asterisk users - Jul 2006 - gxp-2000 configure line appearances

Can anyone tell me how to configure the grandstream gxp-2000 for 4 line
apearances.  I have the the sample conf from the website and the phone
is getting its config from my TFTP server. But it does not have any info
for the other line apearance butons 

The real thing that would help is a complete list of the configurable
comands on the latest firmware so I can create the config file.


# Admin password for web interface
P2 = 
# SIP Server
P47 = 
# Outbound Proxy
P48 = 
# SIP User ID
P35 = 


Any help would be great.

Hello Cavanna,,

* Cavanna, Richard <RCavanna@sychip.com> [27-07-06
15:59]:
> The real thing that would help is a complete list of the configurable
> comands on the latest firmware so I can create the config file.
try that config file, works perfectly for me.

Best regards,
Matthias

-- 

"Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the universe trying to
produce bigger and better idiots. So far, the universe is winning." --
Rich Cook
-------------- next part --------------


################################################################################################
## Configuration template for GXP-2000 firmware version 1.0.2.13
################################################################################################

##############################################################################
##  Advanced/System-wide Options
##############################################################################

# Admin password for web interface
P2 = admin

# Silence Suppression. 0 - no, 1 - yes
P50 = 1

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs
respectively)
P37 = 2

# Layer 3 QoS (IP Diff-Serv or Precedence value for RTP)
P38 = 48

# Layer 2 QoS. 802.1Q/VLAN Tag (VLAN classification for RTP)
P51 = 0

# Layer 2 QoS. 802.1p priority value (0 - 7)
P87 = 0

# No Key Entry Timeout. Default - 4 seconds.
P85 = 4

# Use # as Dial Key (if set to Yes, "#" will function as the
"(Re-)Dial" key). 0 - no, 1 - yes
P72 = 1

# Local RTP port (1024-65535, default 5004)
P39 = 5004 

# Use Random Port. 0 - no, 1 - yes
P78 = 0

# Keep-alive interval (in seconds. default 20 seconds)
P84 = 20

# Use NAT IP.  This will enable our SIP client to use this IP in the SIP
message. Example 64.3.153.50.
P101 
# STUN server
P76 = 

#-------------------------------------------------------------
# Firmware Upgrade 
#-------------------------------------------------------------

# Firmware Upgrade. 0 - TFTP Upgrade,  1 - HTTP Upgrade.
P212 = 0

# Firmware Server Path
P192 = 192.168.0.251

# Config Server Path
P237 = 192.168.0.251

# Firmware File Prefix
P232 
# Firmware File Postfix
P233 
# Config File Prefix
P234 
# Config File Postfix
P235 
# Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured provision path and method.
P145 = 0

# Automatic Upgrade. 0 - No, 1 - Yes (checking every defined days). Default is
No.
P194 = 1

# Check for new firmware every () minutes, unit is in minute, default is 7 days.
P193 = 10080

# Use firmware pre/postfix to determine if f/w is required
# 0 = Always Check for New Firmware 
# 1 = Check New Firmware only when F/W pre/suffix changes 
P238 = 0

# DTMF Payload Type
P79 = 101

# Syslog Server (name of the server, max length is 64 charactors)
P207 = 192.168.0.251

# Syslog Level (Default setting is NONE)
# 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR
P208 = 0

# NTP Server
P30 = 192.168.0.251

# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is No.
# When set to Yes(1), it will override the configured NTP server.
P144 = 0

# Distinctive Ring Tone
# Use custom ring tone 1 if incoming caller ID is the following:
P105 
# Use custom ring tone 2 if incoming caller ID is the following:
P106 
# Use custom ring tone 3 if incoming caller ID is the following:
P107 
# Disable Call Waiting. 0 - no, 1 - yes
P91 = 0

# Lock Keypad Update. 0 - no, 1 - yes
P88 = 0

####################################################################
# Primary Account (Account 1) Settings
####################################################################

# Account Active (In Use). 0 - no, 1 - yes
P271 = 1

# Account Name
P270 
# SIP Server
P47 = sip.mycompany.com

# Outbound Proxy
P48 = proxy.mycompany.com

# SIP User ID
P35 = 8000

# Authenticate ID
P36 = 8000

# Authenticate password
P34 = 0000

# Display Name (John Doe)
P3 = 

# Use DNS SRV. 0 - No, 1 - Yes.
P103 = 0

# SIP User ID is phone number. 0 - no, 1 - yes
P63 = 0

# SIP Registration. 0 - no, 1 - yes
P31 = 1

# Unregister On Reboot. 0 - no, 1 - yes
P81 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P32 = 60

# Local SIP port (default 5060)
P40 = 5060

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P209 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P250 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P52 = 0

# SUBSCRIBE for MWI. (Whether or not send SUBSCRIBE for Message Waiting
Indication) 0 - No, 1 - Yes.
P99 = 1

# Proxy-Require (A SIP extension to enable firewall penetration)
P197 
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P33 = 88

# Send DTMF. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P73 = 2

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - no,
1 - yes
P29 = 0

# Dial Plan Prefix (dial plan prefix string).
P66 
# Enable Call Features.  0 - no, 1 - yes
P191 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P182 = 0

# Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)
P260 = 180

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P261 = 90

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P262 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P263 = 0

# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P264 = 0

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P265 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P266 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P267 = 1

# Enable 100rel. 0 - no, 1 - yes
P272 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P104 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - no, 1 - yes
P65 = 0

# Auto Answer. 0 - no, 1 - yes
P90 = 0

# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P298 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P299 = 1

# Special Feature.    100 - Standard, 101 - Nortel MCS, 109 - RNK.
P198 = 100

#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P57 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P58 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P59 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P60 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P61 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P62 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P46 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P98 = 0

########################################################################
# SIP Account 2 Settings
########################################################################

# Account Active (In Use). 0 - no, 1 - yes
P401 = 0

#Account Name
P417 = 

# SIP Server
P402 
# Outbound Proxy Server
P403 
# Account 2 SIP User ID
P404 
# Authenticate ID
P405 
# Authenticate Password
P406 
# Display Name (John Doe)
P407 
# Use DNS SRV. 0 - No, 1 - Yes.
P408 = 0

# User ID is phone number; "user=phone". 0 - no, 1 - yes
P409 = 0

# SIP Registration. 0 - no, 1 - yes
P410 = 1

# Unregister on Reboot. 0 - no, 1 - yes
P411 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P412 = 60

# SIP Local port (default 5062)
P413 = 5062

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P440 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P441 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P414 = 0

# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication)
0 - No, 1 - Yes.
P415 = 0

# Proxy Require
P418 
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P426  
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P416 = 0
 
# Early Dial. 0 - no, 1 - yes
P422 = 0

# Dial Plan Prefix
P419 
# Enable Call Features. 0 - no, 1 - yes.
P420 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P442 = 0

# Default Session Expires (in seconds. default 180 seconds. Allowed value:
90-65535)
P434 = 180

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P427 = 90

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P428 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P429 = 0

# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P430 = 0

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P431 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P432 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P433 = 1

# Enable 100rel. 0 - no, 1 - yes
P435 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P423 = 0

# Send Anonymous. 0 - no, 1 - yes
P421 = 0

# Auto Answer. 0 - no, 1 - yes.
P425 = 0

# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P438 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P439 = 0

# Special Feature.    100 - Standard, 101 - Nortel MCS.
P424 = 100

#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P451 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P452 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P453 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P454 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P455 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P456 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P457 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P458 = 0

########################################################################
# SIP Account 3 Settings
########################################################################

# Account Active (In Use). 0 - no, 1 - yes
P501 = 0

# Account Name
P517 
# SIP Server
P502 
# Outbound Proxy Server
P503 
# SIP User ID
P504 
# Authenticate ID
P505 
# Authenticate Password
P506 
# Display Name (John Doe)
P507 
# Use DNS SRV. 0 - No, 1 - Yes.
P508 = 0

# User ID is phone. "user=phone". 0 - no, 1 - yes
P509 = 0

# SIP Registration. 0 - no, 1 - yes
P510 = 1

# Unregister on Reboot. 0 - no, 1 - yes
P511= 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P512 = 60

# SIP Local port (default 5064)
P513 = 5064

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P540 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P541 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P514 = 1

# Subscribe MWI. (Whether or not send SUBSCRIBE for Message Waiting Indication)
0 - no, 1 - yes
P515 = 0

# Proxy Require
P518 
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P526  
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P516 = 0

# Early Dial. 0 - no, 1 - yes
P522 = 0

# Dial Plan Prefix
P519 
# Enable Call Features. 0 - no, 1 - yes.
P520 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P542 = 0

# Default Session Expires (in seconds. default 180 seconds. Allowed value:
90-65535)
P534 = 180

# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P527 = 90

# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P528 
# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P529 
# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P530 
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P531 
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P532 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P533 = 1

# Enable 100rel. 0 - no, 1 - yes
P535 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P523 = 0

# Send Anonymous
P521 
# Auto Answer. 0 - no, 1 - yes.
P525 = 0
 
# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P538 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P539 = 0

# Special Feature.    100 - Standard, 101 - Nortel MCS.
P524 = 100

#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P551 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P552 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P553 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P554 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P555 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P556 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P557 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P558 = 0

########################################################################
# SIP Account 4 Settings
########################################################################

# Account Active (In Use). 0 - no, 1 - yes
P601 = 0

#Account Name
P617 = 

# SIP Server
P602 
# Outbound Proxy Server
P603 
# SIP User ID
P604 
# Authenticate ID
P605 
# Authenticate Password
P606 
# Display Name (John Doe)
P607 
# Use DNS SRV. 0 - no, 1 - yes.
P608 = 0

# User ID is phone number. "user=phone". 0 - no, 1 - yes
P609 = 0

# SIP Registration. 0 - no, 1 - yes
P610 = 1

# Unregister on Reboot. 0 - no, 1 - yes
P611 = 0

# Register Expiration (in minutes. default 1 hour, max 45 days)
P612 = 60

# SIP Local port (default 5066)
P613 = 5066

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)
# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default 100.
P640 = 100

# SIP T2 Interval. RFC 3261 T2 value. The maximum retransmit interval for
non-INVITE requests and INVITE responses.
# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 400.
P641 = 400

# NAT Traversal. 0 - yes, 1 - no, 2 - No, but send keep-alive
P614 = 1

# Subscribe MWI. Whether or not send SUBSCRIBE for Message Waiting Indication. 
0 - no, 1 - yes
P615 = 0

# Proxy Require
P618 
# Voice Mail UserID (User ID/extension for 3rd party voice mail system)
P626  
# Send DTMF method. 0 - in audio, 1 - via RTP, 2 - via SIP INFO
P616 = 0

# Early Dial. 0 - no, 1 - yes
P622 = 0

# Dial Plan Prefix
P619 
# Enable Call Features. 0 - no, 1 - yes.
P620 = 1

# Disable Missed-Call (Missed calls will not be logged if set to Yes). 0 - no, 1
- yes
P642 = 0

# Default Session Expires (in seconds. default 180 seconds. Allowed value:
90-65535)
P634 
# Minimum SE (in seconds. default 90 seconds, must be lower than or equal to
P260)
P627 
# Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes
P628 
# Callee Request Timer (Request for timer when called. i.e. if remote party
supports timer but did not request for one) 0 - no, 1 - yes
P629 
# Force Timer (Still use timer when remote party does not support timer) 0 - no,
1 - yes
P630 
# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote
party supports UPDATE) 0 - no, 1 - yes
P631 
# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS
P632 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS
P633 = 1

# Enable 100rel. 0 - no, 1 - yes
P635 = 0

# Account Ring Tone. 0 - system ring tone, 1 - custom ring tone 1, 2 - custom
ring tone 2
# 3 - custom ring tone 3.
P623 = 0

# Send Anonymous. 0 - no, 1 - yes
P621 = 0

# Auto Answer. 0 - no, 1 - yes.
P625 = 0

# Allow Auto Answer by Call-Info. 0 - no, 1 - yes
P638 = 0

# Turn off speaker on remote disconnect. 0 - no, 1 - yes
P639 = 0

# Special Feature.  100 - Standard, 101 - Nortel MCS.
P624 = 100
 
#-----------------------------------------------------------------------------
# Codec/Voice Quality settings
#-----------------------------------------------------------------------------

# First codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P651 = 0

# Second codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P652 = 3

# Third codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P653 = 4

# Forth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P654 = 8

# Fifth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P655 = 18

# Sixth codec.   0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P656 = 0

# Seventh codec. 0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P657 = 0

# Eighth codec.  0 - PCMU, 2 - G.726-32, 3 - GSM, 4 - G.723.1, 8 - PCMA, 9 -
G.722 (wide band), 18 - G.729A/B
P658 = 0

################################################################################
# End User Settings. Please do not edit this section.
################################################################################

# End User Password
#P196 = 123

# DHCP support. 0 - yes, 1 - no
#P8 = 0

# PPPoE support. PPPoE user ID
#P82 
# PPPoE password
#P83 
# Host name, DHCP option 12. Max length allowed is 32 bytes.
P146 
# Domain name, DHCP option 15. Max length allowed is 32 bytes.
P147 
# Vendor Class ID, DHCP option 60. Max length allowed is 32 bytes.
P148 = 

# IP Address. Ignore if DHCP or PPPoE is used
#P9 = 192
#P10 = 168
#P11 = 0
#P12 = 1

# Subnet mask. Ignore if DHCP or PPPoE is used
#P13 = 255
#P14 = 255
#P15 = 255
#P16 = 0

# Router. Ignore if DHCP or PPPoE is used
#P17 = 192
#P18 = 168
#P19 = 1
#P20 = 1

# Use this DNS server.  (if specified).
#P92 = 192
#P93 = 168
#P94 = 0
#P95 = 2

# DNS 1. Ignore if DHCP or PPPoE is used
#P21 = 192
#P22 = 168
#P23 = 0
#P24 = 1

# DNS 2. Ignore if DHCP or PPPoE is used
#P25 = 0
#P26 = 0
#P27 = 0
#P28 = 0

#--------------------------------------------------------------------------
# End User Multi Purpose Keys
#-------------------------------------------------------------------------- 

# Multi Purpose Key 1 
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P323 
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P301 
# Name
P302 
# UserID
P303 
# Multi Purpose Key 2
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P324 
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P304 
# Name
P305 
# UserID
P306 
# Multi Purpose Key 3
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P325 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P307 
# Name
P308 
# UserID
P309 
# Multi Purpose Key 4
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P326 
# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4  
P310 
# Name
P311 
# UserID
P312 
# Multi Purpose Key 5
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P327 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4
P313 
# Name
P314 
# UserID
P315 
# Multi Purpose Key 6
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P328 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 
P316 
# Name
P317 
# UserID
P318 
# Multi Purpose Key 7
# ------------------------------------------
# Key Mode. 0 - Speed Dial, 1 - Asterisk BLF
P329 = 

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 
P319 
# Name
P320 
# UserID
P321 
#-----------------------------------------------------------------------------
# End User Time settings
#-----------------------------------------------------------------------------

# Time Zone. Offset in minutes to GMT
P64 = 780

# Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes.
# When set to Yes(1), it will override the configured Time Zone setting if
available.
P143 = 0

# Daylight Savings Time. 0 - no, 1 - yes
P75 = 1

# LCD Backlight Always On. 0 - no, 1 - yes
P322 = 0

# Time Display Format. 0 - 12 Hour, 1 - 24 Hour
P122 = 1

# Date Display Format. 0 - Year-Month-Day, 1 - Month-Day-Year, 2 -
Day-Month-Year
P102 = 2

# Display Clock instead of Date. 0 - no, 1 - yes
P123 = 0

# Device Mode. 0 - Switch, 1 - NAT/Router. Default is 0.
P231 = 0

# WAN side http access.  0 - Disable(default), 1 - Yes.
P190 = 0

# Reply to ICMP on WAN port. 0 - No, 1 - Yes. Unit will not respond to PING from
WAN side if set to No.
P189 = 0

#Cloned WAN MAC Address.
#P115 #P116 #P117 #P118 #P119 #P120 
#LAN Subnet Mask.  Default is 255.255.255.0.
#P110 = 

#LAN Base/Gateway/Router IP for the LAN port, default is 192.168.2.1.
#P111 = 

#DHCP IP Lease Time, in units of hours, default is 120 hours or 5 days.
#P112 = 120

#DMZ IP.
#P113 
#-----------------------------------------------------------
# Port Forwarding Settings.
#-----------------------------------------------------------

#############  Choice 1 ####################################
# WAN Port
P150 # LAN IP
P158 # LAN Port
P166 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P174 #############  Choice 2 ####################################
# WAN Port
P151 # LAN IP
P159 # LAN Port
P167 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P175 #############  Choice 3 ####################################
# WAN Port
P152 # LAN IP
P160 # LAN Port
P168 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P176 #############  Choice 4 ####################################
# WAN Port
P153 # LAN IP
P161 # LAN Port
P169 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P177 #############  Choice 5 ####################################
# WAN Port
P154 # LAN IP
P162 # LAN Port
P170 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P178 #############  Choice 6 ####################################
# WAN Port
P155 # LAN IP
P163 # LAN Port
P171 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P179 #############  Choice 7 ####################################
# WAN Port
P156 # LAN IP
P164 # LAN Port
P172 # Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P180 #############  Choice 8 ####################################
# WAN Port
P157 = 
# LAN IP
P165 = 
# LAN Port
P173 = 
# Protocol.  0 - UDP Only, 1 - TCP Only, 2 - TCP and UDP.
P181 =

Thanks this was exactly what I was looking for.  

Thanks

Richard