thr3ads.net - asterisk users - [asterisk-users] Update peer IP address [Apr 2015]

If this information is useful, please help other people find it:
Share via:

Tech Support

2015-Apr-01 14:40 UTC

[asterisk-users] Update peer IP address

If I correctly understand what the problem is, what I did was write a script
that runs out of CRON every 15 minutes. It checks the outside IP address by
querying http://checkip.dyndns.org and compares it to the IP address stored in
the parameter ?externip? in the [general] section of sip.conf. If the two values
are the same, the script exits quietly. If they are different, the script
updates ?externip? with the new address, does a sip reload, and shoots me an
email saying there was an update. It's a fairly simple and straightforward
process and does the job. I use this script for all PBX?s that are behind a NAT.
I hope this helps.

Regards;

John

 

From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces
at lists.digium.com] On Behalf Of Daniel Heckl
Sent: Wednesday, April 01, 2015 2:56 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Update peer IP address

 

 

Scott, thank you four your reply.

 

I had already though about both options, but the problem is, that after an ip
change AND a new registration the ip address of the peer is not updated
automatically. INVITES are answered with 401.

 

Only after a sip reload the peer works again.

 

That can't be normal...

 

Daniel


Am 31.03.2015 um 22:45 schrieb Scott Griepentrog <sgriepentrog at
digium.com>:

You have two options for dealing with an IP change during the registration
period:

 

1) set the registration time to shorter period of time to minimize the downtime

 

2) detect that the IP address has changed via whatever method available, and
then issue a "sip reload" CLI command to asterisk, which will cause it
to resend registrations immediately.

 

On Tue, Mar 31, 2015 at 1:36 PM, Daniel Heckl <daniel.heckl at gmail.com>
wrote:

Maybe someone could elaborate on my first question again.





If the ip address changes while a REGISTER period, the ip address of the peer
isn't been updated. How can asterisk update the ip address of the peer?


Am 31.03.2015 um 12:36 schrieb Daniel Heckl <daniel.heckl at gmail.com>:

Hello Sebastian,

 

I had already seen this list of the hosts, but it is not active. All servers
with which my Asterisk has been communicated are not listed.

 

A port scan, to eventually update the list, found hundreds of servers provided
in the address range 217.0.0.0/13 with open port 5060, some were even not found.
I think there must be another solution.

 

If I change insecure to insecure=port,invite - could that be a solution?

 

Or should I try to change to res_pjsip (upgrade to Asterisk 13 is no problem)?
Has there anyone experience with dynamic ip addresses of Asterisk?

 

Daniel

 

Am 30.03.2015 um 20:09 schrieb Sebastian Kemper <sebastian_ml at gmx.net>:

 

On Mon, Mar 30, 2015 at 06:31:46PM +0200, Daniel Heckl wrote:



Hello

I use Asterisk 11 with FreePBX 12. Our SIP Provider is Telekom
Germany. We have sometimes problems with incoming and outgoing calls.
I hope I can explain it understandable.


Hello Daniel,

I'll find myself in the same situation a few weeks from now :-)





For example, Asterisk sends a REGISTER to 217.0.23.68 (tel.t-online.de
<http://tel.t-online.de/>), the message is answered with OK and the
peer is registered.

Usually INVITES comes now from this ip address. All works fine. But
sometimes INVITES comes from an other IP address, for example
217.0.23.100. This request Asterisk responds with 401 Unauthorized.

In the next register procedure REGISTER are sent to the new ip address
and answered also with OK. But qualify OPTIONS are continue be sent to
the old ip address. Incoming and outgoing calls are canceled. Outgoing
calls are answered with Forbidden.

Even if the REGISTER procedure works with the new ip address, the
peers are connected with the old address.

Waiting doesn?t help, only a ?sip reload? update the ip address of the
peer. 

What is the solution for this problem? How can asterisk update the
peer?


I think the solution - for the inbound issue at least - could be to add
more hosts as a peer. Have a looks at this forum post:

http://www.ip-phone-forum.de/showthread.php?t=268787
<http://www.ip-phone-forum.de/showthread.php?t=268787&p=1999371&viewfull=1#post1999371>
&p=1999371&viewfull=1#post1999371

The user used a template and than he added peers, each with its own IP
address. The provided list was last updated in 2014, though, so I assume
the provider in the meantime has added to that list.

It looks pretty tedious, though, I mean there could be dozens of IPs
you'd have to add. But I guess this is the way to go with Asterisk 11
and chan_sip.

The future looks brighter :-) I read that with pjsip, which I understand
is the replacement for chan_sip, you can have one peer entry and match
an IP range instead of a single host. That should tidy up the dialplan.

What I'm a little afraid of is the SIP provider using IPs out of a range
that they also use for other services. Maybe out of the same range they
hand out IPs to their customers. I guess we got to be careful :-)

Kind regards,
Sebastian




The Asterisk is local behind a NAT with a firewall, following settings
are used:

externhost with DynDNS stun with stun.t-online.de
<http://stun.t-online.de/> nat=yes srvlookup=yes allowguest=no
trustrpid=no insecure=invite qualify=yes

Thank you!  Daniel





-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users



-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

 


--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users





 

-- 

Image removed by sender. Digium logo

Scott Griepentrog
Digium, Inc ? Software Developer
445 Jan Davis Drive NW ? Huntsville, AL 35806 ? US
direct/fax: +1 256 428 6239 ? mobile: +1 256 580 6090
Check us out at: http://digium.com ? http://asterisk.org

-- 
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
New to Asterisk? Join us for a live introductory webinar every Thurs:
              http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
  http://lists.digium.com/mailman/listinfo/asterisk-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/53c00765/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 521 bytes
Desc: not available
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/53c00765/attachment-0001.jpg>

Daniel Heckl

2015-Apr-01 14:48 UTC

head link

[asterisk-users] Update peer IP address

John,

thank you four your answer. I think you have misunderstood the problem. It?s
about a ip address change of the sip trunk, not of my asterisk server.

Kind regards,
Daniel
> Am 01.04.2015 um 16:40 schrieb Tech Support <asterisk at voipbusiness.us
<mailto:asterisk at voipbusiness.us>>:
> 
>     If I correctly understand what the problem is, what I did was write a
script that runs out of CRON every 15 minutes. It checks the outside IP address
by querying http://checkip.dyndns.org <http://checkip.dyndns.org/> and
compares it to the IP address stored in the parameter ?externip? in the
[general] section of sip.conf. If the two values are the same, the script exits
quietly. If they are different, the script updates ?externip? with the new
address, does a sip reload, and shoots me an email saying there was an update.
It's a fairly simple and straightforward process and does the job. I use
this script for all PBX?s that are behind a NAT. I hope this helps.
> Regards;
> John
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/807d4110/attachment.html>

Andres

2015-Apr-01 15:00 UTC

head link

[asterisk-users] Update peer IP address

On 4/1/15 10:48 AM, Daniel Heckl wrote:> John,
>
> thank you four your answer. I think you have misunderstood the 
> problem. It?s about a ip address change of the sip trunk, not of my 
> asterisk server.You would probably benefit by enabling the DNS Manager to allow for 
dynamic IP changes:

# cat dnsmgr.conf
[general]
enable=yes             ; enable creation of managed DNS lookups
                         ;   default is 'no'
refreshinterval=180   ; refresh managed DNS lookups every <n> seconds
                         ;   default is 300 (5 minutes)

>
> Kind regards,
> Daniel
>
>> Am 01.04.2015 um 16:40 schrieb Tech Support <asterisk at
voipbusiness.us
>> <mailto:asterisk at voipbusiness.us>>:
>>
>>     If I correctly understand what the problem is, what I did was 
>> write a script that runs out of CRON every 15 minutes. It checks the 
>> outside IP address by queryinghttp://checkip.dyndns.organd compares 
>> it to the IP address stored in the parameter ?externip? in the 
>> [general] section of sip.conf. If the two values are the same, the 
>> script exits quietly. If they are different, the script updates 
>> ?externip? with the new address, does a sip reload, and shoots me an 
>> email saying there was an update. It's a fairly simple and 
>> straightforward process and does the job. I use this script for all 
>> PBX?s that are behind a NAT. I hope this helps.
>> Regards;
>> John
>
>
>

-- 
Technical Support
http://www.cellroute.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20150401/91a58518/attachment.html>

Apparently Analagous Threads

Search for more maybe matching threads

asterisk users - Apr 2015 - Update peer IP address

[asterisk-users] Update peer IP address

[asterisk-users] Update peer IP address

[asterisk-users] Update peer IP address

Apparently Analagous Threads