>From WIKI:D(digits): After the called party answers, send digits as a DTMF stream, then connect the call to the originating channel. (You can also use 'w' to produce .5 second pauses.) When I use the D option to send a call to my paging system and pick a zone, the Tone is too early. I have tried the 'w' option, but it does not appear to work. No matter how many 'w's I use, the tone is still immediately on answer. Is this a known issue? Is there a work around? My current workaround is to send both channel to a meetme that runs a macro to play the tone. This is way to much overhead to play a single tone after .5 or 1 seconds. Please advise. Thank You, Steven BerkHolz Board member of www.glimasoutheast.org
----- Original Message ----- From: "BerkHolz, Steven" <StevenBerkHolz@TESCOGroup.com> To: <asterisk-users@lists.digium.com> Sent: Wednesday, November 01, 2006 1:27 AM Subject: [asterisk-users] dial D option with w for wait?>From WIKI:D(digits): After the called party answers, send digits as a DTMF stream, then connect the call to the originating channel. (You can also use 'w' to produce .5 second pauses.) When I use the D option to send a call to my paging system and pick a zone, the Tone is too early. I have tried the 'w' option, but it does not appear to work. No matter how many 'w's I use, the tone is still immediately on answer. Did you find a resolution to this? Cameron