I pulled down the 2.6.18-92.1.10 source, installed it, built the
package, copied the straight x86_64 config file from SOURCES into the
build directory, redid make menuconfig to enable NTFS support, added the
# x86_64 back into the .config file, copied .config back to the SOURCES
directory and ran rpmbuild -ba --target=x86_64 <spec file> (same as I
always do with new kernels), but this time I'm getting this error in the
build:
Patch #99990 (linux-2.6-rhel-version-h.patch):
+ patch -p1 -s
+ perl -p -i -e 's/^SUBLEVEL.*/SUBLEVEL = 18/' Makefile
+ perl -p -i -e 's/^EXTRAVERSION.*/EXTRAVERSION = -prep/' Makefile
+ perl -p -i -e 's/^RHEL_MAJOR.*/RHEL_MAJOR = 5/' Makefile
+ perl -p -i -e 's/^RHEL_MINOR.*/RHEL_MINOR = 2/' Makefile
+ cp /home/rpmbuild/SOURCES/COPYING.modules Documentation/
+ mkdir configs
+ for cfg in 'kernel-2.6.18-x86_64*.config'
+ cp
-f /home/rpmbuild/SOURCES/kernel-2.6.18-x86_64-debug.config
/home/rpmbuild/SOURCES/kernel-2.6.18-x86_64-xen.config
/home/rpmbuild/SOURCES/kernel-2.6.18-x86_64.config .
+ for i in 'kernel-2.6.18-x86_64*.config'
+ mv kernel-2.6.18-x86_64-debug.config
kernel-2.6.18-x86_64-debug.config.tmp
+ /home/rpmbuild/SOURCES/merge.pl /home/rpmbuild/SOURCES/config-rhel-generic
kernel-2.6.18-x86_64-debug.config.tmp
+ rm kernel-2.6.18-x86_64-debug.config.tmp
+ for i in 'kernel-2.6.18-x86_64*.config'
+ mv kernel-2.6.18-x86_64-xen.config kernel-2.6.18-x86_64-xen.config.tmp
+ /home/rpmbuild/SOURCES/merge.pl /home/rpmbuild/SOURCES/config-rhel-generic
kernel-2.6.18-x86_64-xen.config.tmp
+ rm kernel-2.6.18-x86_64-xen.config.tmp
+ for i in 'kernel-2.6.18-x86_64*.config'
+ mv kernel-2.6.18-x86_64.config kernel-2.6.18-x86_64.config.tmp
+ /home/rpmbuild/SOURCES/merge.pl /home/rpmbuild/SOURCES/config-rhel-generic
kernel-2.6.18-x86_64.config.tmp
+ rm kernel-2.6.18-x86_64.config.tmp
+ rm -f kernel-2.6.18-i686-kdump.config
kernel-2.6.18-x86_64-kdump.config
+ rm -f kernel-2.6.18-i586.config
+ rm -f kernel-2.6.18-x86_64-debug.config
+ for i in '*.config'
+ mv kernel-2.6.18-x86_64-xen.config .config
++ head -1 .config
++ cut -b 3-
+ Arch=x86_64
+ make ARCH=x86_64 nonint_oldconfig
+ echo '# x86_64'
+ cat .config
+ for i in '*.config'
+ mv kernel-2.6.18-x86_64.config .config
++ head -1 .config
++ cut -b 3-
+ Arch=x86_64
+ make ARCH=x86_64 nonint_oldconfig
CONFIG_MAX_RAW_DEVS
make[1]: *** [nonint_oldconfig] Error 1
make: *** [nonint_oldconfig] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.53835 (%prep)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.53835 (%prep)
Was there something I needed to tweak in the spec file, other than the
build id and a few of the build switches I usually turn off (xen, debug,
kdump)?
Thanks.
mhr
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.centos.org/pipermail/centos/attachments/20080806/8ccb3427/attachment.html>
On Wed, Aug 6, 2008 at 11:23 PM, Mark Hull-Richter <mhullrich at gmail.com> wrote:> I pulled down the 2.6.18-92.1.10 source, installed it, built the package, > copied the straight x86_64 config file from SOURCES into the build > directory, redid make menuconfig to enable NTFS support, added the # x86_64 > back into the .config file, copied .config back to the SOURCES directory and > ran rpmbuild -ba --target=x86_64 <spec file> (same as I always do with new > kernels), but this time I'm getting this error in the build: > > Patch #99990 (linux-2.6-rhel-version-h.patch): > + patch -p1 -s > + perl -p -i -e 's/^SUBLEVEL.*/SUBLEVEL = 18/' Makefile(snip)> + cat .config > + for i in '*.config' > + mv kernel-2.6.18-x86_64.config .config > ++ head -1 .config > ++ cut -b 3- > + Arch=x86_64 > + make ARCH=x86_64 nonint_oldconfig > CONFIG_MAX_RAW_DEVS > make[1]: *** [nonint_oldconfig] Error 1 > make: *** [nonint_oldconfig] Error 2 > error: Bad exit status from /var/tmp/rpm-tmp.53835 (%prep) > > RPM build errors: > Bad exit status from /var/tmp/rpm-tmp.53835 (%prep) > > Was there something I needed to tweak in the spec file, other than the build > id and a few of the build switches I usually turn off (xen, debug, kdump)?I suggest you take a look at the Wiki article: http://wiki.centos.org/HowTos/Custom_Kernel It has been updated recently (Alan did most of the work) to accommodate recent changes in the spec file. You will find many lines that were changed or added newly. Among other things, it now suggests that you copy the .config file from the config/ directory (or from your /boot) instead of the SOURCES directory. Because your build is failing at the step of: make ARCH=$Arch nonint_oldconfig > /dev/null I suspect using the config file from configs/ might fix the error you got. Akemi