Hy, I have a network with WIFI communication and VHF/ HF channels. I have integrated asterisk in the network using SIP, ZAP and IAX2 channels for WIFI communications, but I don't Know How I could integrate the VHF/ HF channels. I have heard speaking about app_rpt project, but I don't Know very much about this. Could I integrate VHF/ HF channels with this application? if the answer is yes, How? Regards.
2 ways. 1) buy into the app_rpt system. They have a bespoke card for your PC that can drive radio's etc. It's mainly aimed at repeater owners. 2) connect a phone patch between an ATA and your HF rig. This solution is currently being used to provied phone services from a few Red Cross shelters to the ARC HQ in Montgomery, AL. It works well. Mark, KC2ENI makevuy wrote:> Hy, > I have a network with WIFI communication and VHF/ HF channels. > I have integrated asterisk in the network using SIP, ZAP and IAX2 > channels for WIFI communications, but I don't Know How I could integrate > the VHF/ HF channels. > > I have heard speaking about app_rpt project, but I don't Know very much > about this. > > Could I integrate VHF/ HF channels with this application? if the answer > is yes, How? > > Regards. > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-- Mark, G7LTT/KC2ENI Randolph, NJ http://www.g7ltt.com
Jonathan k. Creasy
2005-Sep-07 07:30 UTC
[Asterisk-Users] channels VHF/ HF radio in asterisk
The VHF or HF is determined by the radio equipment you have attached, not the software. -Jonathan -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of makevuy Sent: Wednesday, September 07, 2005 10:01 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] channels VHF/ HF radio in asterisk Is then possible using app_rpt solution for both VHF and HF channels? Regards. Mark Phillips escribi?:> 2 ways. > > 1) buy into the app_rpt system. They have a bespoke card for your PC > that can drive radio's etc. It's mainly aimed at repeater owners. > > 2) connect a phone patch between an ATA and your HF rig. This solution > is currently being used to provied phone services from a few Red Cross > shelters to the ARC HQ in Montgomery, AL. It works well. > > Mark, KC2ENI > > makevuy wrote: > >> Hy, >> I have a network with WIFI communication and VHF/ HF channels. I have >> integrated asterisk in the network using SIP, ZAP and IAX2 channels >> for WIFI communications, but I don't Know How I could integrate the >> VHF/ HF channels. >> >> I have heard speaking about app_rpt project, but I don't Know very >> much about this. >> >> Could I integrate VHF/ HF channels with this application? if the >> answer is yes, How? >> >> Regards. >> >> _______________________________________________ >> --Bandwidth and Colocation sponsored by Easynews.com -- >> >> Asterisk-Users mailing list >> Asterisk-Users@lists.digium.com >> http://lists.digium.com/mailman/listinfo/asterisk-users >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-users >> >_______________________________________________ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Huddleston, Robert
2005-Sep-08 08:18 UTC
[Asterisk-Users] channels VHF/ HF radio in asterisk
Maybe this could be used with the Internet Repeater trunking system.... I primarily use VHF... But would be interested in setting that up on my asterisk with the Internet 2M Repeater trunking system <inter-connect> Robert A. Huddleston, KF4BYY Cavalier Telephone LLC. (Desk) 804.422.4401 (Cell) 804.400.3686 rhuddleston@cavtel.com> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of > Carlos Alperin > Sent: Thursday, September 08, 2005 10:36 AM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] channels VHF/ HF radio in asterisk > Importance: High > > This is an old solution for pbx's, was called autopatch. > > The issue is that the pbx is full duplex, and most of this > radios are half duplex. > > That is all, so the rpt solution deals with that plus the > electrical interface to the system. > > Carlos Alperin > > > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of makevuy > Sent: Wednesday, September 07, 2005 10:01 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] channels VHF/ HF radio in asterisk > > > Is then possible using app_rpt solution for both VHF and HF channels? > > Regards. > > Mark Phillips escribi?: > > > 2 ways. > > > > 1) buy into the app_rpt system. They have a bespoke card > for your PC > > that can drive radio's etc. It's mainly aimed at repeater owners. > > > > 2) connect a phone patch between an ATA and your HF rig. > This solution > > is currently being used to provied phone services from a > few Red Cross > > shelters to the ARC HQ in Montgomery, AL. It works well. > > > > Mark, KC2ENI > > > > makevuy wrote: > > > >> Hy, > >> I have a network with WIFI communication and VHF/ HF channels. > >> I have integrated asterisk in the network using SIP, ZAP and IAX2 > >> channels for WIFI communications, but I don't Know How I could > >> integrate the VHF/ HF channels. > >> > >> I have heard speaking about app_rpt project, but I don't Know very > >> much about this. > >> > >> Could I integrate VHF/ HF channels with this application? if the > >> answer is yes, How? > >> > >> Regards. > >> > >> _______________________________________________ > >> --Bandwidth and Colocation sponsored by Easynews.com -- > >> > >> Asterisk-Users mailing list > >> Asterisk-Users@lists.digium.com > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> To UNSUBSCRIBE or update options visit: > >> http://lists.digium.com/mailman/listinfo/asterisk-users > >> > > > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > --Bandwidth and Colocation sponsored by Easynews.com -- > > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- A non-text attachment was scrubbed... Name: rhuddleston.vcf Type: text/x-vcard Size: 592 bytes Desc: rhuddleston.vcf Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20050908/f7b3bad1/rhuddleston.vcf