hi,
if you use realtime peers, and you want to see their states, you have to
look in the database...
if you want to see their states via cli, you have to set
rtcachefriends=yes in your sip.conf...
there are other settings that you might be interested in... :
rtcachefriends=yes ; Cache realtime friends by adding them to the
internal list
; just like friends added from the
config file only on a
; as-needed basis? (yes|no)
rtsavesysname=yes ; Save systemname in realtime database at
registration
; Default= no
rtupdate=yes ; Send registry updates to database using
realtime? (yes|no)
; If set to yes, when a SIP UA
registers successfully, the ip address,
; the origination port, the
registration period, and the username of
; the UA will be set to database via
realtime.
; If not present, defaults to 'yes'.
Note: realtime peers will
; probably not function across reloads
in the way that you expect, if
; you turn this option off.
rtautoclear=yes ; Auto-Expire friends created on the fly
on the same schedule
; as if it had just registered?
(yes|no|<seconds>)
; If set to yes, when the registration
expires, the friend will
; vanish from the configuration until
requested again. If set
; to an integer, friends expire within
this number of seconds
; instead of the registration interval.
ignoreregexpire=yes ; Enabling this setting has two functions:
;
; For non-realtime peers, when their
registration expires, the
; information will _not_ be removed
from memory or the Asterisk database
; if you attempt to place a call to the
peer, the existing information
; will be used in spite of it having
expired
;
; For realtime peers, when the peer is
retrieved from realtime storage,
; the registration information will be
used regardless of whether
; it has expired or not; if it expires
while the realtime peer
; is still in memory (due to caching or
other reasons), the
; information will not be removed from
realtime storage
regards,
yves
Am 17.02.2013 12:51, schrieb termo termosel:> Hi,
>
> I had configured Asterisk to use default database located in
> /var/lib/asterisk/sqlite3dir/sqlite3.db. When I put odbc show in
> Asterisk's cli, It returns me that I have conected but when I put
"sip
> show peers",Asterisk doesn't found any peer or user.
>
> ubuntu*CLI> odbc show
>
> ODBC DSN Settings
> -----------------
>
> Name: asterisk
> DSN: asterisk-connector
> Last connection attempt: 1970-01-01 01:00:00
> Pooled: No
> Connected: Yes
>
> ubuntu*CLI> sip show peers
> Name/username Host Dyn Forcerport
> ACL Port Status Description Realtime
> 0 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 0
> offline]
>
>
> This mi configuration,
>
> /etc/odbci.ini
>
> [asterisk-connector]
> Description = SQLite3 database
> Driver = SQLite3
> Database = /var/lib/asterisk/sqlite3dir/sqlite3.db
>
> /etc/odbcinst.ini
>
> [SQLite3]
> Description= SQLite3 ODBC Driver
> Driver=/usr/local/lib/libsqlite3odbc.so
> Setup=/usr/local/lib/libsqlite3odbc.so
> Threading=2
>
> /etc/asterisk/extconfig.conf
>
> [settings]
>
> sipusers => odbc,asterisk,sip_buddies
> sippeers => odbc,asterisk,sip_buddies
> sipregs => odbc,asterisk,sip_buddies
>
> /etc/asterisk/func_odbc.conf
>
> [SQL]
> dsn=asterisk
> readsql=${ARG1}
>
> /etc/asterisk/modules.conf
>
> autoload=yes
> ;preload => res_odbc.so
> ;preload => res_config_odbc.so
> noload => pbx_gtkconsole.so
> ;load => pbx_gtkconsole.so
> noload => pbx_kdeconsole.so
> noload => app_intercom.so
> noload => chan_modem.so
> noload => chan_modem_aopen.so
> noload => chan_modem_bestdata.so
> noload => chan_modem_i4l.so
> noload => chan_capi.so
> load => res_musiconhold.so
> noload => chan_alsa.so
> ;noload => chan_oss.so
> noload => cdr_sqlite.so
> noload => app_directory_odbc.so
> ;noload => res_config_odbc.so
> ;noload => res_config_pgsql.so
>
> /etc/asterisk/res_odbc.conf
>
> [asterisk]
> enabled => yes
> dsn => asterisk-connector
> pre-connect => yes
>
>
> Can someone help me?
>
> Thanks,
> Jordi
>
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20130217/c17e2ca4/attachment.htm>