Hi,
I tried applying
http://people.freebsd.org/~anholt/dri/files/drm-stable-20030411.diff to
stable from today (using device radeondrm and options DRM_LINUX).
Kernel reports drm seems to be there:
drm0: <ATI Radeon QY RV100 VE> port 0x9000-0x90ff mem
0xed000000-0xed00ffff,0xe$
info: [drm] Initialized radeon 1.8.0 20020828 on minor 0
Now, when I try to start XFree86 everything looks fine at first:
root@noname:~# startx
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 4.8 i386 [ELF]
Build Date: 23 April 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Apr 23 20:36:28
2003
(==) Using config file: "/etc/X11/XF86Config"
But I get this in /var/log/messages:
Apr 23 20:36:29 noname /kernel: error: [drm:radeon_unlock] *ERROR*
Process 338 using kernel context 0
And glxinfo reports that I have no direct rendering (output:
http://anders.fix.no/test/glxinfo.txt). :(
My XF86Config: http://anders.fix.no/test/XF86Config.
Excerpt from pciconf -l -v output:
drm0@pci1:0:0: class=0x030000 card=0x7112174b chip=0x51591002 rev=0x00
hdr=0x00
vendor = 'ATI Technologies'
device = 'Radeon VE QY Radeon 7000 / Radeon VE'
class = display
subclass = VGA
scanpci reports this about the Radeon:
pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x5159
ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
How do I get dri/drm to work? Has anyone got dri/drm in -stable with
XFree86 4.3.0 running?
Cheers,
--
Anders.
Hi, Erm. Silly me. I wasn't getting the "[drm] AGP at .." message, because I had forgotten to remove agp_load="YES" from /boot/loader.conf. Now dri/drm works nicely. This increased glxgears FPS from 280 to 492! Wohoo! :-) Cheers, -- Anders.
On Wed, 2003-04-23 at 12:01, Anders Nordby wrote:> Hi, > > I tried applying > http://people.freebsd.org/~anholt/dri/files/drm-stable-20030411.diff to > stable from today (using device radeondrm and options DRM_LINUX). > Kernel reports drm seems to be there: > > drm0: <ATI Radeon QY RV100 VE> port 0x9000-0x90ff mem > 0xed000000-0xed00ffff,0xe$ > info: [drm] Initialized radeon 1.8.0 20020828 on minor 0 > > Now, when I try to start XFree86 everything looks fine at first: > > root@noname:~# startx > Using authority file /root/.Xauthority > Writing authority file /root/.Xauthority > Using authority file /root/.Xauthority > Writing authority file /root/.Xauthority > > > XFree86 Version 4.3.0 > Release Date: 27 February 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: FreeBSD 4.8 i386 [ELF] > Build Date: 23 April 2003 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Wed Apr 23 20:36:28 2003 > (==) Using config file: "/etc/X11/XF86Config" > > But I get this in /var/log/messages: > > Apr 23 20:36:29 noname /kernel: error: [drm:radeon_unlock] *ERROR* > Process 338 using kernel context 0That's interesting. I thought those messages were dead. I assume you get that every time you start X?> And glxinfo reports that I have no direct rendering (output: > http://anders.fix.no/test/glxinfo.txt). :(Could you do it again with LIBGL_DEBUG=verbose set? Also, could you send the XFree86.0.log. -- Eric Anholt eta@lclark.edu http://people.freebsd.org/~anholt/ anholt@FreeBSD.org