asterisk users - Nov 2008 - ztdummy: rtc: lost some interrupts at 1024Hz.

Hi,

I'm getting crazy about ztdummy. I have to replicate a PBX where ztdummy 
is working fine but for some reason I cannot.
The two machines have the same kernel, motherboard, the same gcc version 
and the same zaptel 1.4.8. On the second machine zaptel compiles without 
errors and ztdummy.ko is generated but when I modprobe it I get the 
following error in messages:
rtc: lost some interrupts at 1024Hz.
Since modules sizes are slighly different I copied the working ztdummy 
on the new machine so the files are the same.....nothing changes!!

Any help is appreciated.

Thank you.

-- 

_________________________________________________
Giorgio Incantalupo, mailto:gincantalupo at fgasoftware.com
FG&A srl - http://www.fgasoftware.com -
Voice at Work - The Agile PBX http://www.voiceatwork.eu
Tel: 02997663.14, Fax: 0291390172

I remember having that issue once and I fixed it by changing a
configuration in the motherboard BIOS.  It was related to the SATA hard
drive mode it was running on.  The default configuration was set to
legacy mode I believe and when I changed it to enhanced mode the lost of
interrupts problem I was having went away.  I had a Supermicro
motherboard in case you were curious. 

Remi Quezada

Giorgio Incantalupo wrote:
> Hi,
>
> I'm getting crazy about ztdummy. I have to replicate a PBX where
ztdummy
> is working fine but for some reason I cannot.
> The two machines have the same kernel, motherboard, the same gcc version 
> and the same zaptel 1.4.8. On the second machine zaptel compiles without 
> errors and ztdummy.ko is generated but when I modprobe it I get the 
> following error in messages:
> rtc: lost some interrupts at 1024Hz.
> Since modules sizes are slighly different I copied the working ztdummy 
> on the new machine so the files are the same.....nothing changes!!
>
> Any help is appreciated.
>
> Thank you.
>
>