Hi all..
I`m with a problem in some E1 cards. The value of Bipolar Viol is too
big, and some times the link seems well, but isn`t work correctly, like
as if the link is down.
Normally, I use to stop asterisk, remove the modules from my card, use
modprove to set up they again, and start asterisk, and it come to work,
but in some times I have to reboot the server, and then the value of
Bipolar Viol. seems short than before, so everything works well again.
My values:
asterisk*CLI> zap show status
Description Alarms IRQ bpviol CRC4
Fra Codi Options LBO
Tormenta 3 (PCI) Quad E1 Card 0 Span 1 OK 0 5904 0
CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
Tormenta 3 (PCI) Quad E1 Card 0 Span 2 OK 0 9449 0
CCS HDB3 YEL 0 db (CSU)/0-133 feet (DSX-1)
Tormenta 3 (PCI) Quad E1 Card 0 Span 3 BLU/RED 0 0 0
CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
Tormenta 3 (PCI) Quad E1 Card 0 Span 4 BLU/RED 0 0 0
CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1)
How could I solve this problem? What can make this value of Bipolar Vil.
so big?
thank`s for the opportunity.
Everton
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080422/cb079000/attachment.htm
