asterisk users - Mar 2008 - Dialing off-hook with Polycom SoundPoint IP 430

Hi...

 

I've been fighting this for a while now, trying clean builds of Asterisk
1.14.18, 1.14.19rc3, and then 1.6 Beta 6 today.

 

No workee. :-(

 

Here's the results for various calls made off-hook (push the blue
Speakerphone button on the Polycom 430):

 

988852700 - Phone waits for me to either hit the soft-key "Send" or
"EndCall". If I hit "Send", it dials through with no
problem.

98168852700 - Before I get the last "0" pressed, the phone presents me
with a second dial tone and a prompt at the top of the screen, "Enter
more digits". Asterisk console presents

 

"== Using SIP RTP CoS mark 5"

 

917852963296 - Before I get the "96" pressed, results as immediately
above.

 

If I dial these numbers with the phone on-hook, and press "dial" they
work fine.

 

If I modify my dialplan to remove the dial nine requirement, all three
methods of dialing out, off-hook, work fine...although I do have to
press "Send" when dialing 8852700.

 

The seemingly relevant portion of the dialplan is as follows:

 

;********************************************************************

; BEGIN - Outbound Call Handling

;********************************************************************

          ;

[outbound-local]

     exten => _9NXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})

     exten => _9NXXXXXX,n,Congestion()

     exten => _9NXXXXXX,n,Hangup()

 

     exten => _9NXXNXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})

     exten => _9NXXNXXXXXX,n,Congestion()

     exten => _9NXXNXXXXXX,n,Hangup()

 

     exten => 911,1,Dial(${TRUNK0}/911)

     exten => 9911,1,Dial(${TRUNK0}/911)

 

[outbound-long-distance]

     exten => _91NXXNXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})

     exten => _91NXXNXXXXXX,n,Congestion()

     exten => _91NXXNXXXXXX,n,Hangup()

 

[hang-up]

          ; Hang up

          ;

     exten => s,1,Playback(thank-you-for-calling)

     exten => s,n,Playback(goodbye)

     exten => s,n,Hangup()

          ;

          ;

;********************************************************************

; END - Outbound Call Handling

;*******************************************************************

 

The only difference between the Asterisk versions is the presence on the
Asterisk console of an error message with Asterisk 1.4.18 and 1.4.19rc3,
which is similar to the one noted on the forums: "NOTICE[6145]:
chan_sip.c:13795 handle_request_invite: Failed to authenticate user
"6000" <sip:6000 at 10.10.xxx.xxx>;tag=whatever it was" I
do not see that
error message on the Asterisk console for 1.6 Beta 6.

 

The forums note which seems in the neighborhood is at

 

 
http://forums.digium.com/viewtopic.php?p=63872&sid=aff61bbd5ddeea61bc831
239b220db23

 

Anyone have any bright ideas on what might be wrong and/or
troubleshooting tips?

 

...brig 

--

Please direct emails to ITHelpDesk at tkaccess.com
<blocked::mailto:ITHelpDesk at tkaccess.com>  or call 816-767-5549. This
will help with issues getting full exposure to the dept and allow for
the quickest response.

 

Brig C. McCoy

IT Help Desk

ThyssenKrupp Access Corporation

4001 East 138th Street

Grandview, MO 64030 USA

Phone: +1 816-767-5577

Fax:       +1 816-765-6459

Email: Brig.McCoy at tkaccess.com <mailto:Brig.McCoy at tkaccess.com> 

Internet: www.tkaccess.com <http://www.tkaccess.com/>   www.thelev.com
<http://www.thelev.com> 

 

"Committed to Improving the Quality of Life. ThyssenKrupp Access, the
world's most trusted name in 
accessibility and home elevator solutions"

 


As you are aware, messages sent by e-mail can be manipulated by third parties.
For this reason our e-mail messages are usually not legally binding. This
electronic message (including any attachments) contains confidential information
and may be privileged or otherwise protected from disclosure. The information is
intended to be for the use of the intended addressee only. Please be aware that
any disclosure, copy, distribution or use of the contents of this message is
prohibited. If you have received this e-mail in error please notify me
immediately by reply e-mail and delete this message and any attachments from
your system. Thank you for your cooperation.


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20080326/134f6a2f/attachment.htm

What does your digitmap on your phone look like? This is what  
controls sending the call to * when it recognizes a complete dial  
pattern. The phone does not send digit by digit. If it is waiting for  
you to press send, then it does not recognize your pattern.


On Mar 26, 2008, at 8:18 AM, Brig C. McCoy wrote:
> Hi?
>
>
>
> I?ve been fighting this for a while now, trying clean builds of  
> Asterisk 1.14.18, 1.14.19rc3, and then 1.6 Beta 6 today.
>
>
>
> No workee. L
>
>
>
> Here?s the results for various calls made off-hook (push the blue  
> Speakerphone button on the Polycom 430):
>
>
>
> 988852700 ? Phone waits for me to either hit the soft-key ?Send? or  
> ?EndCall?. If I hit ?Send?, it dials through with no problem.
>
> 98168852700 ? Before I get the last ?0? pressed, the phone presents  
> me with a second dial tone and a prompt at the top of the screen,  
> ?Enter more digits?. Asterisk console presents
>
>
>
> ?== Using SIP RTP CoS mark 5?
>
>
>
> 917852963296 ? Before I get the ?96? pressed, results as  
> immediately above.
>
>
>
> If I dial these numbers with the phone on-hook, and press ?dial?  
> they work fine.
>
>
>
> If I modify my dialplan to remove the dial nine requirement, all  
> three methods of dialing out, off-hook, work fine?although I do  
> have to press ?Send? when dialing 8852700.
>
>
>
> The seemingly relevant portion of the dialplan is as follows:
>
>
>
> ;********************************************************************
>
> ; BEGIN - Outbound Call Handling
>
> ;********************************************************************
>
>           ;
>
> [outbound-local]
>
>      exten => _9NXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})
>
>      exten => _9NXXXXXX,n,Congestion()
>
>      exten => _9NXXXXXX,n,Hangup()
>
>
>
>      exten => _9NXXNXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})
>
>      exten => _9NXXNXXXXXX,n,Congestion()
>
>      exten => _9NXXNXXXXXX,n,Hangup()
>
>
>
>      exten => 911,1,Dial(${TRUNK0}/911)
>
>      exten => 9911,1,Dial(${TRUNK0}/911)
>
>
>
> [outbound-long-distance]
>
>      exten => _91NXXNXXXXXX,1,Dial(${TRUNK0}/${EXTEN:1})
>
>      exten => _91NXXNXXXXXX,n,Congestion()
>
>      exten => _91NXXNXXXXXX,n,Hangup()
>
>
>
> [hang-up]
>
>           ; Hang up
>
>           ;
>
>      exten => s,1,Playback(thank-you-for-calling)
>
>      exten => s,n,Playback(goodbye)
>
>      exten => s,n,Hangup()
>
>           ;
>
>           ;
>
> ;********************************************************************
>
> ; END - Outbound Call Handling
>
> ;*******************************************************************
>
>
>
> The only difference between the Asterisk versions is the presence  
> on the Asterisk console of an error message with Asterisk 1.4.18  
> and 1.4.19rc3, which is similar to the one noted on the forums:  
> ?NOTICE[6145]: chan_sip.c:13795 handle_request_invite: Failed to  
> authenticate user "6000" <sip:6000 at
10.10.xxx.xxx>;tag=whatever it
> was? I do not see that error message on the Asterisk console for  
> 1.6 Beta 6.
>
>
>
> The forums note which seems in the neighborhood is at
>
>
>
>                 http://forums.digium.com/viewtopic.php? 
> p=63872&sid=aff61bbd5ddeea61bc831239b220db23
>
>
>
> Anyone have any bright ideas on what might be wrong and/or  
> troubleshooting tips?
>
>
>
> ?brig
>
> --
>
> Please direct emails to ITHelpDesk at tkaccess.com or call  
> 816-767-5549. This will help with issues getting full exposure to  
> the dept and allow for the quickest response.
>
>
>
> Brig C. McCoy
>
> IT Help Desk
>
> ThyssenKrupp Access Corporation
>
> 4001 East 138th Street
>
> Grandview, MO 64030 USA
>
> Phone: +1 816-767-5577
>
> Fax:       +1 816-765-6459
>
> Email: Brig.McCoy at tkaccess.com
>
> Internet: www.tkaccess.com  www.thelev.com
>
>
>
> "Committed to Improving the Quality of Life. ThyssenKrupp Access,  
> the world's most trusted name in
> accessibility and home elevator solutions"
>
>
>
> As you are aware, messages sent by e-mail can be manipulated by  
> third parties. For this reason our e-mail messages are usually not  
> legally binding. This electronic message (including any  
> attachments) contains confidential information and may be  
> privileged or otherwise protected from disclosure. The information  
> is intended to be for the use of the intended addressee only.  
> Please be aware that any disclosure, copy, distribution or use of  
> the contents of this message is prohibited. If you have received  
> this e-mail in error please notify me immediately by reply e-mail  
> and delete this message and any attachments from your system. Thank  
> you for your cooperation.
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

[This email is either empty or too large to be displayed at this time]