Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone. Regards lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of picciuX Sent: 24 May 2006 10:49 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] GXP2k and BLF problem asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of asterisk. In this case, have to wait until phone re-registers and re-subscribe for BLFs... 2006/5/24, asterisk <asterisk@zinix.co.uk>: Hi, Is anyone else having problems with the Grandstream GXP2000 BLF? When I restart * the status lights stop working but the buttons still work as one touch dials and call the correct number. The only way I cen get the lights working again is to reset to factory default and re-build the config. I am running I upgraded the firmware to 1.1.0.13 but still have the same problem. Any ideas ? Fadge _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/63a38052/attachment.htm
It does not happen with a reload of asterisk but when the server is rebooted. I have set the register timeout to 1 min but this has no effect. The BLF still does not work. The * is V 1.2.7.1. I can see the phone register first time when phone reboots and would expect to see it re-register every 1 min on the console if I understand things correctly, but it does not. Fadge _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: 24 May 2006 11:30 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] GXP2k and BLF problem Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone. Regards lee _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of picciuX Sent: 24 May 2006 10:49 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] GXP2k and BLF problem asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of asterisk. In this case, have to wait until phone re-registers and re-subscribe for BLFs... 2006/5/24, asterisk <asterisk@zinix.co.uk>: Hi, Is anyone else having problems with the Grandstream GXP2000 BLF? When I restart * the status lights stop working but the buttons still work as one touch dials and call the correct number. The only way I cen get the lights working again is to reset to factory default and re-build the config. I am running I upgraded the firmware to 1.1.0.13 but still have the same problem. Any ideas ? Fadge _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/da8f8517/attachment.htm
Are the GXP's configured properly for BLF and what does show hints print? Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk Sent: 24 May 2006 11:57 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] GXP2k and BLF problem It does not happen with a reload of asterisk but when the server is rebooted. I have set the register timeout to 1 min but this has no effect. The BLF still does not work. The * is V 1.2.7.1. I can see the phone register first time when phone reboots and would expect to see it re-register every 1 min on the console if I understand things correctly, but it does not. Fadge ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: 24 May 2006 11:30 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] GXP2k and BLF problem Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone. Regards lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of picciuX Sent: 24 May 2006 10:49 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] GXP2k and BLF problem asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of asterisk. In this case, have to wait until phone re-registers and re-subscribe for BLFs... 2006/5/24, asterisk <asterisk@zinix.co.uk>: Hi, Is anyone else having problems with the Grandstream GXP2000 BLF? When I restart * the status lights stop working but the buttons still work as one touch dials and call the correct number. The only way I cen get the lights working again is to reset to factory default and re-build the config. I am running I upgraded the firmware to 1.1.0.13 but still have the same problem. Any ideas ? Fadge _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/f490cc1f/attachment.htm
I run 1.1.0.13 on my GXP's and after stopping and starting the server I either wait for the phones to re-reg or I reboot the phones. After restarting asterisk does rebooting the phones does fix the problem? Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk Sent: 24 May 2006 12:25 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] GXP2k and BLF problem Phones are configured for "asterisk BLF" . Like I said, the config works when the phone is defaulted and rebuilt but stops working if the server is rebooted. Show hints Gives: -= Registered Asterisk Dial Plan Hints =- 310 : SIP/310 State:Unavailable Watchers 0 305 : SIP/305 State:Idle Watchers 0 304 : SIP/304 State:Idle Watchers 0 303 : SIP/303 State:Idle Watchers 0 302 : SIP/302 State:Idle Watchers 0 301 : SIP/301 State:Unavailable Watchers 0 ---------------- - 6 hints registered Thanks fadge ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: 24 May 2006 12:01 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] GXP2k and BLF problem Are the GXP's configured properly for BLF and what does show hints print? Lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk Sent: 24 May 2006 11:57 To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] GXP2k and BLF problem It does not happen with a reload of asterisk but when the server is rebooted. I have set the register timeout to 1 min but this has no effect. The BLF still does not work. The * is V 1.2.7.1. I can see the phone register first time when phone reboots and would expect to see it re-register every 1 min on the console if I understand things correctly, but it does not. Fadge ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer Sent: 24 May 2006 11:30 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [Asterisk-Users] GXP2k and BLF problem Stopping and restarting Asterisk will lose the hints, then you will have to wait until the phone registers again. With 1.2.7.1 a reload shouldn't lose anything. Change the register time on the phones to something less that 60 minutes if it's a big problem. Instead of factory defaulting the phones you might find a simple restart will re-register the phone and BLF will work on the phone. Regards lee ________________________________ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of picciuX Sent: 24 May 2006 10:49 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] GXP2k and BLF problem asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of asterisk. In this case, have to wait until phone re-registers and re-subscribe for BLFs... 2006/5/24, asterisk <asterisk@zinix.co.uk>: Hi, Is anyone else having problems with the Grandstream GXP2000 BLF? When I restart * the status lights stop working but the buttons still work as one touch dials and call the correct number. The only way I cen get the lights working again is to reset to factory default and re-build the config. I am running I upgraded the firmware to 1.1.0.13 but still have the same problem. Any ideas ? Fadge _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ ########################################### This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange. For more information, connect to http://www.f-secure.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/55290601/attachment.htm
Are you using preconfiged scripts? If so what happens if you manually
config the phone then restart asterisk and then the phone?
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 12:56
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
No,
Rebooting the phones does not fix the problem. As previously
stated the only way to get them working again is to default the config
of the phone and rebuild.
Fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:41
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
I run 1.1.0.13 on my GXP's and after stopping and starting the server I
either wait for the phones to re-reg or I reboot the phones. After
restarting asterisk does rebooting the phones does fix the problem?
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 12:25
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Phones are configured for "asterisk BLF" . Like I said, the config
works
when the phone is defaulted and rebuilt but stops working if the server
is rebooted. Show hints Gives:
-= Registered Asterisk Dial Plan Hints =-
310 : SIP/310 State:Unavailable
Watchers 0
305 : SIP/305 State:Idle
Watchers 0
304 : SIP/304 State:Idle
Watchers 0
303 : SIP/303 State:Idle
Watchers 0
302 : SIP/302 State:Idle
Watchers 0
301 : SIP/301 State:Unavailable
Watchers 0
----------------
- 6 hints registered
Thanks
fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:01
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Are the GXP's configured properly for BLF and what does show hints
print?
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 11:57
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
It does not happen with a reload of asterisk but when the server is
rebooted. I have set the register timeout to 1 min but this has no
effect. The BLF still does not work. The * is V 1.2.7.1. I can see the
phone register first time when phone reboots and would expect to see it
re-register every 1 min on the console if I understand things correctly,
but it does not.
Fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 11:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Stopping and restarting Asterisk will lose the hints, then you will have
to wait until the phone registers again. With 1.2.7.1 a reload
shouldn't lose anything. Change the register time on the phones to
something less that 60 minutes if it's a big problem. Instead of
factory defaulting the phones you might find a simple restart will
re-register the phone and BLF will work on the phone.
Regards
lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem
asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of
asterisk. In this case, have to wait until phone re-registers and
re-subscribe for BLFs...
2006/5/24, asterisk <asterisk@zinix.co.uk>:
Hi,
Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as
one
touch dials and call the correct number. The only way I cen get the
lights
working again is to reset to factory default and re-build the config.
I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.
Any ideas ?
Fadge
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/e4220724/attachment.htm
Think you need to contact Grandstream support then. I've got the same
version of * and GXP fw and I get no problems. Sorry I can't help you
any further.
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 13:30
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Phone is manually configured through web interface.
Thanks to all those who are helping with this.
Fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 13:18
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Are you using preconfiged scripts? If so what happens if you manually
config the phone then restart asterisk and then the phone?
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 12:56
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
No,
Rebooting the phones does not fix the problem. As previously
stated the only way to get them working again is to default the config
of the phone and rebuild.
Fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:41
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
I run 1.1.0.13 on my GXP's and after stopping and starting the server I
either wait for the phones to re-reg or I reboot the phones. After
restarting asterisk does rebooting the phones does fix the problem?
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 12:25
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Phones are configured for "asterisk BLF" . Like I said, the config
works
when the phone is defaulted and rebuilt but stops working if the server
is rebooted. Show hints Gives:
-= Registered Asterisk Dial Plan Hints =-
310 : SIP/310 State:Unavailable
Watchers 0
305 : SIP/305 State:Idle
Watchers 0
304 : SIP/304 State:Idle
Watchers 0
303 : SIP/303 State:Idle
Watchers 0
302 : SIP/302 State:Idle
Watchers 0
301 : SIP/301 State:Unavailable
Watchers 0
----------------
- 6 hints registered
Thanks
fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 12:01
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Are the GXP's configured properly for BLF and what does show hints
print?
Lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of asterisk
Sent: 24 May 2006 11:57
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
It does not happen with a reload of asterisk but when the server is
rebooted. I have set the register timeout to 1 min but this has no
effect. The BLF still does not work. The * is V 1.2.7.1. I can see the
phone register first time when phone reboots and would expect to see it
re-register every 1 min on the console if I understand things correctly,
but it does not.
Fadge
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lee Archer
Sent: 24 May 2006 11:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] GXP2k and BLF problem
Stopping and restarting Asterisk will lose the hints, then you will have
to wait until the phone registers again. With 1.2.7.1 a reload
shouldn't lose anything. Change the register time on the phones to
something less that 60 minutes if it's a big problem. Instead of
factory defaulting the phones you might find a simple restart will
re-register the phone and BLF will work on the phone.
Regards
lee
________________________________
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of picciuX
Sent: 24 May 2006 10:49
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] GXP2k and BLF problem
asterisk version? until 1.2.7.1, sip subscriptions get lost on reload of
asterisk. In this case, have to wait until phone re-registers and
re-subscribe for BLFs...
2006/5/24, asterisk <asterisk@zinix.co.uk>:
Hi,
Is anyone else having problems with the Grandstream GXP2000 BLF? When I
restart * the status lights stop working but the buttons still work as
one
touch dials and call the correct number. The only way I cen get the
lights
working again is to reset to factory default and re-build the config.
I am running I upgraded the firmware to 1.1.0.13 but still have the same
problem.
Any ideas ?
Fadge
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/
###########################################
This message has been scanned by F-Secure Anti-Virus for Microsoft Exchange.
For more information, connect to http://www.f-secure.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060524/507f6d86/attachment.htm