asterisk users - Mar 2006 - Re: Asterisk-Users Digest, Vol 20, Issue 226

That was how I reset the black Iaxy I have used; I've never used a blue one.

What I found was the initial provisioning would work fine, but if I
tried to change the settings after having already provisioned the
device, the provisioning program would hang, so I Googled for
instructions on resetting the Iaxy to the factory settings. This was the
procedure described at http://www.voip-info.org/wiki-IAXy . It *may* not
be necessary to go through all of these steps to reset it, but it worked
for me. YMMV...

After provisioning, the Iaxy works great; I'd recommend it to anyone
looking for an inexpensive, simple FXS.

--Mike
>Message: 9
>Date: Fri, 31 Mar 2006 09:05:45 -0900
>From: "Mojo with Horan & Company, LLC"
<mojo@horanappraisals.com>
>Subject: Re: [Asterisk-Users] IAXY codec support and questions..
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>	<asterisk-users@lists.digium.com>
>Message-ID: <442D6F79.7010905@horanappraisals.com>
>Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
>Really all that?  In my experience, which is admittedly only on the blue 
>iaxys and not the black ones, was just provision it, unplug power, 
>replug power.  The black one I have now I haven't had to re-provision 
>yet so this could be so on them....
>
>
>
>Michael Wallette wrote:
>  
>
>>> If you want to change
>>> settings on the Iaxy, you must reset it (press the
"reset" button on the
>>> back, hold it for ten seconds, unplug the RJ-11, RJ-45 and power
cables
>>> from the Iaxy while holding the reset button, then replace the
RJ-11,
>>> RJ-45 and power cables) before you can push the new config to the
Iaxy.
>>    
>>
>
>
>  
>