I tried to install 11.1 but I still have the same error. UEFI boot mode does not see my usb bootable media as of type UEFI. So still the Legacy BIOS is the only option. Do I need to create the usb UEFI when I create the usb boot disk?. -----Original Message----- From: Maciej Suszko [mailto:maciej at suszko.eu] Sent: Monday, 4 September 2017 4:49 AM To: Priyadarshana Chandrasena Cc: FreeBSD-stable at FreeBSD.org Subject: Re: HP Smart array P440 support "Priyadarshana Chandrasena" <vpc at ulka.com.au> wrote:> I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it. > I have a HP smart array P440 in my server. I can not find out anywhere > if ciss driver support include HP Gen 9 storage controllers. Could > you please update the ciss driver in 10.3?Hi, Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array). In a few days I plan to boot it in HBA mode, we'll see if it's working. A few messages: #v+ root at storage-04:~ # uname -a FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22 06:12:04 UTC 2017 root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 root at storage-04:~ # grep ciss /var/run/dmesg.boot ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on pci2 ciss0: PERFORMANT Transport da2 at ciss0 bus 0 scbus2 target 0 lun 0 root at storage-04:~ # camcontrol inquiry da2 pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device pass2: Serial Number PDNMF0ARH401MI pass2: 135.168MB/s transfers, Command Queueing Enabled #v- -- regards, Maciej Suszko.
Our UEFI stuff is designed so that the defaults will just work... I find it odd that your computer doesn't work with the defaults. IT's BIOS doesn't even consider the USB drive a bootable device? Warner On Sun, Sep 3, 2017 at 7:10 PM, Priyadarshana Chandrasena <vpc at ulka.com.au> wrote:> I tried to install 11.1 but I still have the same error. UEFI boot mode > does > not see my usb bootable media as of type UEFI. So still the Legacy BIOS is > the only option. Do I need to create the usb UEFI when I create the usb > boot > disk?. > > -----Original Message----- > From: Maciej Suszko [mailto:maciej at suszko.eu] > Sent: Monday, 4 September 2017 4:49 AM > To: Priyadarshana Chandrasena > Cc: FreeBSD-stable at FreeBSD.org > Subject: Re: HP Smart array P440 support > > "Priyadarshana Chandrasena" <vpc at ulka.com.au> wrote: > > I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it. > > I have a HP smart array P440 in my server. I can not find out anywhere > > if ciss driver support include HP Gen 9 storage controllers. Could > > you please update the ciss driver in 10.3? > > Hi, > > Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array). > In a few days I plan to boot it in HBA mode, we'll see if it's working. > > A few messages: > #v+ > root at storage-04:~ # uname -a > FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb > 22 > 06:12:04 UTC 2017 > root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 > > root at storage-04:~ # grep ciss /var/run/dmesg.boot > ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem > 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on > pci2 > ciss0: PERFORMANT Transport > da2 at ciss0 bus 0 scbus2 target 0 lun 0 > > root at storage-04:~ # camcontrol inquiry da2 > pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device > pass2: Serial Number PDNMF0ARH401MI > pass2: 135.168MB/s transfers, Command Queueing Enabled > #v- > -- > regards, Maciej Suszko. > > _______________________________________________ > freebsd-stable at freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org" >
On Mon, 4 Sep 2017 10:40:11 +0930 "Priyadarshana Chandrasena" <vpc at ulka.com.au> wrote:> I tried to install 11.1 but I still have the same error. UEFI boot mode does > not see my usb bootable media as of type UEFI. So still the Legacy BIOS is > the only option. Do I need to create the usb UEFI when I create the usb boot > disk?.I don't remember how the OS was installed, but I'm sure I haven't used USB, probably used PXE or virtual CD using iLO. -- regards, Maciej Suszko. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 195 bytes Desc: OpenPGP digital signature URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20170904/cd26e6c8/attachment.sig>
Hello Have you tried to update the servers firmware using the hp spp or update tool . In the past with 9.3 and 10.0 I had boot issues until I updated the servers firmware. I only have a ml10 with a p410 so I can't test much ; my job also moved to dell about 2 years ago . --- Mark Saad | nonesuch at longcount.org Sep 3, 2017, at 9:10 PM, Priyadarshana Chandrasena <vpc at ulka.com.au> wrote:> > I tried to install 11.1 but I still have the same error. UEFI boot mode does > not see my usb bootable media as of type UEFI. So still the Legacy BIOS is > the only option. Do I need to create the usb UEFI when I create the usb boot > disk?. > > -----Original Message----- > From: Maciej Suszko [mailto:maciej at suszko.eu] > Sent: Monday, 4 September 2017 4:49 AM > To: Priyadarshana Chandrasena > Cc: FreeBSD-stable at FreeBSD.org > Subject: Re: HP Smart array P440 support > > "Priyadarshana Chandrasena" <vpc at ulka.com.au> wrote: >> I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it. >> I have a HP smart array P440 in my server. I can not find out anywhere >> if ciss driver support include HP Gen 9 storage controllers. Could >> you please update the ciss driver in 10.3? > > Hi, > > Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array). > In a few days I plan to boot it in HBA mode, we'll see if it's working. > > A few messages: > #v+ > root at storage-04:~ # uname -a > FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb 22 > 06:12:04 UTC 2017 > root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64 > > root at storage-04:~ # grep ciss /var/run/dmesg.boot > ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem > 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on > pci2 > ciss0: PERFORMANT Transport > da2 at ciss0 bus 0 scbus2 target 0 lun 0 > > root at storage-04:~ # camcontrol inquiry da2 > pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device > pass2: Serial Number PDNMF0ARH401MI > pass2: 135.168MB/s transfers, Command Queueing Enabled > #v- > -- > regards, Maciej Suszko. > > _______________________________________________ > freebsd-stable at freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"