search for: genconf_paramet

Hello, 1. How can specify in /etc/dahdi/genconf_parameters file that a port from a B410P board is to be "disabled". Playing with comments (see bellow) doesn't help : file /etc/asterisk/dahdi-channels.conf is filled with 4 ports data. pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE # SPAN...

...Memory at fe5fe800 (32-bit, non-prefetchable) [size=1K] Expansion ROM at 20020000 [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Kernel modules: wctdm24xxp # lsdahdi # modprobe wctdm24xxp # dahdi_genconf -v modules Default parameters from /etc/dahdi/genconf_parameters Generating /etc/dahdi/modules # cat modules # Autogenerated by /usr/sbin/dahdi_genconf (Dahdi::Config::Gen::Modules) on Fri Nov 26 12:02:11 2010 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. wctdm24xxp # dahdi_genconf -v system Default par...

Hi, I've just discovered that dahdi_genconf could create configuration files reading a single genconf_parameter file. 1. Is using dahdi_genconf recommended to configure dahdi or is it a helpful tool for specific devices or installation processes ? 2. If not, is there a custom mecanism that would prevent hand-edited files to be written over by dahdi_genconf (you can obviously remove execution rights to da...

Hi, My genconf_parameter is : # grep -v "^#" genconf_parameters lc_country fr context_lines remote group_lines 1 bri_sig_style bri echo_can oslec pri_termtype SPAN/* NT (I also tried various identations and syntax for pri_termtype line such as bri_termtype but I s...

Hi, I'm using Asterisk 1.6.1.18 with latest Dahdi Linux and Tools (rev 8854) and libpri 1.4.10.2. During installation, I'm facing this : # dahdi_genconf -v system Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Of course, I've got span descriptions in /etc/dahdi/genconf_parameters : .... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE SPAN/4 TE After installation, I've got : # lspci -vn | grep 139...

...ch just generates errors and does nothing (on zaptel 12.1). Then i install dahdi-linux and dahdi-tools and i want to start configuring it, so i am trying dahdi_genconf like the docs suggested which generates this really helpful error message : /usr/sbin/dahdi_genconf: Cannot read '/etc/dahdi/genconf_parameters': No such file or directory Also the config files and everything are much more complicated for dahdi than they were for zaptel There was some nice documentation and examples on how to get started with configuring certain devices with zaptel on the digium page, for my TDM11B they only m...

...d=13897) with a Junghanns QuadBRI. 1. Do I still need qozap driver ? If positive, how is it recommended to get it ? 2. Which line should be included in /etc/dahdi/modules to have the appropriate driver loaded ? 3. The process I'm planning to use is : A- Hand edit /etc/dadhi/modules, /etc/dadhi/genconf_parameters and /etc/asterisk/chan_dadhi.conf. B- Use dahdi_genconf to generate /etc/dadhi/system.conf and /etc/asterisk/dadhi_channels.conf. Any suggestion ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachmen...

Hello, On a very new system, I've got : # cat /etc/dahdi/genconf_parameters | grep -v "^#" lc_country fr context_lines remote group_lines 1 bri_sig_style bri_ptmp echo_can oslec pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 TE SPAN/4 TE...

Hi, I'm using revision 6822 of Dahdi Tools. # dahdi_hardware pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P # asterisk -rx "dahdi show version" DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC # cat /etc/dahdi/genconf_parameters ... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 NT SPAN/4 NT # dahdi_genconf system # dahdi_genconf # cat /etc/dahdi/system.conf ... # Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS span=2,2,0,ccs,ami # termtype: te...

...How to properly re-configure dahdi, when for instance I want to change from TE to NT mode ? I'm planning the following operations : /etc/init.d/asterisk stop /etc/init.d/dahdi stop rmmod dahdi rm /etc/asterisk/dahdi-channels.conf rm /etc/dahdi/system.conf rm /etc/dahdi/modules nano /etc/dahdi/genconf_parameters dahdi_genconf -v modules dahdi_genconf -v system dahdi_genconf -v chandahdi Am I missing something ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101023/b673dcc3/attachment.htm

On Thursday 28 Apr 2016, Mamadou NGOM wrote: > Hello, > it doesn't work my dahdi yet .for information, i use debian 8 . > I put the file dahdi.bash in /etc/init.d and I gave it the permission 755 > but i have the same error: bash: /etc/init.d/dahdi: No such file or > directory You need to name the file just "dahdi", not "dahdi.bash"; because the command

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we get the following message: [Jan 21 17:33:42] ERROR[20418]: chan_dahdi.c:12645 dahdi_pri_error: Received MDL/TEI...

<!DOCTYPE html> <html><head> <meta charset="UTF-8"> </head><body><p>Hello,</p><p>I have not resolved my problem.I renamed my  dahdi file  "mv dahdi.bash dahdi " in the directory /etc/init.d, but it doesn'nt work yet.</p><p>the same error after the command  <strong>/etc/init.d/dahdi

Hi I have a TDM400 and 4 channels of HPEC. I don't use the POTs lines much so I didn't realize it wasn't working. This morning I was watching the console and noticed that the echo canceller didn't load when a call came in. /etc/dahdi/system.conf showed mg2 for all 4 channels. I changed them all to hpec and then restarted dahdi and Asterisk and suddenly HPEC was working. Is

Hi, On lenny, when I'm adding a "blacklist hfc4s8s_l1" statement in a /etc/modprobe.d/myfile.conf file, this change seems ineffective until I reboot : # dahdi_genconf -v system Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Generating /etc/dahdi/system.conf I tried this : /etc/init.d/module-init-tools then this : /etc/init.d/udev restart but still, I'm getting the "Empty configuration" answer. If I reboot the system, the "dahdi_genconf -v system" command wor...

...Olivier <oza_4h07 at yahoo.fr> > Hi, > > On lenny, when I'm adding a "blacklist hfc4s8s_l1" statement in a > /etc/modprobe.d/myfile.conf file, this change seems ineffective until I > reboot : > # dahdi_genconf -v system > Default parameters from /etc/dahdi/genconf_parameters > Empty configuration -- no spans > Generating /etc/dahdi/system.conf > > I tried this : > /etc/init.d/module-init-tools > then this : > /etc/init.d/udev restart > but still, I'm getting the "Empty configuration" answer. > > If I reboot the system, the...

...es anyone have any idea what might be causing the card to get detected as card 255 instead of card 0, and then not start? There are no other telephony cards (or expansion cards of any kind) installed in the non-working server. If I run dahdi_genconf -vvv, I get: Default parameters from /etc/dahdi/genconf_parameters Generating /etc/dahdi/system.conf Generating /etc/asterisk/dahdi-channels.conf Subsequently running dahdi_cfg -vvv gives the following: https://gist.github.com/DrDeke/9436856 Examining the /etc/dahdi/system.conf that gets generated confirms that no cards or spans were configured: htt...

...# lsmod|grep -E 'dahdi|wct' wcte43x 56864 0 oct612x 162715 1 wcte43x dahdi 212318 2 oct612x,wcte43x crc_ccitt 12347 1 dahdi However, dahdi_genconf keeps finding no span: # dahdi_genconf -vvv Default parameters from /etc/dahdi/genconf_parameters Empty configuration -- no spans Generating /etc/dahdi/assigned-spans.conf Empty configuration -- no spans Generating /etc/dahdi/system.conf Empty configuration -- no spans Generating /etc/asterisk/dahdi-channels.conf What am i missing? Thank you, -- Bertrand LUPART -------------- next pa...

...ting alarm conditions. * dahdi_scan: Report more detailed alarm information. * xpp_fxloader: - Load firmware in the background - Support 1163 twinstar devices - A delay loop for older kernels (e.g. 2.6.18) * astribank_is_starting does not depend on libusb. * Allow using CONNECTOR/LABEL in genconf_parameters for pri_termtype For a full list of changes in these releases, please see the ChangeLogs at http://svn.asterisk.org/svn/dahdi/linux/tags/2.4.0/ChangeLog and http://svn.asterisk.org/svn/dahdi/tools/tags/2.4.0/ChangeLog Issues found in these releases can be reported at http://issues.asterisk.org...

...ting alarm conditions. * dahdi_scan: Report more detailed alarm information. * xpp_fxloader: - Load firmware in the background - Support 1163 twinstar devices - A delay loop for older kernels (e.g. 2.6.18) * astribank_is_starting does not depend on libusb. * Allow using CONNECTOR/LABEL in genconf_parameters for pri_termtype For a full list of changes in these releases, please see the ChangeLogs at http://svn.asterisk.org/svn/dahdi/linux/tags/2.4.0/ChangeLog and http://svn.asterisk.org/svn/dahdi/tools/tags/2.4.0/ChangeLog Issues found in these releases can be reported at http://issues.asterisk.org...