On 03/28/2017 11:40 PM, Alice Wonder wrote:> On 03/28/2017 05:53 PM, ken wrote: >> The www has failed me with this, so I'm trying you guys. Sound worked >> great out of the box when I installed 7.2... Yay! I could watch all >> kinds of videos, like on facebook and youtube. And I could listen to >> most podcasts too. But then something happened. It was either a kernel >> upgrade or that I installed vlc (for watching videos on DVD) and the >> whole stack of codecs for it... I don't know exactly when, but at some >> point I no longer had sound with youtube and other web videos. The >> videos played fine, just no sound. Note that using vlc, both video and >> the audio with it play just fine. I need to select the audio driver >> (from a list in a vlc menu), however, else the sound won't work in vlc >> either. >> >> If I go into the Applications menu, then System Tools -> Settings -> >> Sound, under "Choose a device for sound output:" there are no devices >> listed. There used to be. >> >> If I run "aplayer file.wav", nothing plays (no sound at all) and I get >> the error "main:786: audio open error: No such file or directory". If, >> on the other hand, I run "aplay file.wav -D plughw:0" (i.e., specify >> the/a device), I do get sound, the file does play. >> >> I ran alsa-info.sh and it posted tons of info from it on my setup at >> http://www.alsa-project.org/db/?f=1dba91886be054df4816000768a0f5b109947a48. >> >> Yet it still doesn't tell me what's missing. >> >> Anyone here have an idea...? or thoughts about where to look next? >> >> tia, >> ken > > I have similar issue with USB headphones. Worked fine in 7.2 but in > 7.3 I frequently have to unplug and plug them back in before it > finally is able to be selected from the menus as my output. > > Once it is selected, it stays selected until next reboot.Alice, Thanks for your reply. I believe you and I are looking at two separate problems. My system is capable of switching between the onboard speakers and the headphones with no problem at all (when the sound is working at all). That is, when there's sound out of the onboards, I can plug in the headphones and sound instantly comes out of them, and vice versa... even in the middle of one and the same video. In your case the problem may have more to do with USB. USB is notoriously slow... at least it used to be. This is due to timing, i.e., after loading the USB sub-system, the system has to query the USB device to find out what it is (e.g., mouse, joystick, headphones, touchpad, etc.) and there are a bazillion different kinds of USB devices... a long list of things to query. Not only that, but a single query takes time: the system has to give the device time to respond-- it used to be a second or two. And there are ever more USB devices. Maybe too your headphones are near the bottom of the long list of USB devices. I don't know that this is your situation. It could be something else (a half dozen other hang-ups). But you might want to test by plugging in your USB headphones and then leaving the plug in, waiting a couple minutes to see if they start to work. Alice, could you please post the output of these three commands (for comparison purposes): uname -r ps -ef|grep -i alsa aplayer -L Thanks.
On 03/29/2017 04:05 AM, ken wrote:> On 03/28/2017 11:40 PM, Alice Wonder wrote: >> On 03/28/2017 05:53 PM, ken wrote: >>> The www has failed me with this, so I'm trying you guys. Sound worked >>> great out of the box when I installed 7.2... Yay! I could watch all >>> kinds of videos, like on facebook and youtube. And I could listen to >>> most podcasts too. But then something happened. It was either a kernel >>> upgrade or that I installed vlc (for watching videos on DVD) and the >>> whole stack of codecs for it... I don't know exactly when, but at some >>> point I no longer had sound with youtube and other web videos. The >>> videos played fine, just no sound. Note that using vlc, both video and >>> the audio with it play just fine. I need to select the audio driver >>> (from a list in a vlc menu), however, else the sound won't work in vlc >>> either. >>> >>> If I go into the Applications menu, then System Tools -> Settings -> >>> Sound, under "Choose a device for sound output:" there are no devices >>> listed. There used to be. >>> >>> If I run "aplayer file.wav", nothing plays (no sound at all) and I get >>> the error "main:786: audio open error: No such file or directory". If, >>> on the other hand, I run "aplay file.wav -D plughw:0" (i.e., specify >>> the/a device), I do get sound, the file does play. >>> >>> I ran alsa-info.sh and it posted tons of info from it on my setup at >>> http://www.alsa-project.org/db/?f=1dba91886be054df4816000768a0f5b109947a48. >>> >>> Yet it still doesn't tell me what's missing. >>> >>> Anyone here have an idea...? or thoughts about where to look next? >>> >>> tia, >>> ken >> >> I have similar issue with USB headphones. Worked fine in 7.2 but in >> 7.3 I frequently have to unplug and plug them back in before it >> finally is able to be selected from the menus as my output. >> >> Once it is selected, it stays selected until next reboot. > > Alice, > > Thanks for your reply. I believe you and I are looking at two separate > problems. My system is capable of switching between the onboard > speakers and the headphones with no problem at all (when the sound is > working at all). That is, when there's sound out of the onboards, I can > plug in the headphones and sound instantly comes out of them, and vice > versa... even in the middle of one and the same video. > > In your case the problem may have more to do with USB. USB is > notoriously slow... at least it used to be. This is due to timing, > i.e., after loading the USB sub-system, the system has to query the USB > device to find out what it is (e.g., mouse, joystick, headphones, > touchpad, etc.) and there are a bazillion different kinds of USB > devices... a long list of things to query. Not only that, but a single > query takes time: the system has to give the device time to respond-- it > used to be a second or two. And there are ever more USB devices. > Maybe too your headphones are near the bottom of the long list of USB > devices. > > I don't know that this is your situation. It could be something else (a > half dozen other hang-ups). But you might want to test by plugging in > your USB headphones and then leaving the plug in, waiting a couple > minutes to see if they start to work. > > Alice, could you please post the output of these three commands (for > comparison purposes): > > uname -r > ps -ef|grep -i alsa > aplayer -L > > Thanks. > >[alice at localhost ~]$ uname -r 3.10.0-514.6.2.el7.x86_64 [alice at localhost ~]$ ps -ef |grep -i alsa root 858 1 0 Feb27 ? 00:00:00 /usr/sbin/alsactl -s -n 19 -c -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf --initfile=/lib/alsa/init/00main rdaemon alice 29238 29155 0 09:03 pts/19 00:00:00 grep --color=auto -i alsa [alice at localhost ~]$ aplayer -L bash: aplayer: command not found... [alice at localhost ~]$ -=- Intel xeon on supermicro board No onboard sound but unfortunately the video card has Intel HD audio associated with the HDMI out that for some reason the system always defaults to after boot even though there is no audio out on the video card (nvidia card) other than the HDMI which I only use for video. I had blacklisted the Intel HD and that worked under CentOS 7.2 but I couldn't USB audio to work in 7.3 until I removed the blacklisted Intel HD driver, but I'm not sure if that was cause and effect or coincidence. I really wish USB sound would "just work" and that the sound preferences would remember I prefer USB after a reboot. Linux use to be better about that sort of thing.
On 03/29/2017 12:08 PM, Alice Wonder wrote:> On 03/29/2017 04:05 AM, ken wrote: >> On 03/28/2017 11:40 PM, Alice Wonder wrote: >>> On 03/28/2017 05:53 PM, ken wrote: >>>> The www has failed me with this, so I'm trying you guys. Sound worked >>>> great out of the box when I installed 7.2... Yay! I could watch all >>>> kinds of videos, like on facebook and youtube. And I could listen to >>>> most podcasts too. But then something happened. It was either a >>>> kernel >>>> upgrade or that I installed vlc (for watching videos on DVD) and the >>>> whole stack of codecs for it... I don't know exactly when, but at some >>>> point I no longer had sound with youtube and other web videos. The >>>> videos played fine, just no sound. Note that using vlc, both video >>>> and >>>> the audio with it play just fine. I need to select the audio driver >>>> (from a list in a vlc menu), however, else the sound won't work in vlc >>>> either. >>>> >>>> If I go into the Applications menu, then System Tools -> Settings -> >>>> Sound, under "Choose a device for sound output:" there are no devices >>>> listed. There used to be. >>>> >>>> If I run "aplayer file.wav", nothing plays (no sound at all) and I get >>>> the error "main:786: audio open error: No such file or directory". >>>> If, >>>> on the other hand, I run "aplay file.wav -D plughw:0" (i.e., specify >>>> the/a device), I do get sound, the file does play. >>>> >>>> I ran alsa-info.sh and it posted tons of info from it on my setup at >>>> http://www.alsa-project.org/db/?f=1dba91886be054df4816000768a0f5b109947a48. >>>> >>>> >>>> Yet it still doesn't tell me what's missing. >>>> >>>> Anyone here have an idea...? or thoughts about where to look next? >>>> >>>> tia, >>>> ken >>> >>> I have similar issue with USB headphones. Worked fine in 7.2 but in >>> 7.3 I frequently have to unplug and plug them back in before it >>> finally is able to be selected from the menus as my output. >>> >>> Once it is selected, it stays selected until next reboot. >> >> Alice, >> >> Thanks for your reply. I believe you and I are looking at two separate >> problems. My system is capable of switching between the onboard >> speakers and the headphones with no problem at all (when the sound is >> working at all). That is, when there's sound out of the onboards, I can >> plug in the headphones and sound instantly comes out of them, and vice >> versa... even in the middle of one and the same video. >> >> In your case the problem may have more to do with USB. USB is >> notoriously slow... at least it used to be. This is due to timing, >> i.e., after loading the USB sub-system, the system has to query the USB >> device to find out what it is (e.g., mouse, joystick, headphones, >> touchpad, etc.) and there are a bazillion different kinds of USB >> devices... a long list of things to query. Not only that, but a single >> query takes time: the system has to give the device time to respond-- it >> used to be a second or two. And there are ever more USB devices. >> Maybe too your headphones are near the bottom of the long list of USB >> devices. >> >> I don't know that this is your situation. It could be something else (a >> half dozen other hang-ups). But you might want to test by plugging in >> your USB headphones and then leaving the plug in, waiting a couple >> minutes to see if they start to work. >> >> Alice, could you please post the output of these three commands (for >> comparison purposes): >> >> uname -r >> ps -ef|grep -i alsa >> aplayer -L >> >> Thanks. >> >> > > [alice at localhost ~]$ uname -r > 3.10.0-514.6.2.el7.x86_64It looks like either you need to do a kernel upgrade or you haven't rebooted since the most recent. I have 3.10.0-514.10.2.el7.x86_64.> [alice at localhost ~]$ ps -ef |grep -i alsa > root 858 1 0 Feb27 ? 00:00:00 /usr/sbin/alsactl -s > -n 19 -c -E ALSA_CONFIG_PATH=/etc/alsa/alsactl.conf > --initfile=/lib/alsa/init/00main rdaemon >This is the same as what I have. So the same command is fired up to run alsa. I looked at the two files (both text files) and they're both, to me, inscrutable. The second one, is actually a program, code which programmatically configures alsactl. The programming language it uses is fairly normal and simple, but even with that, with all the variables and other files it uses and various operations it invokes, and then all the knowledge of internals of audio and the sound card it entails, it would take quite a bit of study to get a grip on it. Getting some human help there or a good doc or two (in addition to its man page) might even make it possible to fathom... :) then possibly happen onto the fix.> [alice at localhost ~]$ aplayer -L > bash: aplayer: command not found... >Sorry, Alice. I shouldn't have trusted memory. The actual command is "aplay -L".> > -=- > > Intel xeon on supermicro boardNice.> > No onboard sound but unfortunately the video card has Intel HD audio > associated with the HDMI out that for some reason the system always > defaults to after boot even though there is no audio out on the video > card (nvidia card) other than the HDMI which I only use for video.Your system doesn't have a plug (typically a three- or four-connector (sub)mini-D) for analog sound?> > I had blacklisted the Intel HD and that worked under CentOS 7.2 but I > couldn't USB audio to work in 7.3 until I removed the blacklisted > Intel HD driver, but I'm not sure if that was cause and effect or > coincidence. > > I really wish USB sound would "just work" and that the sound > preferences would remember I prefer USB after a reboot. Linux use to > be better about that sort of thing.Well, it can't remember what it can't do properly in the first place. Have you compared lsmod output prior to plugging into USB to lsmod output when plugged in and functioning properly?