similar to: Fax t38 capability

Hello, I have Asterisk 1.6.1.12 with FAX For Asterisk Components: Applications: 1.6.1.5_1.1.6 Digium FAX Driver: 1.6.1.5_1.1.6 (optimized for core2_32) If I use call file with spool -------------------------------------------- Channel: SIP/IP/DEst No MaxRetries: 0 RetryTime: 10 WaitTime: 50 Application:SendFAX Data:/var/spool/asterisk/test.tif

Hi, im using a Asterisk Server which is not behind NAT. First i had problems with the fax detection. But this is now solved after adding a wait(2) at the correct place. But i'm still unable to receive a fax due to res_rtp_asterisk.c:3548 ast_rtp_read: RTP Read too short after the Fax session has started. My sip.conf includes [general] allowguest=no alwaysauthreject=yes sendrpid=rpid

I am testing Fax for Asterisk. But, I meet a problem. I try to Send a Fax (.tiff) from the first asterisk (Asterisk1) to the second asterisk (Asterisk2). Asterisk1 initiates an INVITE with audio G.711. Asterisk2 accepts this INVITE. Immediately, Asterisk2 sends an re-INVITE with T.38 to Asterisk1. But, Asterisk1 responds with "488 not acceptable here". I double check t38pt_udptl = yes in

Hello users, Recently i have installed the free version of FaxForAsterisk and trying to work with it by sending a fax on T38. My version information is as follows i)Asterisk 1.6.0.20 ii)res_fax-1.6.0.14_1.1.6-x86_32 iii)res_fax_digium-1.6.0.14_1.1.6-i686_32 sip.conf [general] t38pt_udptl=yes extensions.conf [default] exten => _XXXXXXXXXX,1,NoOp(Fax Incoming Call) exten =>

Hi all, I have problem for receiving fax from multiple page fax that sent from fax machine (analog). The error is : WARNING T.30 Page did not end cleanly This is my dialplan [inboundfax] exten => s,1,NoOp(**** FAX RECEIVED from ${CALLERID(num)} ${STRFTIME(${EPOCH},,%c)} ****) exten => s,n,Set(FAXOPT(ecm)=yes) exten =>

Hi Guys, i am using the latest version of asterisk 1.4 (1.4.33.1), dahdi (2.3.0.1) and FFA (Applications: 1.4_1.2.0, Digium FAX Driver: 1.4_1.2.0). the issue i'm having is that i'm able to receive faxes from a website (that offer this service) but not able to receive from a regular fax machine (that is working perfect). [fax-rx] exten => receive,1,NoOp(**** FAX RECEIVE ****) exten

Hi all, I am running to the following problem, when using the below dialplan to receive fax, everything works perfect till this line exten => receive,n,ReceiveFAX(${FAXFILE}): and then the following line cannot be executed, it's like asterisk can't go back to dialplan and continue, the good news is when i check what is received in my fax folder i find that the file is a valid one (not

I am having troubles with sending faxes. I hope someone can help me work out a better method. Basically we have a special address that our users can send to. It winds up on our Asterisk server which runs a Python script that parses the message for attachments and the phone number from the recipient address. The attachments are converted to TIFF and stored in a folder with various information

Hello, I need to send a tiff via fax with my asterisk 1.6.1.0. I tried in the dialplan [default] exten => _X.,1,SendFax(/root/test.tiff) but I have: salledeconf1*CLI> console dial 111 at default [Dec 23 16:24:22] WARNING[31739]: chan_oss.c:492 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory -- Executing [111 at default:1]

Hello, after I solved my problem with the fax processing after receiving, I got another problem while sending a fax: the header is not set properly. I use a PHP_Script to upload a PDF file and to generate a call file. A bash script is looking for existent call files in the web directory and moves them the asterisk's outgoing directory. Ok, my call file looks like this: ====== $cf_commands

Hi, thanks for your answer. Unfortunately this is, what I already know. I was wondering, why it is possible to set ID and Header for an outgoing fax (which will then in turn be inserted via asterisk on top of the transferred "image") , while it seems to not be possible to get the Header from a received fax (only the id), although it is present in the faxdocument. The ID is also

I am testing out inbound faxing using res_fax and res_fax_spandsp.so My system answers the call but then sets there on the ReseiveFax line then comes back with an error that it exceeded the maximum retries. How would I go about debugging this? Below is my very simple dialplan code I am using, and the fax show version gives the following as well. FAX For Asterisk Components:

Hi, I am using asterisk 11.8 in combination with spandsp to send and receive T38 Faxes. All works fine, but I do not know how to get the remoteheader from the fax I receive. When I send a fax, there are Faxopts to set the localstationid and the headerinfo, but for receiving, there seems to only exist the Faxopts remotestationid but for sure on any fax I receive there is a remoteheaderinfo

On Wed, Jun 24, 2015 at 08:15:06AM +0200, tux john wrote: > i would like to add email to fax functionality to the system. could someone > point me to the right direction to see how please? I don't have a general solution, since I haven't needed to send faxes recently. But I did set up my dialplan so that I could test that it works. I used this: ---- ;; For outgoing faxes

We're having an issue where we call ReceiveFax in a context that includes a hangup extension and half the time dialplan execution doesn't continue after the fax is received successfully. Am I missing something simple here? Below is a sample call where this happened: The last log line for this channel/call is: [Feb 21 09:10:53] VERBOSE[13730] res_fax_digium.c: -- Channel

Hello. I've been trying to setup Free Fax for Asterisk on a Debian machine with Asterisk 1.8. I have managed to register and installed the Digium modules. Sending and receiving through it have resulted in failure. The output of fax show capabilities is: Registered FAX Technology Modules: Type : DIGIUM Description : Digium FAX Driver Capabilities : SEND

Dear colleagues, after hundreds of hours I finally managed to figure out how to send faxes from a T.38 capable endpoint reliably via Asterisk / PJSIP. My setup is as follows: A T.38 capable endpoint sends the fax to Asterisk which passes the fax to a T.38 capable trunk which then sends the fax to its final destination. This works great, but I have left a little problem which I couldn't solve

In my quest to actually send a fax, I'm now stuck trying to send the confirm. First I send the fax: -- Executing [send at outbound-fax:2] System("Console/dsp", "env echo -e "Channel:DAHDI/g0/12036378447\\nContext:fax-tx\\nExtension: s\\nPriority: 1\\n" >/var/spool/asterisk/outgoing/call-1254012878.0") in new stack -- Auto fallthrough, channel

Hi, I am trying to add header to fax while sending fax. I can add some information to header but some information added automatically (date and page count). I want to format this information. Header => Date | ${LOCALHEADERINFO} | ${FAXOPT(localstationid)} | Page Count I can set LOCALHEADERINFO and FAXOPT(localstationid) but i cant find any variable for "Page Count" and