james.texter@cox.net
2006-Feb-15 14:43 UTC
[Asterisk-Users] Channel bank woes - no outbound calls
So, I'm still having this problem with outbound calls not working when using a channel bank. I've purchased a Rhino FXO channel bank from VoIPSupply.com to make sure it wasn't an equipment problem. I am using a Digium TE411P card, and have simplified it down to just 1 port plugged into the channel bank, with just 1 analog line plugged in. If I place an inbound call on the line, it goes through just fine. However, if I attempt an outbound call, I get "Your call did not go through. Please try your call again." After much experimenting, I found out this happens if you dial some digits, but not enough for a full phone number. My zaptel.conf looks like: span=1,0,0,esf,b8zs fxsks=1 loadzone=us defaultzone=us And my zapata.conf looks like: [channels] usecallerid=yes hidecallerid=no callwaiting=no threewaycalling=no transfer=no echocancel=no ; define channels group=1 context=from-pstn signalling=fxs_ks channel => 1 And finally, extensions.conf looks like: [from-pstn] exten => 6080,1,Answer() exten => 6080,2,Playback(hello-world) exten => 6080,3.Hangup() [internal] exten => 5148346,1,Dial(Zap/g1/514836) Anybody out there have any ideas on why all of the digits aren't being sent out? Thanks, James
james.texter@cox.net wrote:> So, I'm still having this problem with outbound calls not working when using a channel bank. I've purchased a Rhino FXO channel bank from VoIPSupply.com to make sure it wasn't an equipment problem. I am using a Digium TE411P card, and have simplified it down to just 1 port plugged into the channel bank, with just 1 analog line plugged in. If I place an inbound call on the line, it goes through just fine. However, if I attempt an outbound call, I get "Your call did not go through. Please try your call again." After much experimenting, I found out this happens if you > >James, When I have problems with outbound on my Adit 600, it's usually because I have signaling screwed up on that channel. (i.e. trying to grab a groundstart line with loopstart signaling). Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety."
> [internal] > exten => 5148346,1,Dial(Zap/g1/514836) > > Anybody out there have any ideas on why all of the digits aren't being sent out?Shouldn't this be like this ? exten => 5148346,1,Dial(Zap/g1/5148346)