Displaying 20 results from an estimated 30 matches for "vmwi".
Did you mean:
vmi
2012 Apr 04
1
issue with Digium TDM410P
The TDM410P doesn't support 'hvac', only the obsolete TDM400P supports that
option was for the old phones that have a neon light (or equivalent
LED+ZENER ciruit).
Are other phones off the TDM410P (other than the VTECH) working, or is the
Vtech the only model with VMWI available to you.
I'm not able to check at the moment, I have copied the asterisk-users list,
someone else may have had the same problem.
Alec
> -----Original Message-----
> From: ve2tmq at gmail.com [mailto:ve2tmq at gmail.com] On Behalf Of
> Mathieu Therrien
> Sent: Thursday,...
2005 Jan 26
2
off topic - DECT phones with FSK VMWI in the UK
Off topic but I am after a DECT phone to connect to my sipura 3000 that has
a FSK VMWI light or flashing envelope on the LCD screen. Any ideas
Chris
2004 Jan 06
0
Asterisk support for NEON or Centrex/CLASS/VMWI MW formats ?
...------- next part --------------
Hello
I have Scitec 5S-c Analog Phone connected to Asterisk PBX. This phone has Message Waiting Indicator but I don't see it lighted whenever any voice mail comes.
From phone documentation I came to know that this phone is compatible with NEON or Centrex/CLASS/VMWI message waiting formats. Could anyone please tell me if Asterisk PBX support these formats too. Do I need to do some configuration at * end to make use of MWI faeature.
My voicemail folder is /var/spool/asterisk/voicemail/default/610/INBOX
Regards
Tony
2009 Sep 01
2
1.6.1 + TDM840 FSK MWI problem
Hi,
Using 1.4.26.1 & DAHDI 2.2.0.2, FSK VMWI devices off a TDM840 work fine.
With 1.6.1.[45] & same DAHDI, instead of the FSK spill I get a line
polarity reversal. Stutter dialtone is generated as expected.
Has anyone else seen this? Is there anything special I need to do for
1.6.1 to make FSK MWI work?
Thanks,
--Barry
2005 Mar 22
4
multiline, cordless, expandable phone system and asterisk message waiting
Basically, pretty much all the 2 line cordless systems I've seen come with a
built in digital answering system that I'll never use, the main problem with
this is that these units don't support VMWI (visual message waiting
indicator) with telco supplied voicemail. This is a problem because I'll be
setup an Asterisk system in the next month or so to handle my 2 analog and 1
voip phone lines and I want to be able to know by looking at the phones that
there are messages waiting rather t...
2003 Apr 24
3
new mgcp patch errors
...CP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03
-- Delete connection 4 aaln/1@iptlf03-1 with new mode: recvonly on callid:
5a4b82ad79f47a70
-- MGCP Asked to indicate tone: on aaln/1@iptlf03-1 in cxmode: recvonly
-- MGCP mgcp_hangup(MGCP/aaln/1@iptlf03-1) on aaln/1@iptlf03 set vmwi(-)
-- MGCP Asked to indicate tone: vmwi(-) on aaln/1@iptlf03-1 in cxmode:
inactive
NOTICE[49156]: File chan_capi.c, Line 1435 (capi_handle_msg): CONNECT_IND
ID=002 #0x08a7 LEN=0045
--
Roy Sigurd Karlsbakk, Datavaktmester
ProntoTV AS - http://www.pronto.tv/
Tel: +47 9801 3356
Computers are...
2004 Jan 22
3
MGCP w/8x8 DTA-310 and as5300 pstn gateway
...oving
message fro
m aaln/1@172.16.2.25-1 tansaction 23
-- Resetting interface aaln/1@172.16.2.25
-- Endpoint 'aaln/1@172.16.2.25-1' observed 'hu'
-- MGCP handle_request(aaln/1@172.16.2.25-1) ast_channel already
destroyed
-- MGCP handle_request(aaln/1@172.16.2.25) set vmwi(-)
Jan 22 22:08:31 NOTICE[213006]: chan_mgcp.c:396 dump_queue: Removing
message fro
m aaln/1@172.16.2.25-1 tansaction 24
Jan 22 22:08:31 NOTICE[213006]: chan_mgcp.c:396 dump_queue: Removing
message fro
m aaln/1@172.16.2.25-1 tansaction 25
-- Resetting interface aaln/1@172.16.2.25
-- Endpoin...
2005 Jan 18
4
sipura 3000 mwi stutter problem
May be I have fiddled too much with my sipura settings but I can't get it to
give the stutter tone when there is a new voice mail waiting on the asterisk
box. I can either get a stutter tone all the time or not at all. Anyone
got this working.
Thanks
Chris
2009 Dec 17
2
Integrate a CPE with Asterisk in MGCP
...Resetting interface aaln/1 at 020202020202
== Spawn extension (mgcp, 0141909872, 2) exited non-zero on
'MGCP/aaln/1 at 020202020202-1'
-- MGCP handle_request(aaln/1 at 020202020202-1) ast_channel already
destroyed, resending DLCX.
-- MGCP handle_request(aaln/1 at 020202020202) set vmwi(-)
- Receive incoming calls through SIP PROXY : OK too, but as with the
outgoing calls, the interface seems to self restart :
-- Executing Dial("SIP/XXXSIPCALLID", "MGCP/aaln/1 at 020202020202") in
new stack
-- MGCP mgcp_request(aaln/1 at 020202020202)
-- MGCP cw: -1...
2004 Apr 12
2
SwissVoice IP10S not able to dial calls
....112-1' observed '7'
-- Endpoint 'aaln/1@10.1.24.112-1' observed '9'
-- Endpoint 'aaln/1@10.1.24.112-1' observed 'hu'
-- MGCP handle_request(aaln/1@10.1.24.112-1) ast_channel already
destroyed
-- MGCP handle_request(aaln/1@10.1.24.112) set vmwi(-)
Here are my configuration files:
MGCP.conf
===========
[10.1.24.112]
context=local
host=10.1.24.112
callerid = "Brad Chilton <7726>"
callgroup=0,2-5
canreinvite=no
pickupgroup=0,1
nat=no
threewaycalling=yes
transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to...
2003 Nov 03
2
MWI - I know this has been discussed in depth already
Let post this question.. Because I must be real slow... The following is
my config on this...
group=1
context=default
signalling=fxs_ks
channel => 1
context=local
signalling=fxo_ks
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
musiconhold=default
usecallerid=yes
2004 Jan 22
2
MGCP Problem.
Hi.
I'm new in Asterisk with MGCP. I set up a MGCP user agent and start asterisk
with the next configuration files.
'--------------- extensions.conf
----------------------------------------------------
[general]
static=yes
writeprotect=yes
[globals]
ap1 => mgcp/aaln/ap200@64.76.148.186
[macro-apl1]
exten => s,1,Dial(${ARG1},30,Ttmr)
;exten => s,2,Voicemail(u${MACRO_EXTEN})
2008 Apr 29
1
Annoying Sipura problem?
This may not be the right place to ask, but I have an annoying issue with
a Sipura/SPA1000-2.0.10(e) ATA device connected to an Asterisk box. (The
system is remote to me, so I've only been able to observe this by dialling
into a VoIP phone on-site, then run commands on the box remotely!)
First of all it's all working fine connected to an Asterisk box and the
user can make/take calls
2003 May 05
4
On-Hook ADSI
...ned that there
is some sort of standard apparently related to Caller ID to allow for a
Message Waiting Indicator tone that will turn the light on or off. For
those who care, the PowerTouch phones from Aastra support this famously
(and it has nothing to do with ADSI). A big light flashes red and a
VMWI event is triggered (allowing, for example, the voicemail softkey to
show up only when messages are waiting). It's extremely slick.
Since this tone plays onhook and apparently the ADSI spec is fine with
on-hook programming, I though that maybe I could use a special
application (maybe triggered...
2004 Aug 18
2
Festival Installation - Asterisk 1.0-RC2 && Debian Woody
...246.xx-1'
-- No command found on [203.33.246.xx] for transaction 168. Ignoring...
-- Endpoint 'aaln/1@203.33.246.xx-1' observed 'hu'
-- MGCP handle_request(aaln/1@203.33.246.xx-1) ast_channel already
destroyed
-- MGCP handle_request(aaln/1@203.33.246.xx) set vmwi(-)
In the festival server log I get:
client(8) Wed Aug 18 16:28:17 2004 : accepted from localhost
client(8) Wed Aug 18 16:28:17 2004 : disconnected
Assuming that the debian packages are not compatible, which version of
Festival do I need? The Wiki page mentioned above says to grab the
tarball...
2004 Dec 17
2
Call Queue Uniden UIP 200 not working
.... Lines start with '#' are comments
# 2. To leave a field value unchanged (as saved on local phone), leave value
to blank.
# 3. To set a field's value to empty, use '-' as value.
# 4. To NOT overwrite user local settings of: programmable key, one/two
touch keys, VMA
# number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is
"YES". This
# key will ALSO affect whether or not THESE settings in uniden<MAC>.txt
be used.
# 5. Any duplicate parameters exist in both unidencom.txt and
uniden<MAC>.txt, MAC settings
# will be used.
#...
2003 Oct 20
1
mgcp transfer takeback with ata186 (logs with comments - long post)
...(pbx, 7001, 1) exited non-zero on
'MGCP/aaln/1@217.114.96.220-0<ZOMBIE>'
-- Endpoint 'aaln/2@217.114.96.220-1' observed 'hu'
-- MGCP handle_request(aaln/2@217.114.96.220-1) ast_channel already
destroyed
-- MGCP handle_request(aaln/2@217.114.96.220) set vmwi(-)
*CLI> show channels
Channel (Context Extension Pri ) State Appl. Data
IAX2[virtupbx@virtupbx]/16384 (pbx t 1 ) Up
Busy (Empty)
1 active channel(s)
Hmm, in this case you can see aaln/2 being picked up so as to give a busy
tone dur...
2004 Aug 23
0
Swissvoice MGCP Error 502
...== Spawn extension (exten, 2815699913, 1) exited non-zero on
'SIP/64.72.107.2-0811d658'
-- Endpoint 'svip10@00059002042b-1' observed 'hu'
-- MGCP handle_request(svip10@00059002042b-1) ast_channel already
destroyed
-- MGCP handle_request(svip10@00059002042b) set vmwi(-)
mgcp.conf
------------
[00059002042b]
context=matthew
host=dynamic
callerid = "John Doe" <123>
callgroup=0
pickupgroup=0
nat=yes
threewaycalling=yes
transfer=yes ; transfer requires threewaycalling=yes. Use FLASH to
transfer
callwaiting=yes ; this might be a cause of troubl...
2004 Dec 16
0
SPA-3000 - Stop Message Waiting Indication
...e on the phone attached to Line 1 of
the SPA-3000 and it does 1 ring every now and again. How can it be doing
this if I dont have a mailbox= line in the asterisk config?
Any ideas how to stop the SPA-3000 detecting a message is waiting?
For now, I think i've got rid of it by disabling MWI and VMWI on the
SPA-3000 config but it would be nice to do it in Asterisk so my spa3k
config is as generic as possible.
Thanks
--ian
2005 Feb 18
2
MSG WAITING OFF on cordless handset not going away
I'm testing new cordless Motorola phone and the handset is constantly
displaying message: MSG WAITING OFF
According to the manual this message suppose to go off but it doesn't
Is it something that I can control via * ?
--
#Joseph