similar to: GXP2k and BLF problem

Version - Asterisk SVN-trunk-r12793M (1.2.4) I have 4 Grandstream GXP 2000 phones configured. However at the moment, I have had to disable BLF, Hints, and Call Limiting due to an extremely annoying bug which seems to make the phones channels "lock" in busy after a call has been hungup. If I do a show hints after say extension 200 has hung up I get the following -= Registered

In testing Asterisk 11, I've found that Asterisk doesn't seem to be sending BLF updates to SIP peers that have subscribed to a hint looking at a Custom device if that Custom device state is RINGING or RING_INUSE. All other states seem to be working correctly. The hint section of the dialplan is: [hints] exten => _3XX,hint,Custom:${EXTEN} Console shows the following for core show

I am trying to set up the BLF on a GXP2000. Currently what I have is extensions.conf: [globals] polycom430=SIP/101 [internal] exten => 101,1,Macro(voicemail,${polycom430}) [macro-voicemail] exten => s,1,Dial(${ARG1},10,tT) exten => s,2,VoiceMail(u${MACRO_EXTEN}@default ) exten => s,102,VoiceMail(b${MACRO_EXTEN}@default) [ext-local-custom] exten => 101,hint,${polycom430}

Hello, I configured both asterisk and grandstream 2000 accourding to howtos on the web.. And everything seems working fin. But if i reload asterisk grandstream stops working with BLF. I need to restart the phone to enable BLF again. Any clues??

I've installed Grandstream GPX-2000 phones and have successfully enabled one of my buttons to use Asterisk BLF for an extension. I can tell when this extension is available, is being rung, or is on the line. I'd like to do the same for my Zaptel channels, to be able to see when a line is onhook, ringing or offhook. I tried the following but alas, it doesn't seem to be working:

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

I'm using a few GXP-2000 with firmware 1.0.2.13 and everything seems to be working fine. However, there are a couple of issues I'd like to know if are possible: 1) Even though the phone has 4 line appearances, if I am speaking on a line, the phone can no longer receive phone calls. I can manually select another line and make calls, but when Asterisk tries to send a call to it, I

Hi all, I am working on asterisk 1.2.18 zaptel 1.2.17 Polycom 650 polycom 430 SIP version 2.0.3.0131 for IP 650 SIP version for IP430 2.0.3.0127 freepbx 2.2.1 I am trying to configure BLF using asterisk but failed. I would be thankfull if somebody help me. Regards FArooq ********************************************** 1 ********************************************** in my

Hi all If I have the following in my dialplan: exten=>25001,hint,SIP/25001 Doing a core show hint 25001 results in 25001 at local : SIP/25001 State:Idle Watchers 0 1 hint matching extension 25001 in the Asterisk CLI. What does the Watchers 0 mean? I use the hints table output via core show hints for logic in my dialler application - but

I have two Asterisk Systems. One on of those, when I execute this: Dial("SIP/teleglobe-007931d0", "SIP/13033372500 at teleglobe|60|oL(4007520000:60000:30000)") ... It causes Asterisk to immediately read out the time limit of the call (66,792 minutes), as soon as the other end answers, even though we aren't down to 60s remaining yet. Asterisk then goes into an infinite

Ishfaq Malik <ish at pack-net.co.uk> schrieb: > The hints have to be in the same contexts in extensions.conf as defines in > the sip.conf subscribecontext which can be set per peer. Well, [anika_incoming] will be included in [default], of course... But I tried to define anika_incoming in subscribecontext, too. No changes... > Also, have you configured the phones as well? What do

After working with the Grandstream GXP 2000 series phones, I have decided that I am quite unhappy with their problems, both voice quality, volume, features and others. For their price now, there are plenty of phones to choose from as well. So subjectively what would be the best Hardphone for a small/medium business with multiple line support, BLF, etc. Are the Cisco 7960 the best of the

Ishfaq Malik <ish at pack-net.co.uk> schrieb: > BLF is an interaction between the phones and the server. You need to > configure function buttons on the phones to display the presence state of > individual peers that have been set up on the server. > > This command in the asterisk cli will help you: > > core show hints > > If you see an entry for the peer then

Hello, I'm trying to supervise an existing Voicemail box with a BLF button on Debian's asterisk 13.14.1 system. I mostly found this [1] document. I added in a context a line like: exten = *7000,hint,MWI:31 at default With "core show hints", I can read this: *7000 at subs : MWI:31 at default State:Unavailable Presence:not_set Watchers 1 My questions

Hello, I have some trouble with the BLF indicator. I have two phones that use the same hint: 13 => hint,1,SIP/phone13&SIP/phone13-wlan This works great from the asterisk side, but it seems the status change is too quick for the attached Grandstream-phones. When I ring the extension the hint changes to "Ringing". The Grandstream blinks. Great. Now, when someone picks up one of

Greetings list, We recently installed some Linksys SPA962 + SPA932 sidecars into a client's offices. The BLF functionality works fine, but call pickup using the BLF is something of an issue. Following the advice on voip-info.org, I configured part of their dialplan as follows: exten => _**2XX,1,Pickup(SIP/${EXTEN:2}) exten => _**2XX,n,Dial(SIP/${EXTEN:2},15,tw) exten =>

Hi, 1. How do you then, synced then unread message presence with custom device status ? From an external program ? When a user leaves VoiceMailMan application ? Using externnotify ? 2. What is MWI:101 at default expression for (see [2] ? Cheers [2] https://wiki.freepbx.org/display/FPG/Subscribe+a+BLF+button+to+Monitor+a+Voicemail+Box 2017-11-21 17:58 GMT+01:00 John Kiniston <johnkiniston at

I have meetme working with BLF on polycom phones however when meetme is not actually being used by anyone the 'status' of meetme becomes "idle". Which the Polycom phone sees and produces a clock symbol and FLASHING red LED. Are there any 'tricks' or work-arounds to change this status to something that does not blink the phone's LED making it look busy when meetme is

Hello Asterisk community, I'm trying to use BLF with Asterisk Realtime, i've been searching for some info but nothing seems to be clear, can anyone help me eith some ideas to make this work ok? I'va my dialplan with Realtime Thanks in advance -- Saludos Danny Dias SkypeID: danny.dias1

Man, I really feel stupid, but after banging my head on a brick wall for several hours ... I need help! I've gotten the BLF to work on my shiny new GXP2010. The GXP is exten 5707, and I've got an xlite on 5608. When I make a call from an outside line, I dial SIP/5608. The little blinky light on the GXP that's monitoring 5608 goes, well, "blink blink". :) I then press