asterisk users - Dec 2006 - X100P "rings" randomly when "phone" line makes call

Not sure if anyone experienced the same - or if anyone ever connected a POTS 
phone to the "Phone" jack on an X100P card.

The POTS phone rings normally when the FXO receives a call.  The POTS phone 
can also make outgoing calls when FXO is not holding the line.  This is 
desired.  But if a call connected to the POTS phone lasts longer than a 
couple of minutes, Asterisk would receive "ring" conditions from X100P
at
seemingly random intervals, and kick off incoming dialplan associated with 
the Zap channel.

I turned verbose to 6 and debug to 6, but all I could see was:
    -- Starting simple switch on 'Zap/1-1'

Any idea how I can find the cause?  Thank you.

System is Asterisk 1.2.13 on Ubuntu 6.

Yuan Liu

Yuan LIU wrote:
> Not sure if anyone experienced the same - or if anyone ever connected 
> a POTS phone to the "Phone" jack on an X100P card.
>
> The POTS phone rings normally when the FXO receives a call.  The POTS 
> phone can also make outgoing calls when FXO is not holding the line.  
> This is desired.  But if a call connected to the POTS phone lasts 
> longer than a couple of minutes, Asterisk would receive "ring" 
> conditions from X100P at seemingly random intervals, and kick off 
> incoming dialplan associated with the Zap channel.

I experienced a similar problem, when my FXO was not the only port 
terminating the PSTN-interface, but I had a normal phone set connected 
in parallel as well.

>
> I turned verbose to 6 and debug to 6, but all I could see was:
>    -- Starting simple switch on 'Zap/1-1'
>
> Any idea how I can find the cause?  Thank you.
>
> System is Asterisk 1.2.13 on Ubuntu 6.
>
> Yuan Liu
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>