Hello All, I just downloaded the Gluster 3.0 Storage Platform and I'm trying to install it on an Intel-based Server board (S3420GPLC) that uses the built-in raid controller. When installing CentOS 5.4 I have to add a command to the boot line (dd noprobe=ata1 for each drive) and then it prompts to load a new driver at which point I use the driver disk I've created. How do I get the downloaded ISO for the storage platform to use this driver? Right now it doesn't recognize the RAID arrays, just the physical drives. Any help is appreciated.. Thanks, Jason Adams Clearcase Technology, Inc. (e) jadams at clearcasetechnology.com <mailto:jadams at clearcasetechnology.com> (t) 614-827-1275 ext 102 (f) 614-827-0475 (w) www.clearcasetechnology.com <http://www.clearcasetechnology.com>
Hi Jason,
Thanks a lot evaluating Storage Platform. Do you who is the RAID
vendor? for the onboard card.
Regards
--
Harshavardhana
Gluster - http://www.gluster.com
On Fri, Feb 5, 2010 at 11:14 PM, Jason Adams <jadams at
clearcasetechnology.com> wrote:
> Hello All,
>
>
>
> I just downloaded the Gluster 3.0 Storage Platform and I'm trying to
> install it on an Intel-based Server board (S3420GPLC) that uses the
> built-in raid controller. When installing CentOS 5.4 I have to add a
> command to the boot line (dd noprobe=ata1 for each drive) and then it
> prompts to load a new driver at which point I use the driver disk I've
> created.
>
>
>
> How do I get the downloaded ISO for the storage platform to use this
> driver? Right now it doesn't recognize the RAID arrays, just the
> physical drives.
>
>
>
> Any help is appreciated..
>
>
>
> Thanks,
>
>
>
>
>
> Jason Adams
> Clearcase Technology, Inc.
> (e) jadams at clearcasetechnology.com
> <mailto:jadams at clearcasetechnology.com>
> (t) 614-827-1275 ext 102
> (f) 614-827-0475
> (w) www.clearcasetechnology.com <http://www.clearcasetechnology.com>
>
>
>
>
>
>
> _______________________________________________
> Gluster-users mailing list
> Gluster-users at gluster.org
> http://gluster.org/cgi-bin/mailman/listinfo/gluster-users
>
>
Hi Jason, Is the driver free software? If yes, I would like to get drive source to integrate it into Platform in upcoming release. Thanks, Regards, Bala Jason Adams wrote:> Hello All, > > > > I just downloaded the Gluster 3.0 Storage Platform and I'm trying to > install it on an Intel-based Server board (S3420GPLC) that uses the > built-in raid controller. When installing CentOS 5.4 I have to add a > command to the boot line (dd noprobe=ata1 for each drive) and then it > prompts to load a new driver at which point I use the driver disk I've > created. > > > > How do I get the downloaded ISO for the storage platform to use this > driver? Right now it doesn't recognize the RAID arrays, just the > physical drives. > > > > Any help is appreciated.. > > > > Thanks, > > > > > > Jason Adams > Clearcase Technology, Inc. > (e) jadams at clearcasetechnology.com > <mailto:jadams at clearcasetechnology.com> > (t) 614-827-1275 ext 102 > (f) 614-827-0475 > (w) www.clearcasetechnology.com <http://www.clearcasetechnology.com> > > > > > > > > > ------------------------------------------------------------------------ > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://gluster.org/cgi-bin/mailman/listinfo/gluster-users