search for: iaxfwd

...ds boxes also. Does anyone have a fix for this ? I set the DID simply to a custom context and it did the same... Anyone have a way to fix this ? Here is the output...... -- Accepting AUTHENTICATED call from 65.39.205.121, requested format = 4, actual format = 4 -- Executing Goto("IAX2/iaxfwd@fwd/5", "ext-local|7020|1") in new stack -- Goto (ext-local,7020,1) -- Executing Macro("IAX2/iaxfwd@fwd/5", "exten-vm|7020@default|7020") in new stack -- Executing SetVar("IAX2/iaxfwd@fwd/5", "FROMCONTEXT=exten-vm") in new stack...

Hello all, Here is my problem, I try to place a call to FWD (free world dialup) trough my asterisk PBX. my config is as follow: extensions.conf ---------------- [internal] exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD) exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD iax.conf -------- [general] context=default bandwidth=low disallow=lpc10 jitterbuffer=no forcejitterbuffer=no t...

> Well that didn't work....I now get this error > > > Jan 12 16:56:21 NOTICE[4989]: app_dial.c:746 dial_exec: Unable to > create > channel of type 'SIP' > == Everyone is busy/congested at this time > -- Executing VoiceMail("IAX2/iaxfwd@65.39.205.121:4569/5", "b") in > new > stackJan 12 16:56:21 WARNING[4989]: app_voicemail.c:1539 > leave_voicemail: No > entry in voicemail config file for '' > -- Timeout on IAX2/iaxfwd@65.39.205.121:4569/5 > == CDR updated on IAX2/iaxfwd@65.39.205.1...

Hello, I have 2 channels in iax.conf [iaxfwd] type=user callerid= Free World Dialup inkeys=freeworlddialup auth=rsa context=incoming qualify=yes [iaxfwd-outbound] type=peer host=iax2.fwdnet.net username=xxxxxx secret=*********** auth=md5 The problem is: When I tell FWD to call me I have this output in my asterisk consol: Executing Dial(...

...cemail.. the logs show this: -- Accepting AUTHENTICATED call from 65.39.205.121: > requested format = ulaw, > requested prefs = (), > actual format = ulaw, > host prefs = (alaw|ulaw|ilbc|gsm), > priority = mine -- Executing Dial("IAX2/iaxfwd@65.39.205.121:4569-2", "sip/casa1|20|r") in new stack -- Called casa1 -- SIP/casa1-cfa7 is ringing -- Accepting AUTHENTICATED call from 65.39.205.121: > requested format = ulaw, > requested prefs = (), > actual format = ulaw, > host...

...; IAXtel username/password TRUNK=Zap/g2 ; Trunk interface ;exten => _.,1,Congestion ;exten => s,1,Answer ;exten => s/* ;exten => s,4,BackGround(welcome) ;exten => s,2,SetCIDName(Good Person) ;exten => s,3,Dial(SIP/goodperson) [IAXFWD] exten => _98.,1,SetCallerID(my FWD #) exten => _98.,2,SetCIDName,"FWD.Fahad" exten => _98.,3,Dial(IAX2/ my FWD #: my fwd password @iax2.fwdnet.net/${EXTEN:2},120,r) exten => _98.,4,Congestion exten => _98.,1,SetCallerID(my FWD #) exten => _98.,2,SetCIDName,&quo...

Hi, Is it possible to set a variable for a context for all extensions? I haven't been able to find it. I want something like this in extensions.conf: [from-iaxfwd] exten => .,1,RING=r3 exten => 123456,1,Goto(from-pstn,s,1) [from-internal] exten => .,1,RING=r2 include => ext-local [ext-local] exten => 1,1,Dial(Zap/1,${LONGTIMEOUT}) exten => 2,1,Dial(SIP/2,${LONGTIMEOUT}) But how do I do this? I want to change the ring depending on the s...

...World via IAX. But when Dialing out i get: May 13 13:42:01 WARNING[1150495040]: chan_iax2.c:5256 socket_read: I don't know how to authenticate iaxtel to 65.39.205.121 my IAX.conf if as follows [general] port=5036 register => ######:xxxxxxxxxxxxx@iax2.fwdnet.net disallow=all allow=ulaw [iaxfwd] type=user context=fromiaxfwd deny=0.0.0.0/0.0.0.0 permit=65.39.205.0/255.255.255.0 Gotta be something easy im missing.

When I try to call out to FWD over IAX2 I get: Call rejected by 65.39.205.121: Unable to negotiate codec I'm using asterisk-1.0.5 (the same settings works fine with *0.9) I've standard settings in iax.conf [general] bindport=4569 register => xxxxx:xxxxxx@iax2.fwdnet.net [iaxfwd] type=user context=fromiaxfwd auth=rsa inkeys=freeworlddialup disallow=all allow=ulaw -- #Joseph

Hi, I had a FWD account set up with asterisk (using SIP) and it was working fine both ways. I switched to IAX2 and now I can't get incoming calls from FWD. People who call my FWD number get a "480 - user is not online" message without any traffic reaching my box. I can call FWD numbers fine over IAX2. It seems fwd isn't trying to place the call over IAX2 because it thinks

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.

....net/617533|60|r") in new stack -- Called 617533:xxxxxx@iax2.fwdnet.net/617533 -- Call accepted by 65.39.205.121 (format ulaw) -- Format for call is ulaw -- Accepting AUTHENTICATED call from 65.39.205.121, requested format = 4, actual format = 4 -- Executing Dial("IAX2/iaxfwd@65.39.205.121:4569/3", "sip/4021|15|r") in new stack -- Called 4021 -- Accepting AUTHENTICATED call from 65.39.205.121, requested format = 4, actual format = 4 -- Executing Dial("IAX2/iaxfwd@65.39.205.121:4569/4", "sip/4021|15|r") in new stack -- C...

Hi List; If I need to do a trunk between Asterisk and another SIP softswitch (so Asterisk will send a SIP calls to that softswitch), then I have to configure this on the sip.conf file or where exactly? And is it the same when I configure iax trunk? Should I determine the context in this case for this SIP trunk? Regards Bilal

Hi everyone! I have a problem... We have received a couple of phone numbers for voip from a local voip-provider. The work fine directly with a Cisco 7960, but so far I've not been able yet to integrate them into Asterisk. I've tried: /etc/asterisk/extensions.conf ***** [ip-incoming]

...y new * in the pbx means to modify all other *. So what i thougth was to set a main one with some of slaves or users, in this way, i will only need to add new "slaves" in the master, and this is what i tried. Office iax.conf =============== register => 999999:mypass@iax2.fwdnet.net [iaxfwd] type=user context=fromiaxfwd auth=rsa inkeys=freeworlddialup [rsaauth] type=peer host=dynamic auth=rsa outkeys=myast username=rsaauth context=extensions [user01] type=peer user=user01 host=dynamic secret=somepass username=user01 context=localuse outkeys=myast inkeys=myast Office extensions.conf...

...-- Executing Hangup("SIP/104-b8eb", "") in new stack == Spawn extension (home, h, 1) exited non-zero on 'SIP/104-b8eb' IAX.CONF [general] port=5036 register => mynumber:password@iax2.fwdnet.net register => khagan:spider1@iaxtel.com disallow=all allow=ulaw [iaxfwd] type=user context=fromiaxfwd ;context=local deny=0.0.0.0/0.0.0.0 permit=65.39.205.0/255.255.255.0 [Iaxtel] type=friend host=iaxtel.com secret=password auth=rsa context=from-iaxtel inkeys=iaxtel Please help me. Im working with IAX FWD. Tried putting different codec's in. extension.conf is as...

...annels and if so how? For reference my iax.conf looks likes: [general] port=5036 bindaddr=0.0.0.0 bandwidth=low echocancel=yes jitterbuffer=yes maxjitterbuffer=500 maxexcessbuffer=100 dropcount=5 register => djohnson:12dookie@iaxtel.com tos=lowdelay #include /etc/asterisk/users/iax/iax_users [iaxfwd] type=user context=IAX_FWD deny=0.0.0.0/0.0.0.0 permit=65.39.205.0/255.255.255.0 Thanks for the help! dj

...Retry[No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00009ms SCall: 00040 DCall: 00000 [65.39.205.121:4569] VERSION : 2 CALLED NUMBER : 398xxx CALLING NUMBER : 511 CALLING NAME : edguy@pulver.com LANGUAGE : en USERNAME : iaxfwd FORMAT : 4 CAPABILITY : 4 ADSICPE : 2 DATE TIME : 148517838 Asterisk*CLI> Jun 26 12:36:10 NOTICE[98311]: chan_iax2.c:4439 socket_read: Rejected connect attempt from 65.39.205.121 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: REJEC...

...] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: REGREQ Timestamp: 00019ms SCall: 00001 DCall: 00000 [65.39.205.121:4569] USERNAME : <FWDNUMBER> REFRESH : 60 ================= IAX CONF ================ register => <FWDNUMBER>:FWDPASSWD@iax2.fwdnet.net [iaxfwd] type=user auth=rsa inkeys=freeworlddialup disallow=all context=fromiaxfwd context=fwd-out ================ EXTENSIONS CONF ================ FWDUSERID1=<FWDNUMBER> ; your calling number FWDCIDNAME="MyName"; your caller id FWDPASSWORD=secret ; your password FWDRINGS=sip/2201 ; the p...

...loging failed type scenario. Thanks. ---------------------------------- iax.conf: [general] bandwidth=low disallow=lpc10 iaxcompat=yes jitterbuffer=no tos=lowdelay [guest] type=user context=default callerid="Guest IAX User" [iaxtel] type=user context=default auth=rsa inkeys=iaxtel [iaxfwd] type=user context=default auth=rsa inkeys=freeworlddialup [hayley] type=friend secret=hayley host=dynamic context=default callerid "Hayley" <100> permit=192.168.0.0/255.255.255.0 -------------------------------------------------------- outout from iax2 debug while phone is trying...