On Mar 2, 2010, at 6:27 PM, sean darcy wrote:
> I've just got Uverse installed. I had dsl, but ATT insisted I
couldn't
> keep my old dsl, but had to switch to Uverse internet - vdsl.
>
> My setup:
>
> linux box as router : 10.10.11.252
>
> asterisk box: 10.10.11.180
>
> 10.10.11.252 is multihomed and connected to the Uverse Residential
> Gateway. I've set it up as DMZplus, and it shows the public ip address
> as eth1. I can ssh into the linux box from outside.
>
> sip worked fine with dsl. I used teliax, junction and direct sip to the
> asterisk box in the office. I can ssh from 10.10.11.180 to the office.
>
> But not now. The asterisk box sends out sip messages, but nothing comes
> in. In the office asterisk box, I don't see the sip messages come in.
>
> Is anybody using sip behind a Uverse RG? Care to share the magic?
>
> sean
Sean,
I had att u-verse up until a week ago and loved it. Ran Asterisk behind it with
great success. (I only left u-verse because of a physical move).
Anyway, by default the u-verse router simply will block upd like noone's
business. Make sure you have a firewall and then tell the u-verse router to open
everything to that firewall (and proceed like you did on dsl). If you change the
mac of your firewall, you'll need to reauth it again.
---fred
http://qxork.com