search for: dnsmgr

I just jumped to asterisk-1.6.1.8 and I calls will not go through to my asterisk. Same setup with asterisk-1.4 and calls get accepted. sip show registry (asterisk-1.6): Host dnsmgr Username Refresh State sip.actio.pl:5060 N 4589835 105 Registered sip show registry (asterisk-1.4): Host Username Refresh State sip.actio.pl:5060 4589835 105 Registered The only difference I see is that asterisk-1.6 has dnsmgr ? and I get a l...

[Jul 2 09:31:16] VERBOSE[2682] logger.c: == Refreshing DNS lookups. [Jul 2 09:31:16] NOTICE[2682] dnsmgr.c: host 'outbound1.vitelity.net' changed from 64.2.142.17 to 64.2.142.29 [Jul 2 09:31:23] DEBUG[2711] jitterbuf.c: Attempting to exceed Jitterbuf max 600 timeslots And the calls are dropped. I fixed this by turning off enable in dnsmgr.conf My question is: Do you attempt to move existi...

Ok, I have tested dnsmgr. This is not a solution, the situation has not changed. With dnsmgr I can not place outbound calls. I do not know why and what dnsmgr really do. My current solution is as follows: Say allowguest=yes, configure the default context that there can not be placed outbound calls. Use iptables to DROP...

Hello, What's dnsmgr ? Anybody could tell mr more? cat /etc/asterisk/dnsmgr.conf [general] ;enable=yes ; enable creation of managed DNS lookups ; default is 'no' ;refreshinterval=1200 ; refresh managed DNS lookups every <n> seconds ; defau...

Hi, I turned on dnsmgr in 1.2 and it worked for a few weeks. Suddenly, no iax2 providers were working. All of them were unreachable. My own fixed ip phones were. I disabled the dnsmgr and now the IAX providers are working again. No big deal, but it's odd that this happened this way. Anyone else had problems with it?

Hi list! Yesterday Deutsche Telekom had a really big problem and Asterisk couldn't connect to the remote Server (by Telekom) until today about 7:30. Well, it could happen... What I find really annoying was that I needed to restart Asterisk as I checked with sipsak that the Telekom-Server works... I think, this should not be normal... Can someone explain me why it happens and what I have to

...M, Daniel Heckl wrote: > John, > > thank you four your answer. I think you have misunderstood the > problem. It?s about a ip address change of the sip trunk, not of my > asterisk server. You would probably benefit by enabling the DNS Manager to allow for dynamic IP changes: # cat dnsmgr.conf [general] enable=yes ; enable creation of managed DNS lookups ; default is 'no' refreshinterval=180 ; refresh managed DNS lookups every <n> seconds ; default is 300 (5 minutes) > > Kind regards, > Dani...

...le SIP softphone extension with SIP origination and termination. The main purpose of using * is for voicemail and future expansion ability. I know I need sip.conf extensions.conf voicemail.conf but what else? do I need: asterisk.conf codecs.conf rtp.conf indications.conf say.conf modules.conf dnsmgr.conf logger.conf dnsmgr.conf if so which of these as well? Thanks, Eric

...gt; ?I'd be curious if setting > > insecure=invite,port > > makes any difference either (without alllowguest on). > ? > > On Thu, Apr 2, 2015 at 9:03 AM, Daniel Heckl <daniel.heckl at gmail.com <mailto:daniel.heckl at gmail.com>> wrote: > Ok, I have tested dnsmgr. This is not a solution, the situation has not changed. With dnsmgr I can not place outbound calls. I do not know why and what dnsmgr really do. > > My current solution is as follows: > > Say allowguest=yes, configure the default context that there can not be placed outbound calls. Us...

Hi there The "dnsmgr" in Aterisk 1.4.0 seems not to work. I enabled "DNS lookups" in dnsmgr.conf but after reloading the conf files * never refreshes DNS lookups. Any ideas how to debug this issue? Thanks in advance Housi Mueller --------------------------------- Don't pick lemons. Se...

?I'd be curious if setting insecure=invite,port makes any difference either (without alllowguest on). ? On Thu, Apr 2, 2015 at 9:03 AM, Daniel Heckl <daniel.heckl at gmail.com> wrote: > Ok, I have tested dnsmgr. This is not a solution, the situation has not > changed. With dnsmgr I can not place outbound calls. I do not know why and > what dnsmgr really do. > > My current solution is as follows: > > Say allowguest=yes, configure the default context that there can not be > placed outbo...

...the vendor's Asterisk version 1.8.13.1 and ServerB is normal CentOS 7 box with Asterisk 13.1. Calling from ServerB to ServerA works, but not vice versa. The only odd thing that appears to me is the different perceived port on ServerA. ServerA*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 80.152.xxx.xxx:4569 N ServerA 79.233.yyy.yyy:45697 60 Registered ServerB*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 79.233.yyy.yyy:4569 N ServerB 79.233.yyy.yyy:4569...

I just set up a WRT54GS and now I can't dial out or in. sip show registry shows: CODE: SELECT ALL Host dnsmgr Username Refresh State Reg.Time draytel.org:5060 N xxxxx 120 Request Sent I seemed to recall that running in cli always showed a response back, but there's nothing now. Using 1.8.9.2. I have my number at draytel set up to dial m...

I have a trunk, and its host=dynamic dns. The problem is, when the IP changes the Sip show peers Still show the old IP of the DNS, I have to reload and save the configuration again so that asterisk recognize the new IP of the DNS. Any idea how to automate such a thing? Or how can I keep asterisk to deal with NAMES as NAMES, and IPs as IPs. Let me know. Thanks. -------------- next

...2:54 VERBOSE[419] logger.c: -- SIP/4002-082aef20 is ringing ---MESSAGE FROM SAFE_ASTERISK--- Automatically restarting Asterisk. Sep 18 13:43:03 VERBOSE[551] logger.c: Asterisk Event Logger Started /var/log/asterisk/event_log Sep 18 13:43:03 VERBOSE[551] logger.c: == Parsing '/etc/asterisk/dnsmgr.conf': Sep 18 13:43:03 VERBOSE[551] logger.c: == Parsing '/etc/asterisk/dnsmgr.conf' : Found Sep 18 13:43:03 VERBOSE[551] logger.c: Asterisk Dynamic Loader loading preload modules: Sep 18 13:43:03 VERBOSE[551] logger.c: == Parsing '/etc/asterisk/modules.conf' safe_asterisk...

...-D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DZAPTEL_OPTIMIZATIONS -fomit-frame-pointer acl.c aescrypt.c aeskey.c aestab.c alaw.c app.c asterisk.c ast_expr2.c ast_expr2f.c astmm.c autoservice.c callerid.c cdr.c channel.c chanvars.c cli.c config.c config_old.c db.c devicestate.c dlfcn.c dns.c dnsmgr.c dsp.c enum.c file.c frame.c fskmodem.c image.c indications.c io.c jitterbuf.c loader.c logger.c manager.c md5.c muted.c netsock.c pbx.c plc.c poll.c privacy.c rtp.c say.c sched.c slinfactory.c srv.c strcompat.c tdd.c term.c translate.c ulaw.c utils.c build_tools/make_version_h > include/as...

...her record is weighted better. And if that one is not answering... So: > Better disable SRV lookups if you are not sure if your SIP channel driver > supports it ;-) Could you say me how can I disable the SRV lookups? I use Asterisk 1.8.30.0 on an OpenWRT device. > You should also use the dnsmgr of Asterisk, resp. configuring it to > reasonable values. In dnsmgr.conf I set: The version of Asterisk on my OpenWRT unfortunately does not support dnsmgr... Thanks Luca Bertoncello (lucabert at lucabert.de) -------------- next part -------------- A non-text attachment was scrubbed... Name: n...

Hello list, my CLI is spammed with : [Sep 13 08:31:38] > doing dnsmgr_lookup for 'ssw6.itsp.tld' [Sep 13 08:31:38] > doing dnsmgr_lookup for 'ssw6.itsp.tld' [Sep 13 08:31:47] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep 13 08:31:48] > doing dnsmgr_lookup for 'ssw4.itsp.tld' [Sep 13 08:31:49] > doing dnsmgr_lookup for '...

...have seen all kinds of strange behavior when Asterisk is used on a system with "iffy" DNS servers: - no failover to other DNS servers in /etc/resolv.conf (might be a C library thing) - chan_sip will sometimes mark even local SIP peers as unreachable during/after any DNS problems - why? - dnsmgr doesn't support SIP (yikes!): http://bugs.digium.com/view.php?id=9153 - other randomness (please contribute your own experiences) What can we do about improving this situation? At the very least we need to extend DNS manager support to SIP. I'm willing to pay for this and any other Ast...

...ying '/var/lib/asterisk/sounds/vprompts/109001/prompt5040.slin' ( language 'nl') [Jan 5 17:14:17] VERBOSE[29384] pbx.c: [Jan 5 17:14:17] -- Executing [s at sub-routing:52] WaitExten("SIP/test6-00000714", "15") in new stack [Jan 5 17:14:18] VERBOSE[4582] dnsmgr.c: [Jan 5 17:14:18] > doing dnsmgr_lookup for 'ssw4.brussels.weepee.org' [Jan 5 17:14:18] VERBOSE[4582] dnsmgr.c: [Jan 5 17:14:18] > doing dnsmgr_lookup for 'ssw4.brussels.weepee.org' *[Jan 5 17:14:21] DTMF[29384] channel.c: DTMF begin '2' received on SIP/test6-...