I would like to install a TDM04B with Asterisk@Home 2.4 and Asterisk@Home 1.5 but I didn't find documentation about this installation. Thanks in advance, Nelson -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060206/85ff5252/attachment.htm
Is anyone out there using Voicepulse Connect! Service under SIP with Asterisk successfully? And if so, can you please post the sip.conf settings. I know that Voicepulse recommends for the service to be used in IAX2, but it would be nice to use as an alternate SIP when they are having problems with their IAX2 servers. Thanks in advance. Juan. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060206/56b49dcf/attachment.htm
Hi, In my remember. The AAH will automatic config the TDM04B card. try the CLI command "zap show channels" regards, kevin _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nelson Granados Sent: Tuesday, February 07, 2006 7:18 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TDM04B FXO Asterisk@Home I would like to install a TDM04B with Asterisk@Home 2.4 and Asterisk@Home 1.5 but I didn't find documentation about this installation. Thanks in advance, Nelson -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060207/81f544b0/attachment.htm
Hi, The magical incarnation is: 0. Fix /etc/udev./rules.d/50-udev.rules if it has been banged up by yum. 1. "rebuild_zaptel" 2. "reboot" 3. "genzaptelconf" 4. "reboot" That should do the job. There are more elegant ways than reboot'ing ... but wtf. BTW. A@H 2.5 is out now. It includes some important bugfixes so consider that instead. Also check out these links: http://mundy.org/blog/index.php?p=112 http://asteriskathome.sourceforge.net/handbook/ http://members.optusnet.com.au/~bsharif/asterisk/AsteriskDumbMeGuide.htm /John>>> kevin.ling@amphenol.com.tw 02/07/06 11:06 am >>>Hi, In my remember. The AAH will automatic config the TDM04B card. try the CLI command "zap show channels" regards, kevin _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nelson Granados Sent: Tuesday, February 07, 2006 7:18 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] TDM04B FXO Asterisk@Home I would like to install a TDM04B with Asterisk@Home 2.4 and Asterisk@Home 1.5 but I didn't find documentation about this installation. Thanks in advance, Nelson