Hi, Am trying to build SMP kernel. Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option. Successfully compile the new kernel and when using that kernel to boot up, following errors were shown up(highlighted in bold & red color): My kernel config file has ACPI and PCI configs enabled. Any pointers to what caused the problem are appreciated. ****************************** ********************************************************************************* BIOS-e820: 0000000000010000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fee9000 (usable) BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 510MB LOWMEM available. Memory for crash kernel (0x0 to 0x0) notwithin permissible range disabling kdump Using x86 segment limits to approximate NX protection DMI not present or invalid. Using APIC driver default ACPI: Unable to locate RSDP Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) Detected 1000.103 MHz processor. Built 1 zonelists. Total pages: 130793 Kernel command line: root=/dev/ram ramdisk_size=200000 ramdisk_start=0x6000000 c onsole=ttyS0,9600n8 plat=bryce reboot=warm n Local APIC disabled by BIOS -- you can enable it with "lapic" Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c076f000 soft=c074f000 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour dummy device 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 503320k/523172k available (2189k kernel code, 19224k reserved, 920k data , 232k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop (skipped), value calculated using timer frequency.. 2000. 20 BogoMIPS (lpj=1000103) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 14k freed CPU0: Intel(R) Celeron(R) M processor 1.00GHz stepping 08 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs *checking if image is initramfs... it is Freeing initrd memory: 10554k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xff67f, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0500-053f claimed by ICH4 GPIO ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - Flags=8 [20060707] ACPI: System description tables not found* PCI: Transparent bridge - 0000:00:1e.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI: Bridge: 0000:00:02.0 IO window: c000-0000 MEM window: c0100000-00000000 PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try using p ci=biosirq. PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try using p ci=biosirq. NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1300527457.278:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API alg: No test for crc32c (crc32c-generic) ksign: Installing public key data Loading keyring io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport-driver 0000:00:02.0: device [8086:3595] has invalid IRQ; check vendor B IOS pcieport-driver 0000:00:03.0: device [8086:3596] has invalid IRQ; check vendor B IOS pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ************************************************************************************************************************** -- -- Krishna Mohan B -- -- Krishna Mohan B -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110323/78adf278/attachment-0001.html>
sri wrote:> Hi, > > Am trying to build SMP kernel. > Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option. > Successfully compile the new kernel and when using that kernel to boot > up, following errors were shown up(highlighted in bold & red color): > My kernel config file has ACPI and PCI configs enabled.what's wrong with the ditribution-built kernel (which has SMP AFAIK)?
At Wed, 23 Mar 2011 19:34:10 +0530 CentOS mailing list <centos at centos.org> wrote:> > > > Hi, > > Am trying to build SMP kernel.You do know that the *stock* CentOS 5.x kernels (2.6.18-...) are already built as SMP kernels? That is, under RHEL 5/CentOS 5 you don't even get uniprocessor kernels, unless you build them yourself (and there isn't much need to bother).> Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option. > Successfully compile the new kernel and when using that kernel to boot up, > following errors were shown up(highlighted in bold & red color): > My kernel config file has ACPI and PCI configs enabled. > > Any pointers to what caused the problem are appreciated. > > > ****************************** > ********************************************************************************* > BIOS-e820: 0000000000010000 - 000000000009e000 (usable) > BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fee9000 (usable) > BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 510MB LOWMEM available. > Memory for crash kernel (0x0 to 0x0) notwithin permissible range > disabling kdump > Using x86 segment limits to approximate NX protection > DMI not present or invalid. > Using APIC driver default > ACPI: Unable to locate RSDP > Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) > Detected 1000.103 MHz processor. > Built 1 zonelists. Total pages: 130793 > Kernel command line: root=/dev/ram ramdisk_size=200000 > ramdisk_start=0x6000000 c > onsole=ttyS0,9600n8 plat=bryce reboot=warm n > Local APIC disabled by BIOS -- you can enable it with "lapic" > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c076f000 soft=c074f000 > PID hash table entries: 2048 (order: 11, 8192 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 503320k/523172k available (2189k kernel code, 19224k reserved, 920k > data > , 232k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay loop (skipped), value calculated using timer frequency.. > 2000. > 20 BogoMIPS (lpj=1000103) > Security Framework v1.0.0 initialized > SELinux: Initializing. > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 512K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 14k freed > CPU0: Intel(R) Celeron(R) M processor 1.00GHz stepping 08 > SMP motherboard not detected. > Local APIC not detected. Using dummy APIC emulation. > Brought up 1 CPUs > *checking if image is initramfs... it is > Freeing initrd memory: 10554k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xff67f, last bus=4 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Probing PCI hardware > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO > PCI quirk: region 0500-053f claimed by ICH4 GPIO > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found* > PCI: Transparent bridge - 0000:00:1e.0 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > PCI: Bridge: 0000:00:02.0 > IO window: c000-0000 > MEM window: c0100000-00000000 > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try > using p > ci=biosirq. > PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try > using p > ci=biosirq. > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 8192) > TCP reno registered > apm: BIOS not found. > audit: initializing netlink socket (disabled) > type=2000 audit(1300527457.278:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > alg: No test for crc32c (crc32c-generic) > ksign: Installing public key data > Loading keyring > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport-driver 0000:00:02.0: device [8086:3595] has invalid IRQ; check > vendor B > IOS > pcieport-driver 0000:00:03.0: device [8086:3596] has invalid IRQ; check > vendor B > IOS > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > **************************************************************************************************************************-- Robert Heller -- 978-544-6933 / heller at deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments
Date: Wed, 23 Mar 2011 13:18:09 -0400 From: Robert Heller <heller at deepsoft.com> Subject: Re: [CentOS] ACPI errors during bootup To: CentOS mailing list <centos at centos.org> Cc: centos at centos.org Message-ID: <201103231718.p2NHI9oI011643 at sharky.deepsoft.com> At Wed, 23 Mar 2011 19:34:10 +0530 CentOS mailing list <centos at centos.org> wrote:> > > > Hi, > > Am trying to build SMP kernel.| You do know that the *stock* CentOS 5.x kernels (2.6.18-...) are already | built as SMP kernels? That is, under RHEL 5/CentOS 5 you don't even get | uniprocessor kernels, unless you build them yourself (and there isn't | much need to bother). OK. But what could be the cause for throwing this ACPI errors? I have enabled ACPI in kernel config and the same is working fine with kernel-2.6.18-128 version. Thanks for the Help.> Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option. > Successfully compile the new kernel and when using that kernel to boot up, > following errors were shown up(highlighted in bold & red color): > My kernel config file has ACPI and PCI configs enabled. > > Any pointers to what caused the problem are appreciated. > > > ****************************** >*********************************************************************************> BIOS-e820: 0000000000010000 - 000000000009e000 (usable) > BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001fee9000 (usable) > BIOS-e820: 000000001fee9000 - 0000000020000000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 0MB HIGHMEM available. > 510MB LOWMEM available. > Memory for crash kernel (0x0 to 0x0) notwithin permissible range > disabling kdump > Using x86 segment limits to approximate NX protection > DMI not present or invalid. > Using APIC driver default > ACPI: Unable to locate RSDP > Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000) > Detected 1000.103 MHz processor. > Built 1 zonelists. Total pages: 130793 > Kernel command line: root=/dev/ram ramdisk_size=200000 > ramdisk_start=0x6000000 c > onsole=ttyS0,9600n8 plat=bryce reboot=warm n > Local APIC disabled by BIOS -- you can enable it with "lapic" > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > CPU 0 irqstacks, hard=c076f000 soft=c074f000 > PID hash table entries: 2048 (order: 11, 8192 bytes) > Console: colour dummy device 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Memory: 503320k/523172k available (2189k kernel code, 19224k reserved,920k> data > , 232k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode...Ok.> Calibrating delay loop (skipped), value calculated using timer frequency.. > 2000. > 20 BogoMIPS (lpj=1000103) > Security Framework v1.0.0 initialized > SELinux: Initializing. > selinux_register_security: Registering secondary module capability > Capability LSM initialized as secondary > Mount-cache hash table entries: 512 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 512K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > Checking 'hlt' instruction... OK. > SMP alternatives: switching to UP code > Freeing SMP alternatives: 14k freed > CPU0: Intel(R) Celeron(R) M processor 1.00GHz stepping 08 > SMP motherboard not detected. > Local APIC not detected. Using dummy APIC emulation. > Brought up 1 CPUs > *checking if image is initramfs... it is > Freeing initrd memory: 10554k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xff67f, last bus=4 > PCI: Using configuration type 1 > Setting up standard PCI resources > ACPI: Interpreter disabled. > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI: disabled > usbcore: registered new driver usbfs > usbcore: registered new driver hub > PCI: Probing PCI hardware > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO > PCI quirk: region 0500-053f claimed by ICH4 GPIO > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found > ACPI Error (tbxfroot-0645): No valid RSDP was found [20060707] > ACPI Exception (tbxfroot-0400): AE_NOT_FOUND, RSDP structure not found - > Flags=8 > [20060707] > ACPI: System description tables not found* > PCI: Transparent bridge - 0000:00:1e.0 > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > PCI: Bridge: 0000:00:02.0 > IO window: c000-0000 > MEM window: c0100000-00000000 > PREFETCH window: disabled. > PCI: Bridge: 0000:00:03.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1e.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please try > using p > ci=biosirq. > PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please try > using p > ci=biosirq. > NET: Registered protocol family 2 > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 8192 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 8192) > TCP reno registered > apm: BIOS not found. > audit: initializing netlink socket (disabled) > type=2000 audit(1300527457.278:1): initialized > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > alg: No test for crc32c (crc32c-generic) > ksign: Installing public key data > Loading keyring > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pcieport-driver 0000:00:02.0: device [8086:3595] has invalid IRQ; check > vendor B > IOS > pcieport-driver 0000:00:03.0: device [8086:3596] has invalid IRQ; check > vendor B > IOS > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 >************************************************************************************************************************** -- Robert Heller -- 978-544-6933 / heller at deepsoft.com Deepwoods Software -- http://www.deepsoft.com/ () ascii ribbon campaign -- against html e-mail /\ www.asciiribbon.org -- against proprietary attachments -- -- Krishna Mohan B -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20110325/fea8523e/attachment-0001.html>
centos-bounces at centos.org wrote:> But what could be the cause for throwing this ACPI errors?I've had acpi errors like the ones you list, that went away when I installed SL6.0 Before then I had to boot acpi=off. Your board is not SMP and does not support ACPI.>> following errors were shown up(highlighted in bold & red color)Since my mail reader translated HTML to plain text, I see nothing in bold nor in red. Generally, people on mailing lists prefer plain text to HTML mail.>> Using APIC driver default >> ACPI: Unable to locate RSDPPut 'acpi=off' in the boot line since your hardware has no ACPI.>> 20000000:dff00000) Detected 1000.103 MHz Celeron processor. >> switching to UP codeYou don't need an SMP kernel, you have 1 CPU with 1 core only.>> PCI: No IRQ known for interrupt pin A of device 0000:00:02.0. Please >> try using pci=biosirq. >> PCI: No IRQ known for interrupt pin A of device 0000:00:03.0. Please >> try using pci=biosirq.There's a suggestion I'd follow: boot line should have acpi=off pci=biosirq Since you're building your own kernel, you can switch off SMP and ACPI. Likely APIC and IO_APIC also. Since you have only 1/2GB RAM, I'd switch off things I wasn't going to use. -- Insert spiffy .sig here: Life is complex: it has both real and imaginary parts. //me ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.Hubbell.com - Hubbell Incorporated**