I have a TE205P that has been working fine for 2 years. power outage yesterday took out my everything for over an hour. Everything has come back up except the PRI. My provider has checked it to the box and says everything looks good on their end. I get this message: [Jul 9 12:40:32] WARNING[13709] chan_dahdi.c: No D-channels available! Using Primary channel 24 as D-channel anyway! ztcfg -vvv Zaptel Version: 1.4.12.1 Echo Canceller: MG2 Configuration ===================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 18: Clear channel (Default) (Slaves: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) 7 channels to configure. and show status gives me condition RED of course. How do I find out whats wrong here? Jerry
Jerry Geis wrote:> and show status gives me condition RED of course. >What's the output of pri show span 1? Check your cable. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
On Fri, Jul 9, 2010 at 12:42 PM, Jerry Geis <geisj at pagestation.com> wrote:> and show status gives me condition RED of course. >Physical problem, check cables / telco -- Paul Belanger | dCAP Polybeacon | Consultant Jabber: paul.belanger at polybeacon.com | IRC: pabelanger (Freenode) blog.polybeacon.com
I have found that sometimes shutting down the machine waiting a full minute while the power cable is unplugged then restarting can fix such problems if it's power related. On Fri, Jul 9, 2010 at 12:42 PM, Jerry Geis <geisj at pagestation.com> wrote:> I have a TE205P that has been working fine for 2 years. > power outage yesterday took out my everything for over an hour. > > Everything has come back up except the PRI. My provider has checked it > to the box > and says everything looks good on their end. > > I get this message: > [Jul ?9 12:40:32] WARNING[13709] chan_dahdi.c: No D-channels available! > Using Primary channel 24 as D-channel anyway! > > ztcfg -vvv > > Zaptel Version: 1.4.12.1 > Echo Canceller: MG2 > Configuration > =====================> > SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) > > Channel map: > > Channel 18: Clear channel (Default) (Slaves: 18) > Channel 19: Clear channel (Default) (Slaves: 19) > Channel 20: Clear channel (Default) (Slaves: 20) > Channel 21: Clear channel (Default) (Slaves: 21) > Channel 22: Clear channel (Default) (Slaves: 22) > Channel 23: Clear channel (Default) (Slaves: 23) > Channel 24: D-channel (Default) (Slaves: 24) > > 7 channels to configure. > > and show status gives me condition RED of course. > > How do I find out whats wrong here? > > Jerry > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > ? ? ? ? ? ? ? http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > ? http://lists.digium.com/mailman/listinfo/asterisk-users >