Hi I have a TDM400 and 4 channels of HPEC. I don't use the POTs lines much so I didn't realize it wasn't working. This morning I was watching the console and noticed that the echo canceller didn't load when a call came in. /etc/dahdi/system.conf showed mg2 for all 4 channels. I changed them all to hpec and then restarted dahdi and Asterisk and suddenly HPEC was working. Is there something I need to do with HPEC to make sure the dahdi_genconf generates a proper system.conf or is there somewhere else I show tell asterisk to use HPEC? Ira
At 11:23 AM 7/14/2010, you wrote:>Is there something I need to do with HPEC to make sure the >dahdi_genconf generates a proper system.conf or is there somewhere >else I show tell asterisk to use HPEC?Well, Moments later I found /etc/dahdi/genconf_parameters which seems to solve the problem. Sorry for the bother. Ira