I maintain that it's wrong.
However, to make progress, what version of the BIOS is it? What
motherboard? What UEFI compliance does it claim?
Warner
On Sun, Sep 3, 2017 at 7:16 PM, Priyadarshana Chandrasena <vpc at
ulka.com.au>
wrote:
> It is saying that missing bootable media and what is found is not UEFI.
>
>
>
> *From:* wlosh at bsdimp.com [mailto:wlosh at bsdimp.com] *On Behalf Of
*Warner
> Losh
> *Sent:* Monday, 4 September 2017 10:44 AM
> *To:* Priyadarshana Chandrasena
> *Cc:* Maciej Suszko; FreeBSD-STABLE Mailing List
>
> *Subject:* Re: HP Smart array P440 support
>
>
>
> Our UEFI stuff is designed so that the defaults will just work... I find
> it odd that your computer doesn't work with the defaults. IT's BIOS
doesn't
> even consider the USB drive a bootable device?
>
>
>
> Warner
>
>
>
>
>
> On Sun, Sep 3, 2017 at 7:10 PM, Priyadarshana Chandrasena <vpc at
ulka.com.au>
> wrote:
>
> I tried to install 11.1 but I still have the same error. UEFI boot mode
> does
> not see my usb bootable media as of type UEFI. So still the Legacy BIOS is
> the only option. Do I need to create the usb UEFI when I create the usb
> boot
> disk?.
>
> -----Original Message-----
> From: Maciej Suszko [mailto:maciej at suszko.eu]
> Sent: Monday, 4 September 2017 4:49 AM
> To: Priyadarshana Chandrasena
> Cc: FreeBSD-stable at FreeBSD.org
> Subject: Re: HP Smart array P440 support
>
> "Priyadarshana Chandrasena" <vpc at ulka.com.au> wrote:
> > I have HP DL20 Gen 9 server. But I can not install FreeBSD 10.2 in it.
> > I have a HP smart array P440 in my server. I can not find out anywhere
> > if ciss driver support include HP Gen 9 storage controllers. Could
> > you please update the ciss driver in 10.3?
>
> Hi,
>
> Got two DL20 with P440, UEFI booted 11.0 to logical disk (raid array).
> In a few days I plan to boot it in HBA mode, we'll see if it's
working.
>
> A few messages:
> #v+
> root at storage-04:~ # uname -a
> FreeBSD storage-04.gr 11.0-RELEASE-p8 FreeBSD 11.0-RELEASE-p8 #0: Wed Feb
> 22
> 06:12:04 UTC 2017
> root at amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
>
> root at storage-04:~ # grep ciss /var/run/dmesg.boot
> ciss0: <HP Smart Array P440> port 0x2000-0x20ff mem
> 0x92c00000-0x92cfffff,0x92d00000-0x92d003ff at device 0.0 numa-domain 0 on
> pci2
> ciss0: PERFORMANT Transport
> da2 at ciss0 bus 0 scbus2 target 0 lun 0
>
> root at storage-04:~ # camcontrol inquiry da2
> pass2: <HP RAID 1(1+0) OK> Fixed Direct Access SPC-3 SCSI device
> pass2: Serial Number PDNMF0ARH401MI
> pass2: 135.168MB/s transfers, Command Queueing Enabled
> #v-
> --
> regards, Maciej Suszko.
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at
freebsd.org"
>
>
>