Create yourself a crossover cable and loop the spans, set one to provide
clock and you should quickly see them come up, this will provide a very
basic test of hardware.
Steve
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Julian
Lyndon-Smith
Sent: 16 June 2006 10:20
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] sangoma card test
Is there any way of running a diagnostic on a Sangoma A102 card ? Our
lines have gone down and I want to avoid the usual BT "It must be your
equipment" line with technical proof.
At the moment I have a BLUE/RED alarm on zap show status
Julian.
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
The information contained in this email is intended for the personal and
confidential use
of the addressee only. It may also be privileged information. If you are not the
intended
recipient then you are hereby notified that you have received this document in
error and
that any review, distribution or copying of this document is strictly
prohibited. If you have
received this communication in error, please notify Brendata immediately on:
+44 (0)1268 466100, or email 'technical@brendata.co.uk'
Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX UK
Registered Office as above. Registered in England No. 2764339
See our current vacancies at www.brendata.co.uk