It is saying that missing bootable media and what is found is not UEFI.
From: wlosh at bsdimp.com [mailto:wlosh at bsdimp.com] On Behalf Of Warner Losh
Sent: Monday, 4 September 2017 10:44 AM
To: Priyadarshana Chandrasena
Cc: Maciej Suszko; FreeBSD-STABLE Mailing List
Subject: Re: HP Smart array P440 support
Our UEFI stuff is designed so that the defaults will just work... I find it odd
that your computer doesn't work with the defaults. IT's BIOS doesn't
even consider the USB drive a bootable device?
Warner
On Sun, Sep 3, 2017 at 7:10 PM, Priyadarshana Chandrasena <vpc at
ulka.com.au> wrote:
I tried to install 11.1 but I still have the same error. UEFI boot mode does
not see my usb bootable media as of type UEFI. So still the Legacy BIOS is
the only option. Do I need to create the usb UEFI when I create the usb boot
disk?.
-----Original Message-----
From: Maciej Suszko [mailto:maciej at suszko.eu]
Sent: Monday, 4 September 2017 4:49 AM
To: Priyadarshana Chandrasena
Cc: FreeBSD-stable at FreeBSD.org
Subject: Re: HP Smart array P440 support
"Priyadarshana Chandrasena" <vpc at ulka.com.au>
wrote:> I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it.
> I have a HP smart array P440 in my server. I can not find out anywhere
> if ciss driver support include HP Gen 9 storage controllers. Could
> you please update the ciss driver in 10.3?
Hi,
Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array).
In a few days I plan to boot it in HBA mode, we'll see if it's working.
A few messages:
#v+
root at storage-04:~ # uname -a
FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22
06:12:04 UTC 2017
root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
root at storage-04:~ # grep ciss /var/run/dmesg.boot
ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem
0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on
pci2
ciss0: PERFORMANT Transport
da2 at ciss0 bus 0 scbus2 target 0 lun 0
root at storage-04:~ # camcontrol inquiry da2
pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
pass2: Serial Number PDNMF0ARH401MI
pass2: 135.168MB/s transfers, Command Queueing Enabled
#v-
--
regards, Maciej Suszko.
_______________________________________________
freebsd-stable at freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe at
freebsd.org"