Hi Jerry,
If you are calling that number from Asterisk via T1 and you do not get
ANSWER/CONNECT message
from that particular number/line then a workaround might not work.
It's simply because there's no connectivity. You might only have
early audio one way from that PA line to you but not the other way
around.
Martin
On Thu, Apr 2, 2009 at 11:44 AM, Jerry Geis <geisj at pagestation.com>
wrote:> Is there anyway a T1/PRI can ignore the ANSWERED signal and just go
> straight from a dial command
> to the call was answered?
>
> I have a PBX that when calling a certain analog trunk it is not giving
> me signaling that the call was
> answered however I hear the PA system come off hook and give dial tone.
>
> So is there something in the dial command that can override the
> signaling and just go straight to the answered
> state so my AGI runs?
>
> The T1 is functioning normal for all other calls. Its just to this
> analog trunk that has the PA system connected to it.
>
> Jerry
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> ? http://lists.digium.com/mailman/listinfo/asterisk-users
>