search for: sata_nv

...same setup was 100% reliable. I also have two 160gig Maxtor ATA133 drive in the machine on the on board PATA controller and they work totally reliable. I'm wondering if anyone else is having a problem with on board nvidia sata controller thats part of the nforce4 chipset? btw its using the sata_nv driver. Also when I reboot it works fine for a few hours and then begins to act up again. Its not a heat problem, the drives have a working fan directly blowing on the drives, and the case its in has very good airflow. ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD000 irq 193 ata2: SAT...

Good day. Thanks in advance for any help. I have a Tyan S2895 (Thunder K8WE) with 2 275 Opterons and the latest (1.02) bios. It appears to have an nVidia nForce SATA chipset which connects to a 250gb WD Caviar SATA drive. Using the CentOS 4 update 2 x86_64 DVD, the install is peachy until half-way through the "performing post install configuration" bit. Then it hangs forever. I

...q 50, io mem 0xfe9bec00 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected md: raid1 personality registered for level 1 SCSI subsystem initialized libata version 2.00 loaded. sata_nv 0000:00:05.0: version 2.0 ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21 GSI 18 sharing vector 0x3A and IRQ 18 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 58 PCI: Setting latency timer of device 0000:00:05.0 to 64 ata1: SATA max UDMA/133 cmd 0xC480 c...

..."Internal Super Multi DVD Rewriter" with a SATA interface - this shows up as /dev/scd0. When I insert a pre-recorded DVD autorun mounts it and displays the contents without any hassles. It appears to me that the required kernel modules are loaded - as copied below from lsmod output. sata_nv 18629 0 libata 111261 1 sata_nv sd_mod 17217 0 scsi_mod 125261 3 sr_mod,libata,sd_mod I am using Verbatim DVD-RDL blanks. When I try to write a pre-recorded iso to the DVD I get the following error message: [user at test]$ growisofs...

Hello list 6 centos I wish you a very good year for this festive period I am writing to report a problem I encounter with my wireless card realtek 8150 the installer does not detect the device so the /etc/sysconfig/network-script/ifcfg-wlan0 is absent I can not find the driver for the deposit elrepo No I have in any case managed to detect my peripheique by the system Despite my many attempts

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, Is the sata_nv (based on SCSI) driver supposed to work with Xen? When I tried to boot my dom0 kernel recompiled with the sata_nv drivers enabled my kernel locks up, I guess when probing the first drive connected via S-ATA. ("Screenshot" here: <URL:http://mjh.name/xen.lock.1.jpg>) (Kernel also sa...

...enLinux configuration, a modified version of my native kernel configuration (with Xen options turned on), and a configuration set with ''make allmodconfig''. I have tried ramdisks created using just mkinitrd with no options, and also using `--with=scsi_mod --with=sd_mod --with=sata_nv` as well as the same thing except using `--preload=..` The one thing that seems suspicious in the XenLinux configuration is that the SCSI/SATA symbols have different names than the symbols in my native CentOS kernel that does boot (2.6.18-92). When I try to copy the native config, I get several...

I have a brand new ASUS MB model M2N-MX which is giving me issues when installing Centos 4.4 64 bit I initially had problems with finding the SATA drives but I resolved that issue by simply selecting the NVIDIA SATA (sata_nv)driver from the list of drivers during the initial install. The install seemed to go fine after that as the installer uses the Generic VESA video driver during the install, however, upon the restart after the install, the server then completely locks up. I can only assume it is at the point of load...

Hi, I am installing Centos ServerCD 4.4 64-bit on a new Supermicro board, the RAID BIOS looks fine, RAID 5, all 4 Seagate ES 250 GB drives show up as a single array in the RAID BIOS tool, and the OS install phase completes without a hitch. One thing I noticed was that the OS was loading the sata_nv driver and picking up the 4 Sata drives instead of the large RAID5 volume, it should just appear as one big 1TB drive. Usually it should see the RAID and not worry about loading the sata driver per se from what I remember... When the OS install completes and I reboot, I simply get a blinking c...

...(U) netconsole netdump ppdev nfs nfsd exportfs lockd nfs_acl md5 ipv6 parport_pc lp parport autofs4 w83627hf i2c_sensor i2c_isa i2c_dev i2c_core sunrpc ipt_REJECT ipt_state ip_conntrack iptable_filter ip_tables dm_mirror dm_mod button battery ac ohci_hcd ehci_hcd tg3 floppy ext3 jbd raid1 raid0 sata_nv libata sd_mod scsi_mod Pid: 16269, comm: java Tainted: PF 2.6.9-42.ELlargesmp RIP: 0010:[<ffffffff8030a9aa>] <ffffffff8030a9aa>{.text.lock.spinlock+46} RSP: 0000:000001032d1a1e08 EFLAGS: 00000086 RAX: 000001032c2e5030 RBX: 00000107fc53dac8 RCX: 0000000000000000 RDX: 000001032d1a1f...

...o deactivate itself. :) A hard reset and reseat of the drive in the SATA enclosure brings it back again. First thought was that the slot or SATA port was bad, so we have moved to others with the same result. Solaris 10 x86 installs perfectly on this machine, so I'm starting to think that the sata_nv driver is to blame here. We're in the process of trying 32-bit CentOS 5.1 on the system just for giggles, and may try Fedora 8 as well or RHEL 5.1 and use our paid support to track this issue down, but thought I'd run it by everyone here. Didn't see any existing issues in bugzilla.red...

...) I thought it might be a permission problem, but the device (/dev/scd0) is showing up as being "owned" by me, courtesy of Gnome no doubt. I get the bad burns whether I run as root or a regular user. At this point I don't know whether to think the problem is with cdrecord or the sata_nv driver. Anybody got any ideas on where to look next? Thanks! -- Jay Leafey - Memphis, TN jay.leafey at mindless.com -------------- next part -------------- A non-text attachment was scrubbed... Name: smime.p7s Type: application/x-pkcs7-signature Size: 4011 bytes Desc: S/MIME Cryptographic Signatu...

...a key", but nothing happens...then I change the BIOS IDE setting back to SATA, and it boots but it gives me a kernel panic saying "could not mount such file system, not such file or directory", it doesn't load up the drivers at the linux noprobe way, nor even the forcedeth or the sata_nv. I read in ubuntu and fedora forums that they're supported in Ubuntu 7.04, 7.10, 8.04 and Fedora 7, 8, 9, haven't test them yet though, I want to stick with Centos bcos thats my working enviroment. What can I do? Here are my specs: Asus msn-vm hdmi Chipset Nvidia GeForce7050PV/nForce630a...

...266879] ACPI: Thermal Zone [THRM] (40 C) [ 0.266982] isapnp: Scanning for PnP cards... [ 0.619477] isapnp: No Plug & Play device found [ 0.620585] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.621769] brd: module loaded [ 0.622218] loop: module loaded [ 0.622495] sata_nv 0000:00:07.0: version 3.5 [ 0.622884] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 [ 0.622933] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23 [ 0.623034] sata_nv 0000:00:07.0: setting latency timer to 64 [ 0.623131] scsi0 : sata_nv [ 0.62...

...the add-in cards are clearly on different busses. CPU0 0: 3266196236 IO-APIC-edge timer 1: 2 IO-APIC-edge i8042 8: 3 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 169: 207230361 IO-APIC-level ohci_hcd:usb1 177: 5080313 IO-APIC-level sata_nv 185: 0 IO-APIC-level sata_nv 193: 1632824 IO-APIC-level eth1 201: 39823124 IO-APIC-level eth2 225: 2565938694 PCI-MSI eth0 NMI: 0 LOC: 3266207768 ERR: 1 MIS: 0 So the fact that I couldn't link up when I was on one card and I could when...

...rt bridge for firewalling (i'll try some brouting like stuff too, but it's not there yet) Panic output: Unable to handle kernel NULL pointer dereference at virtual address 0000000c printing eip: c0359b67 *pde = 00000000 Oops: 0000 [#1] Modules linked in: ebt_ip ebtable_filter ebtbles rtc sata_nv nvsound sata_sil nvnet eepro100 3c59x r8169 CPU: 0 EIP: 0060:[<c0359b67>] Tainted: P VLI EFLAGS: 00010282 (2.6.15) EIP i at br_nf_pre_routing_finish+0x1a/0x2c0 eax: 00000000 ebx: 00000000 ecx: c0475e9c edx: dfb2c5a0 esi: cv760820 edi: 80000000 ebp: deefe000 esp: c0...

...1.378424] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.379022] scsi0 : pata_amd [ 1.379140] scsi1 : pata_amd [ 1.379658] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.379661] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.379771] sata_nv 0000:00:08.0: version 3.5 [ 1.380118] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20 [ 1.380138] sata_nv 0000:00:08.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20 [ 1.380144] firewire_core: created device fw0: GUID 001a4d0000ea3f50, S400 [ 1.380209] sata_nv 0000...

David, So here are the two patches. Remove all patches that you have and apply these. The first one is straight forward. The second one will hopefully fix the livelock issue you have been encountering. People reviewing the patches should note that the second one is slightly different than the one I posted earlier. It removes the BUG_ON in the if condition where we jump to update_holders. The

...2922 0 150 648815 506811268 IO-APIC-fasteoi wcte12xp0 19: 0 0 0 153 0 7 4563 285489 IO-APIC-fasteoi arcmsr 20: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi sata_nv 21: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi sata_nv 22: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi ohci_hcd:usb2 23: 0 0 0 0 0...

Hello, I originally posted this to xen-users, but someone suggested I post it here. I am having ACPI problems on a PenguinComputing Altus1600 system. It has 2x dual core Opteron 2210 processors. The system boots with a standard Debian or Ubuntu SMP kernel, with ACPI enabled. However the xen live cd, binary xen install, as well as my own custom compile of xen 3.0.4 from source will not boot.