Lyle Giese
2007-Nov-03 13:37 UTC
[asterisk-users] [Fwd: voicemail locked up Asterisk 1.4.13]
The orginal did not make it to the list... Spam filter issue??? No repeat of the lockup yet. Lyle -------- Original Message -------- Subject: voicemail locked up Asterisk 1.4.13 Date: Thu, 01 Nov 2007 20:57:27 -0500 From: Lyle Giese <lyle at lcrcomputer.net> To: Asterisk Users Mailing List - Non-Commercial Discussion <asterisk-users at lists.digium.com> I am running Asterisk 1.4.13 with libpri 1.4.2 and zaptel 1.4.6 on openSuSE 10.2 (64bit kernel) with an AMD dual core 64 bit processor at 2ghz and 1g of ram. Motherboard has a VIA chipset. Using an Adtran chan bank to interface the incoming POTS lines via a Digium single T1 pci card. Very lightly loaded system used in a SOHO environment. Asterisk ran flawlessly under 1.0.x for a long time on an older motherboard with this chan bank and T1 card. Today, we started getting callerid failures on incoming calls(checksum errors and invalid callerid errors). On one line, I had programmed * to send invalid or missing CallerID directly to voicemail without ringing any phones. We went out for lunch and came back and found 4 new voice messages. However voicemail would not let us log in. We called voicemail, inputed the vm box number and were prompted for the password and punched it in. And all Allison would say is 'login incorrect'. All voicemail boxes. We were locked out of voice mail. No error messages anywhere that I can find. Restarted Asterisk and VoiceMail now works. Logged in and listened to the voice messages, etc. I know, it's not much to go on, but is there something I can set to get more verbose error messages, if this happens again? Thanks, Lyle Giese LCR Computer Services, Inc. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071103/ab80c525/attachment.htm