search for: replug

This patch series fixes the issue with unplug/replug of a port in virtio console device, which fails with an error "Error allocating inbufs\n". Patch 2 makes virtio packed ring code compatible with virtio split ring. Tested the packed ring code with the qemu virtio 1.1 device code posted here [1]. Changes from v1[2] ----- Make virtio pack...

This patch series fixes the issue with unplug/replug of a port in virtio console driver which fails with an error "Error allocating inbufs\n". Patch 1 updates the next avail index for packed ring code. Patch 2 makes use of 'virtqueue_detach_unused_buf' function to detach the unused buffers during port hotunplug time. Tested the pa...

This patch series fixes the issue with unplug/replug of a port in virtio console driver which fails with an error "Error allocating inbufs\n". Patch 1 makes use of 'virtqueue_detach_unused_buf' function to detach the unused buffers during port hotunplug time. Patch 2 updates the next avail index for packed ring code. Tested the pack...

iH have a TDM400 w/ 1 FXS & 1FXO card. after about a day or so the FXO stops working. after a reboot i get the following error. to get the card working again i have to shutdown, physically unplug/replug the card (reboot only, power off/on does not work) any ideas what may be going wrong here? thanks - hcir Zaptel Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Slaves: 02) 2 channels configured. ZT_CHAN...

...READ WRITE CKSUM usbpool ONLINE 0 0 0 mirror ONLINE 0 0 0 c7t0d0p0 ONLINE 0 0 0 c8t0d0p0 ONLINE 0 0 0 c9t0d0p0 ONLINE 0 0 0 i shut the machine down and replugged the USB HDDs to not use the USB hub but to connect directly to the machine. after booting the machine i have the following zpool status: state: DEGRADED NAME STATE READ WRITE CKSUM usbpool DEGRADED 0 0 0 mirror UNAVAIL 0 0...

Hi, guys, I have add devid support for EFI, (not putback yet) and test it with a zfs mirror, now the mirror can recover even a usb harddisk is unplugged and replugged into a different usb port. But there is still something need to improve. I''m far from zfs expert, correct me if I''m wrong. First, zfs should sense the hotplug event. I use zfs status to check the status of the pool. But it seems zfs does not received the hotplugged event so i...

I have successfully compiled NUT, and have noticed usb weirdness. The machine disconnected at 10:25 this morning tripplite was claiming 'stale data'. I noticed it this morning after trying to look at things. I 'replugged' the ups back into the usb port and it was fine. I am running 2.4.1, freebsd, tripplite Su2200XLA. I did notice that the usb cable was a little wobbly. Any other ways to see whats going on? here are a few of my log entries: Aug 13 10:25:27 igor upsd[920]: Data for UPS [tripplite] is stale...

The commit a7a69ec0d8e4 ("virtio_console: free buffers after reset") deffered detaching of unused buffer to virtio device unplug time. This causes unplug/replug of single port in virtio device with an error "Error allocating inbufs\n". As we don't free the unused buffers attached with the port. Re-plug the same port tries to allocate new buffers in virtqueue and results in this error if queue is full. This patch removes the unused...

The commit a7a69ec0d8e4 ("virtio_console: free buffers after reset") deffered detaching of unused buffer to virtio device unplug time. This causes unplug/replug of single port in virtio device with an error "Error allocating inbufs\n". As we don't free the unused buffers attached with the port. Re-plug the same port tries to allocate new buffers in virtqueue and results in this error if queue is full. This patch removes the unused...

Hi, I upgraded my 7.1-RELEASE system to RELENG_7 yesterday and after booting, re0 works for only a short time, then gives "re0: PHY read failed" over and over. Does anyone have a suggestion on how to debug? Thanks, Steve

...other words, what should I pay attention to when attempting to debug this?) - Very often, after * runs for a while, it stops recognizing incoming ISDN calls and refuses to send out ISDN calls. The funny thing is, restarting * or CAPI doesn't work - I have to shutdown both, unplug and replug the ISDN cable, and then after startup everything works again. At first, I thought that it might be a bad cable, so I taped down everything in order to prevent it from moving. This didn't help. I really do not understand why the thing with the cable is necessary. Any light that you can s...

...t stop * Stopping Network UPS Tools I haven't checked cabling, but AFAIK its still plugged in, but not sure if its usb or serial cabling. I'll check that once I get both eyes open simultaneously and report back. Found the cable, a D type usb, unplugged it and replugged it, and it appears now to be /dev/usb/hiddev3. dmesg, ever so helpful, and lsusb equally helpful, do not tell what the /dev/usbdevice is assigned to the newly discovered plugin. dmesg just reports: [136319.530160] usb 1-10: USB disconnect, device number 2 [136322.641716] usb 1-10: new low-s...

Hello, looking for replacements for some older Powerware equipment I found the MGE Pulsar Extreme 1000C and I'm currently testing one with nut-2.0.3 on a self-brewn i386-linux. Upto now everything seems to work fine - except I can't get the power outlets switching on again after mains returns. As this works with Personal Solution-Pac 2 on W2k I thought that there might be a way to

.../steph-081d9058 answered Zap/1-1 == Spawn extension (PSTN, s, 3) exited non-zero on 'Zap/1-1' -- Hungup 'Zap/1-1' stksrv02*CLI> But if the user drop the call before the SIP/steph answer, my zap channel seem to lost the connection and I need to remove the cable and replug it before it can accept incoming call from pstn Any idea why this? Is there a way asterisk can answer the call immediately rather than after 3 rings Regards Stephane -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/aster...

...ejecting I/O to dead device Buffer I/O error on device sdc1, logical block 0 lost page write due to I/O error on sdc1 EXT2-fs error (device sdc1): ext2_readdir: bad page in #2 If i unmount it and try to remount it it says sdc1 does not exist. I am not at the location so physically unplugging then replugging in the drive isn't a convenient option. How can I get the os to rescan the usb device so I can remount? thx bazooka

My new MGE Ellipse Premium 1200 is now working fine. I've tested pulling the plug and the computer shuts down properly and comes back up when I replug. The only strange behaviour is that when I put the power back on the battery shows as being at 86%. If it was at 86% it should have lasted longer. Is there any calibration step I can do? The only commands the ups seems to support are: $ upscmd -l mge1200@localhost Instant commands supported on UPS...

Hi! I've installed NUT 2.0.2 to work with my MGE Protection Center and it works but for one thing. When I reboot the computer, at startup upsdrvctl/newhidups can't find the UPS so I have to manually unplug, replug and start upsdrvctl/upsd every time. I've installed from sourcecode onto a Gentoo machine. Where should I look for the problem (USB/hotplug/newhidups/somewhere else)?

Dear all, (please Cc) I am running latest kernel (3.17-rc6) and I see corruption of an usb3.0 device usb stick. Strange errors, impossibility to mount. Repeated unplugging and replugging helps sometimes, in all cases recovery is necessary. Is this a know problem, a problem of my system Debian/sid, uptodate, self-compiled kernel of the suspend program (that initiates the suspend), the usb stick and file system, or the USB subsystem? I happily provide loads of further details...

On Thu, Aug 08, 2019 at 05:06:05PM +0530, Pankaj Gupta wrote: > The commit a7a69ec0d8e4 ("virtio_console: free buffers after reset") > deferred detaching of unused buffer to virtio device unplug time. > > This causes unplug/replug of single port in virtio device with an > error "Error allocating inbufs\n". As we don't free the unused buffers > attached with the port. Re-plug the same port tries to allocate new > buffers in virtqueue and results in this error if queue is full. > > This pa...

...ind user, and i want to reprogram my aastra pt 480e phone, my friend used the web configurator, but i think he programmed thw wrong codes, a few questions, is it possible to damage the phone by programming it wrong? also, how does one reset it literally to factory defaults? as unplugging it and replugging it back into the wall didn't work. regards a happy aastra user.