search for: sa0

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Jul 3 22:55:18 ene /kernel: ahc2: Dumping Card State while idle, at S...

...dd can't write the last short data block to SCSI DDS streamer. Moreover, it can't write variable length records, only in multiples of 1024. This problem was introduced in RELENG_4 between Aug 14 and Sep 10 2003. >How-To-Repeat: corwin# dd if=/dev/zero ibs=1024 count=1 obs=1024 of=/dev/sa0 1+0 records in 1+0 records out 1024 bytes transferred in 0.001765 secs (580166 bytes/sec) corwin# 1024 bytes are written, all OK. corwin# dd if=/dev/zero ibs=1025 count=1 obs=1024 of=/dev/sa0 dd: /dev/sa0: Invalid argument 1+0 records in 1+0 records out 1024 bytes transferred in 0.004238...

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may have changed > (sa0:a...

...;MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: <unknown card> (vendor=0x11d4, dev=0x1805) at 13.0 irq 15 isab0: <PCI to EISA bridge (vendor=0e11 device=0001)> at device 20.0 on pci0 eisa0: <EISA bus> on isab0 mainboard0: <CPQ0551 (System Board)> on eisa0 slot 0 isa0: <ISA bus> on isab0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xedfff,0xee000-0xeffff on isa0 ep0: <3Com 3C509-Combo EtherLink III> at port 0x320-0x32f irq 10 on isa0 ep0: Etherne...

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

...00000-0xc6bfffff,0xc6afb000-0xc6afbfff irq 15 at device 16.0 on pci0 fxp0: Ethernet address 00:d0:b7:20:bd:ab inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf100-0xf10f at device 20.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 irq 0 chip1: <Intel 82371AB Power management controlle...

Hello, I am having a problem with a new server running FreeBSD 4.9-PRERELEASE. Once every two days or so, it reboots itself.. there is no exact time of the day it reboots.. It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today). I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...

...n controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <VIA VT6202 USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4 uhub4: 8 ports with 8 removable, self powered isab0: <PCI-ISA bridge> at device 17.0 on pci0 isa0: <ISA bus> on isab0 vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem 0xe1044000-0xe10440ff irq 23 at device 18.0 on pci0 vr0: Quirks: 0x0 vr0: Revision: 0x78 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0 ukphy0: 10ba...

...af9fff irq 18 at device 7.0 on pci0 fxp0: Ethernet address 00:e0:81:00:f0:d7 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI-ISA bridge> port 0x500-0x50f at device 15.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 15.1 (no driver attached) pcib2: <ServerWorks host to PCI bridge> at pcibus 2 on motherboard pci2: <PCI bus> on pcib2 pcib3: <PCI-PCI bridge> at device 2.0 on pci2 pci3: <PCI bus> on pcib3 IOAPIC #1 intpin 1...

...is question, you can assume HexagonMachineScheduler.cpp == MachineScheduler.cpp and VLIWMachineScheduler == ScheduleDAGMI The instruction being moved is a simple call: let isCall = 1, neverHasSideEffects = 1, Defs = [D0, D1, D2, D3, D4, D5, D6, D7, R28, R31, P0, P1, P2, P3, LC0, LC1, SA0, SA1, USR] in { def CALLv3 : JInst<(outs), (ins calltarget:$dst), "call $dst", []>, Requires<[HasV3T]>; } CALLv3 <ga:@printf>, %D0<imp-def,dead>, %D1<imp-def,dead>, %D2<imp-def,dead>, %R31<imp-def>, %R0<imp-use,kill>, ... An...

...iibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pci0: <base peripheral> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5fc0000-0xf5fc0fff irq 11...

...: <VIA 83C572 USB controller> on uhci2 usb2: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 16.3 irq 14 isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 ATA133 controller> at device 17.1 on pci0 atapci0: ATA channel disabled by BIOS orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xd4000-0xd4fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on is...

On Aug 13, 2012, at 8:34 AM, Sergei Larin <slarin at codeaurora.org> wrote: > Andy, > > Yes, this is what Arnold has suggested also, and from this point it looks > like it should work, but it will require parsing the bundle every time we > care to know whether this is a real use or a conditional def. This might > become awkward... but I guess I should provide a better

...therboard pci0: <PCI bus> on pcib0 pcib2: <Intel 82443GX (440 GX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <Trident model 9750 VGA-compatible display device> at 0.0 irq 11 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xffa0-0xffaf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xef80-0xef9f irq 9 at dev ice 7.2 on pci0 usb0: <Intel 8...

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it would

...0fff irq 11 at device 12.0 on pci0 fxp1: Ethernet address 00:02:b3:b5:67:1e inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xcc000-0xcd7ff,0xd0000-0xd57ff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 k...

...10000 card=0x00409005 chip=0x80169005 rev=0x10 hdr=0x00 vendor = 'Adaptec Inc' device = 'ASC-39320A Ultra320 SCSI Controller' class = mass storage subclass = SCSI scbus0 on ahd0 bus 0: <SEAGATE DAT DAT72-052 A16E> at scbus0 target 6 lun 0 (sa0,pass0) < > at scbus0 target -1 lun -1 () scbus1 on ahd1 bus 0: < > at scbus1 target -1 lun -1 () scbus-1 on xpt0 bus 0: < > at scbus-1 target -1 lun -1 (xpt0) Thanks. -------------- next...

...neScheduler.cpp == MachineScheduler.cpp and > VLIWMachineScheduler == ScheduleDAGMI > > > The instruction being moved is a simple call: > > let isCall = 1, neverHasSideEffects = 1, > Defs = [D0, D1, D2, D3, D4, D5, D6, D7, R28, R31, > P0, P1, P2, P3, LC0, LC1, SA0, SA1, USR] in { > def CALLv3 : JInst<(outs), (ins calltarget:$dst), > "call $dst", []>, Requires<[HasV3T]>; } > > CALLv3 <ga:@printf>, %D0<imp-def,dead>, %D1<imp-def,dead>, %D2<imp- > def,dead>, %R31<imp-def>, %R0&lt...

.../+$UH M1LL[XQ0S6HQ@,Y,!!W `!\QH`<]W-:-5%=6;^USY"JO>A&SI1,B=IP>QB!Z$ M4R9X3O1#,: <X0`.X( >!/!\ASV("B@U*Y3D##4\,Q$:#N `#E!JP,/JA;2R M,ITU2FD6!G_?N9+.NMBZR)5,+U?266^DK4BNI!_/E9QJK^]C]OJ>,5?2.25< MGGJN9$56)SBGC66#C.\]#D8YI%G)F6(<C%6C347BX/B&_,=3'8Q4E"(.SA0' M\_R!1IM^'$PF5<7;O!K)[BKYS7J]D_:A11A);R*=T&22#TIJS602@\=,(L ! M',#!TC@H#Q&^'+3[W<9Y>R->X@83-\\,7BNI&'_X^+>MUGFGVQD,^XUAKW_4 M'<2@UNHU!_&=\N%S679YC!]_]/+O"WET8B-S8Y6=&TNE+^2#M<)P<,DB^D*Y M4 \N@>!<HBG,:$RN./]ESI:="YM...