Hi, I have still had no luck with faxing and am getting a couple of pages of the following debug message Changed from phase 1 to 4 DIS: Prefer 256 octet blocks Can receive fax Supported data signalling rates: V.27ter and V.29 R8x7.7lines/mm and/or 200x200pels/25.4mm 2D coding Scan line length: 215mm Recording length: Unlimited Receiver's minimum scan line time: 0ms at 3.85 l/mm: T7.7 = T3.85 R8x15.4lines/mm Minimum scan line time for higher resolutions: T15.4 = T7.7 North American Letter (215.9mm x 279.4mm) North American Legal (215.9mm x 355.6mm)>>> DIS: 80 00 ce f4 80 80 81 80 80 80 18HDLC underflow in state 9 Changed from phase 4 to 3 Slow carrier up Slow carrier down Slow carrier up Slow carrier down This goes on for a few seconds before hanging up. Anyone got any ideas what this means or how it can be fixed? Regards Lee -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050823/c759f9e2/attachment.htm