Hi, I just got hold on an Orion E1 30 port GSM Gateway, and I am having problems trying to get the E1 link to come up. I am using Asteisk 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both the Digium and Samgoma types, as I have successfully hooked up to many PBX's and such, but I just cant seem to get this one to work. None of the 30 channels 'come up'. What signailling, crc checking, should I be Master or slave? Anybody have experience on this? -- thanks, yusuf -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
yusuf wrote:> Hi, > > I just got hold on an Orion E1 30 port GSM Gateway, and I am having > problems trying to get the E1 link to come up. I am using Asteisk > 1.2.12 with a Sangoma A101 card. I am quite familiar with E1's, both > the Digium and Samgoma types, as I have successfully hooked up to many > PBX's and such, but I just cant seem to get this one to work. > > None of the 30 channels 'come up'. What signailling, crc checking, > should I be Master or slave?Sanity check: Have you read the fine manual :)? I understand Orion makes both ISDN PRI/Q.SIG and MFC/R2 type E1 channel banks. If it's the PRI type, standard zaptel with the appropriate NET/CPE setting on the CB should be ok. If it's a MFC/R2, then you'll have to try unicall. Leo