John-- Thanks for the suggestion. I finally had a chance to get to the system in question, It was the only one of many that exhibited the USB hang. I tried a reboot with the two USB disks disconnected. Everything worked. I plugged them in, and then did both "lsusb -v" and "lshw", and again, everything worked. Continuing my test: Reboot with both drives plugged in: all worked. Power off, wait 1 minute for everything to quiet down, power on: all worked. So, I can't reproduce the problem. I guess I have to blame cosmic rays or those nasty gremlins that inhabit our IC's. :-) Or is it related to the annoying spin-down and spin-up delay of external USB disks. I have issues with the spin-up delay on other CentOS platforms, and have managed to find a kludge to avoid it most of the time. Windows 10 seems to handle the delay well. Thanks for your idea. At least it led me to "lsusb -v". David At 05:33 PM 1/11/2018, Stephen John Smoogen wrote:>On 11 January 2018 at 20:23, david <david at daku.org> wrote: > > Folks > > > > I've been running lshw for years in both Centos 6 and Centos 7, yet just > > recently it started hanging. Neither a Control^C nor a "kill" of the > > process cured the hang; only a reboot. > > > >Is this just one system or a range of boxes? I just ran it on 2 >different ones running CentOS 7 and it worked fine there. If it is >just one particular hardware then look through the lshw man page and >try the versions of something like > >lshw -disable usb > >to see if it still happens. [It might require other tests also.] > > > > When I run it by hand from the command line, it displays stuff on the next > > line overwriting it with things like PCI, USB. And USB is the last thing I > > see. A Control-C does not unlock it. > > > > I am running lshw-B.02.18-7.el7.x86_64. The CPU is an Intel I7-3770K, > > running CentOS 7.4.1708 > > > > Is there any idea? Is there some alternate program that could list the > > hardware? > > > > Thanks > > > > David > >
On Jan 12, 2018, at 3:18 PM, david <david at daku.org> wrote:> > Or is it related to the annoying spin-down and spin-up delay of external USB disks.More likely, crap hardware, which is awfully hard to avoid in USB-land. Just the other day, I traced a machine that failed to reboot to an external USB disk. Unplug it, machine boots right up. Move the same disk to a machine as different as can be ? different hardware, different OS, different firmware? ? and it kernel panic?d that box within about a minute of plugging it in. Then there was the time a USB enclosure ate my data. Only the filesystem?s strong checksums saved me that time. I moved the disk to another enclosure, and the bad sector writes stopped occurring; all else remained the same. The problem is a market conditioned to believe that it should expect to pay $13.64 for an enclosure, power supply, and interface cable and get a 5-star product. If you put a $200 enclosure in front of the vast majority of members of that market, they?d either disbelieve the price or rate it 1 star for bad value, even if it was guaranteed to outlast the prevalence of the USB standard it supports, had a higher transfer rate, and had guaranteed data corruption rates best given in scientific notation with large negative exponents. Whenever I have a machine with an unkillable userspace program, I run dtrace, and almost always get told exactly which bit of hardware (and therefore which kernel driver) is holding the machine hostage. You might be able to dig the same info out of /var/log/messages, given close-enough timestamps.
On Jan 15, 2018, at 8:57 AM, Warren Young <warren at etr-usa.com> wrote:> > Whenever I have a machine with an unkillable userspace program, I run dtraceSorry, got my OS wires crossed: I mean dmesg. Though dtrace could help, too, if you?ve managed to build that for CentOS; I hear it can be dnoe. :)
Warren Thanks for the thoughts. Even with 'dmesg', I found nothing. The reboot got rid of the problem and it continues to run perfectly in the same configuration. I, too, have a slight dislike for external USB disks, and much prefer internal drives for esveral reasons: - Internal drives are protected by being inside a tower and thus have less chance of falling or being bumped than free-standing external boxes - Fewer plugs and wires - Power-up sequencing is coordinated with CPU power - SATA3 is faster than USB3 (I think) But sometimes one has no choice. The Mac pro may look cute in its black cylinder, for example, but there's no place to add anything to it. External drives are the only choice that I know of. David At 07:57 AM 1/15/2018, Warren Young wrote:>On Jan 12, 2018, at 3:18 PM, david <david at daku.org> wrote: > > > > Or is it related to the annoying spin-down > and spin-up delay of external USB disks. > >More likely, crap hardware, which is awfully hard to avoid in USB-land. > >Just the other day, I traced a machine that >failed to reboot to an external USB >disk. Unplug it, machine boots right up. Move >the same disk to a machine as different as can >be ? different hardware, different OS, different >firmware? and it kernel panic???d that box>within about a minute of plugging it in. >in. > >Then there was the time a USB enclosure ate my >data. Only the filesystem???s strong checksums >saved me that time. I moved the disk to another >enclosure, and the bad sector writes stopped >occurring; all else remained the same. > >The problem is a market conditioned to believe >that it should expect to pay $13.64 for an >enclosure, power supply, and interface cable and >get a 5-star product. If you put a $200 >enclosure in front of the vast majority of >members of that market, they???d either >disbelieve the price or rate it 1 star for bad >value, even if it was guaranteed to outlast the >prevalence of the USB standard it supports, had >a higher transfer rate, and had guaranteed data >corruption rates best given in scientific >notation with large negative exponents. > >Whenever I have a machine with an unkillable >userspace program, I run dtrace, and almost >always get told exactly which bit of hardware >(and therefore which kernel driver) is holding the machine hostage. > >You might be able to dig the same info out of >/var/log/messages, given close-enough timestamps. >_______________________________________________ >CentOS mailing list >CentOS at centos.org >https://lists.centos.org/mailman/listinfo/centos