Hi,
You have to modify the setup sent for the call outgoing...
Regards,
Tristan
Steffen Weinreich a ?crit :> Hi!
>
> For demonstration purposes I try to bridge an incoming video call from a
> 3G mobile handset to another 3G mobile handset using asterisk as
"switch".
>
> On the incoming call leg I see all expected bearer capabilities
> (Digital, 64k Transparent, G.7xx 384k video) but on the outgoing call
> leg the bearer capability G.7xx 384k video get lost and therefore the
> call is dropped from the mobile operator.
>
> What I have tried so far ist to use SetTransferCapability(VIDEO) but
> this does not change the behavior.
>
> Is there a way to set or preserve the bearer capability for the outgoing
> call leg?
>
> cheerio
> Steve
>
>
> --- environment
>
> pbx-test*CLI> show version
> Asterisk 1.2.9.1-BRIstuffed-0.3.0-PRE-1q built by root @
> pbx-test.bb.ic3s.de on a i686 running Linux on 2006-06-16 10:17:00 UTC
>
> with A Quad ZAP Pri Card
>
> ---- dialplan
>
> ;exten => 297,1,SetTransferCapability(VIDEO)
> exten => 297,1,Noop()
> exten => 297,2,Dial(${TRUNK}/0175234567)
> exten => 297,3,Hangup
> exten => 297,104,SetVar(PRI_CAUSE=17) ; Indicate Busy
> exten => 297,105,Hangup
>
> ---- Log
> pbx-test*CLI>
> == Primary D-Channel on span 2 down
> Oct 31 09:05:03 WARNING[6771]: chan_zap.c:2506 pri_find_dchan: No
> D-channels available! Using Primary channel 47 as D-channel anyway!
> 1 < Protocol Discriminator: Q.931 (8) len=45
> 1 < Call Ref: len= 2 (reference 25880/0x6518) (Originator)
> 1 < Message type: SETUP (5)
> 1 < [1 a11 ]
> 1 < Sending Complete (len= 1)
> 1 < [1 041 031 881 901 a61 ]
> 1 < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Unrestricted digital information (8)
> 1 < Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> 1 < Ext: 1 User information layer 1: G.7xx
> 384k Video (38)
> 1 < [1 181 031 a11 831 871 ]
> 1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> Preferred Dchan: 0
> 1 < ChanSel: Reserved
> 1 < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> 1 < Ext: 1 Channel: 7 ]
> 1 < [1 6c1 0c1 211 831 311 371 351 351 381 361 341 371 381
> 311 ]
> 1 < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> 1 < Presentation: Presentation allowed of
> network provided number (3) '1755864781' ]
> 1 < [1 701 081 c11 351 351 351 361 321 391 371 ]
> 1 < Called Number (len=10) [ Ext: 1 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '5556297' ]
> 1 < [1 7c1 031 881 901 a61 ]
> 1 < Low-layer compatibilty (len= 5) [ 1 0x88 1 0x90 1 0xA6 1 ]
> 1 -- Making new call for cr 25880
> 1 -- Processing Q.931 Call Setup
> 1 -- Processing IE 161 (cs0, Sending Complete)
> 1 -- Processing IE 4 (cs0, Bearer Capability)
> 1 -- Processing IE 24 (cs0, Channel Identification)
> 1 -- Processing IE 108 (cs0, Calling Party Number)
> 1 -- Processing IE 112 (cs0, Called Party Number)
> 1 -- Processing IE 124 (cs0, Low-layer Compatibility)
> Oct 31 09:05:07 WARNING[6770]: chan_zap.c:8503 zt_pri_error: 1 copying 5
> bytes LLC
> 1 > Protocol Discriminator: Q.931 (8) len=10
> 1 > Call Ref: len= 2 (reference 25880/0x6518) (Terminator)
> 1 > Message type: CALL PROCEEDING (2)
> 1 > [1 181 031 a91 831 871 ]
> 1 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> 1 > ChanSel: Reserved
> 1 > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> 1 > Ext: 1 Channel: 7 ]
> -- Accepting data call from '1755864781' to '5556297'
on channel
> 0/7, span 1
> -- Executing Macro("Zap/7-1", "handle-callerid") in
new stack
> -- Executing NoOp("Zap/7-1",
""01751234567"") in new stack
> -- Executing GotoIf("Zap/7-1", "0?3:5") in new
stack
> -- Goto (macro-handle-callerid,s,5)
> -- Executing SetCallerID("Zap/7-1", "001751234567")
in new stack
> -- Executing LookupCIDName("Zap/7-1", "") in new
stack
> -- Changed Caller*ID name to Testi Tester
> -- Executing NoOp("Zap/7-1", """Testi
Tester" <001751234567> / Testi
> Tester / 001751234567"") in new stack
> -- Executing Goto("Zap/7-1", "external-call|297|1")
in new stack
> -- Goto (external-call,297,1)
> -- Executing Dial("Zap/7-1", "Zap/r1/01752345678")
in new stack
> 1 -- Making new call for cr 32777
> -- Requested transfer capability: 0x08 - DIGITAL
> 1 > Protocol Discriminator: Q.931 (8) len=44
> 1 > Call Ref: len= 2 (reference 9/0x9) (Originator)
> 1 > Message type: SETUP (5)
> 1 > [1 041 021 881 901 ]
> 1 > Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Unrestricted digital information (8)
> 1 > Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> 1 > Ext: 0 User information layer 1:
> Unknown (24)
> 1 > [1 181 031 a91 831 881 ]
> 1 > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> 1 > ChanSel: Reserved
> 1 > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> 1 > Ext: 1 Channel: 8 ]
> 1 > [1 6c1 0e1 411 801 301 301 311 371 351 351 381 361 341
> 371 381 311 ]
> 1 > Calling Number (len=16) [ Ext: 0 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> 1 > Presentation: Presentation permitted, user
> number not screened (0) '001751234567' ]
> 1 > [1 701 0c1 c11 301 311 371 351 321 361 301 391 351 391
> 381 ]
> 1 > Called Number (len=14) [ Ext: 1 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '01752345678' ]
> -- Called r1/01752345678
> 1 < Protocol Discriminator: Q.931 (8) len=10
> 1 < Call Ref: len= 2 (reference 9/0x9) (Terminator)
> 1 < Message type: SETUP ACKNOWLEDGE (13)
> 1 < [1 181 031 a91 831 881 ]
> 1 < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> 1 < ChanSel: Reserved
> 1 < Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> 1 < Ext: 1 Channel: 8 ]
> 1 -- Processing IE 24 (cs0, Channel Identification)
> == Primary D-Channel on span 2 down
> Oct 31 09:05:08 WARNING[6771]: chan_zap.c:2506 pri_find_dchan: No
> D-channels available! Using Primary channel 47 as D-channel anyway!
> 1 < Protocol Discriminator: Q.931 (8) len=9
> 1 < Call Ref: len= 2 (reference 9/0x9) (Terminator)
> 1 < Message type: DISCONNECT (69)
> 1 < [1 081 021 841 b91 ]
> 1 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location: Public network serving the remote user (4)
> 1 < Ext: 1 Cause: Unknown (57), class = Service or
> Option not Available (3) ]
> 1 -- Processing IE 8 (cs0, Cause)
> -- Channel 0/8, span 1 got hangup request
> -- Channel 0/8, span 1 received AOC-E charging 0 units
> 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication,
> peerstate Disconnect Request
> 1 > Protocol Discriminator: Q.931 (8) len=9
> 1 > Call Ref: len= 2 (reference 9/0x9) (Originator)
> 1 > Message type: RELEASE (77)
> 1 > [1 081 021 811 b91 ]
> 1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location: Private network serving the local user (1)
> 1 > Ext: 1 Cause: Unknown (57), class = Service or
> Option not Available (3) ]
> -- Hungup 'Zap/8-1'
> == Everyone is busy/congested at this time (1:0/0/1)
> -- Executing SetVar("Zap/7-1", "PRI_CAUSE=17") in
new stack
> -- Executing Hangup("Zap/7-1", "") in new stack
> == Spawn extension (external-call, 297, 103) exited non-zero on
'Zap/7-1'
> 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Incoming Call
> Proceeding, peerstate Outgoing call Proceeding
> 1 > Protocol Discriminator: Q.931 (8) len=9
> 1 > Call Ref: len= 2 (reference 25880/0x6518) (Terminator)
> 1 > Message type: RELEASE COMPLETE (90)
> 1 > [1 081 021 801 911 ]
> 1 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
> Location: User (0)
> 1 > Ext: 1 Cause: User busy (17), class = Normal Event
> (1) ]
> 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> 1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> -- Hungup 'Zap/7-1'
> 1 < Protocol Discriminator: Q.931 (8) len=5
> 1 < Call Ref: len= 2 (reference 9/0x9) (Terminator)
> 1 < Message type: RELEASE COMPLETE (90)
> 1 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
> 1 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
> == Primary D-Channel on span 2 down
> Oct 31 09:05:13 WARNING[6771]: chan_zap.c:2506 pri_find_dchan: No
> D-channels available! Using Primary channel 47 as D-channel anyway!
> == Primary D-Channel on span 2 down
> Oct 31 09:05:18 WARNING[6771]: chan_zap.c:2506 pri_find_dchan: No
> D-channels available! Using Primary channel 47 as D-channel anyway!
> pbx-test*CLI> exit
> pbx-test:~#
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>