC class add dev $DEVICE parent 1:0 classid :1 est 1sec 8sec cbq \
bandwidth $RATE rate $RATE allot 1514 maxburst 50 avpkt 1000
$TC class add dev $DEVICE parent 1:1 classid :2 est 1sec 8se...
2001 Jul 12
4
kernel panic with ext3 and cbq
Hello,
I'm usign Kernel 2.2.19 with ext3 0.0.7b patches. I'm also
using cbq to control bandwidth. The cbq is correctly creating
the classes and queueing disciplines but, whenever I call cbq stop
I get a kernel panic:
> Aiee, killing interrupt handler
> Kernel panic: Attempted to kill idle task!
> In interrupt handler - not syncing
The exact line in cbq scrip...
2007 Jun 08
5
CBQ + Layer7 x Emule
...RES=0x00 ACK FIN URGP=0
Jun 8 14:18:51 fs-linux kernel: FORWARD MARK : IN=eth0 OUT=eth1 SRC=
200.244.104.10 DST=192.168.253.3 LEN=40 TOS=0x00 PREC=0x00 TTL=116 ID=7042
PROTO=TCP SPT=50675 DPT=4662 WINDOW=64952 RES=0x00 ACK FIN URGP=0
So it''s look like mark is working .
So now I use the cbq.init script with that configuration :
cat /etc/sysconfig/cbq/cbq-0002.emule_in
DEVICE=eth0,100Mbit,10Mbit
RATE=3Kbit
WEIGHT=1Kbit
PRIO=5
BOUNDED=yes
ISOLATED=yes
MARK=2
cat /etc/sysconfig/cbq/cbq-0002.emule_out
DEVICE=eth1,100Mbit,10Mbit
RATE=3Kbit
WEIGHT=1Kbit
PRIO=5
BOUNDED=yes
ISOLATED=yes
MA...
2005 Apr 27
3
invalid argument
Hi All,
I cross compiled and run tc in arm platform.
When I tried executing it I got this error.
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 mpu
64
RTNETLINK answers: Invalid argument
Is there something I''m missing here...
Thanks.
Grace
_______________________________________________
LARTC mailing list
LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc
2001 Dec 07
3
more on cbq parameters
While I''m thinking about that review of howto changes, here are a few
other responses about things I don''t believe. I''ll be interested in
more info if anyone has any.
====
[from new doc]
Besides being classful, CBQ is also a shaper and it is in that aspect
that it really doesn''t work very well. It should work like this.
I''ve not noticed that it doesn''t work well. Perhaps cause I''m
accidentally using the right parameters?
If you try to shape a 10mbit/s connection to 1mb...
2001 Dec 06
3
Anti-CBQ Statements in Howto
I find the negative attitude toward CBQ to be distracting and
non-professional in the HOWTO. I''ve re-read it for the first time in
about a month and comments like "This can be configured in a variety of
ways, which I do not understand. Use HTB" do not encourage me about the
writer.
This is not a personal critique...
2003 Sep 04
3
CBQ Rate
Hi everyone,
This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at
10Mb/s. The purpose is to test CBQ
Here is my script
-------------------------------------------------------------------
# Root qdisc
tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \
avpkt 1000 cell 8
# Classes
tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \
rate 5Mbit weight 0.3 allot 1514 avpkt...