----- Original Message ----- From: Wasif [mailto:wasif@thecommstore.com] To: asterisk-users@lists.digium.com Sent: Thu, 27 Jul 2006 18:06:39 -0300 Subject: [asterisk-users] Getting no Audio with G729> Hello,Bonjour.> Recently I purchased g729 codec and installed in Tribox 1.1(upgraded 1.1.1)/ > Asterisk. I have pointed a DID from my carrier via SIP through g729 to > asterisk. Problem is I am not getting any audio even though I am getting > DTMF in asterisk. I am trying to run A2billing with asterisks.Are you behind NAT? what exactly is the callflow like for this? does the call come in and then you dial another phone? are you getting any strange messages on the Asterisk console? We're going to need some more information to track this down. Console output and a sip debug would be good.> Configuration of carrier is asterisk is: > [abc] > allow=g729 > context=c-DID > dtmfmode=auto > host=xxx.xxx.xxx.xxx > insecure=very > sendrpid=yes > type=friend > echo=no > > Any suggestions ?One final note, 'echo' is not a valid option.> Thanks > > >Joshua Colp Digium
Hello, Recently I purchased g729 codec and installed in Tribox 1.1(upgraded 1.1.1)/ Asterisk. I have pointed a DID from my carrier via SIP through g729 to asterisk. Problem is I am not getting any audio even though I am getting DTMF in asterisk. I am trying to run A2billing with asterisks. Configuration of carrier is asterisk is: [abc] allow=g729 context=c-DID dtmfmode=auto host=xxx.xxx.xxx.xxx insecure=very sendrpid=yes type=friend echo=no Any suggestions ? Thanks
Make sure the binary you downloaded MATCHES your machine. snip
Hi again, Asterisk was not behind the NAT and I downloaded correct platform of codec. I solved my problem by changing the prompts into G729 format. And it works fine now. Now I need to know about a utility which can convert all ulaw audio prompts into g729 prompts in bulk. Or is there any was Asterisk can convert ulaw prompts to G729 prompts by itself during call. Thanks , -----Original Message----- From: Wasif [mailto:wasif@thecommstore.com] Sent: Thursday, July 27, 2006 5:07 PM To: 'asterisk-users@lists.digium.com' Subject: Getting no Audio with G729 Hello, Recently I purchased g729 codec and installed in Tribox 1.1(upgraded 1.1.1)/ Asterisk. I have pointed a DID from my carrier via SIP through g729 to asterisk. Problem is I am not getting any audio even though I am getting DTMF in asterisk. I am trying to run A2billing with asterisks. Configuration of carrier is asterisk is: [abc] allow=g729 context=c-DID dtmfmode=auto host=xxx.xxx.xxx.xxx insecure=very sendrpid=yes type=friend echo=no Any suggestions ? Thanks
On Jul 27, 2006, at 2:06 PM, Wasif wrote:> Hello, > > Recently I purchased g729 codec and installed in Tribox 1.1 > (upgraded 1.1.1)/ > Asterisk. I have pointed a DID from my carrier via SIP through g729 to > asterisk. Problem is I am not getting any audio even though I am > getting > DTMF in asterisk. I am trying to run A2billing with asterisks. > > Configuration of carrier is asterisk is: > [abc] > allow=g729 > context=c-DID > dtmfmode=auto > host=xxx.xxx.xxx.xxx > insecure=very > sendrpid=yes > type=friend > echo=noMake sure that the port 10000-20000 are open at your firewall? That is where the audio is being transmitted during an SIP call (usually). Marty
Here is what I've answered to a similar thread, I guess that's the same problem : """ Hi, I had exactly the same problem with trixbox and asterisk 1.2.11. That looks to be a bug in this release of asterisk. When using one channel with one license, I had the message "Out of G.729 Encoder Licenses!" (in /var/log/asterisk/full). And once the call finished, the command 'show g729' indicates the licence is still in use (but there is no active channel ...). I've upgraded to zaptel-1.9.1 and asterisk 1.2.12.1 and I have no more problem ! Benoit """ Wasif wrote:> Hello, > > Recently I purchased g729 codec and installed in Tribox 1.1(upgraded 1.1.1)/ > Asterisk. I have pointed a DID from my carrier via SIP through g729 to > asterisk. Problem is I am not getting any audio even though I am getting > DTMF in asterisk. I am trying to run A2billing with asterisks. > > Configuration of carrier is asterisk is: > [abc] > allow=g729 > context=c-DID > dtmfmode=auto > host=xxx.xxx.xxx.xxx > insecure=very > sendrpid=yes > type=friend > echo=no > > Any suggestions ? > > Thanks > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > >-- Beno?t M?rouze _._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._. Groupe IPercom - The VoIP Enabling Company - http://www.ipercom.com Ing?nieur R&D - courriel : benoit.merouze@ipercom.com Network Software Developer - mailto: benoit.merouze@ipercom.com T?l. / Phone : +33 1 7269 9611 ._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._ Si?ge Social 43, rue Fessart 92100 Boulogne Billancourt RCS NANTERRE B 440 345 528 - Capital social: 100 000 ? CE COURRIEL COMME LES DOCUMENTS EVENTUELLEMENT ASSOCIES SONT CONFIDENTIELS & COUVERTS PAR LE SECRET PROFESSIONNEL THIS E MAIL AND ANY DOCUMENT POSSIBLY ATTACHED ARE CONFIDENTIAL AND COVERED BY THE PROFESSIONAL SECRECY ._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._._ "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety." Benjamin Franklin