search for: receiving

Hello, I'm running the 1/14/04 CVS and am having problems with faxes. I've tried faxing through both a Cisco ATA186 and Sipura SPA2000. I have Asterisk, the ATA186 and Sipura all hard coded to G711ulaw. When the fax machine trains, I get a stream of errors in the log file. The log is attached below. If you have any suggestions they would be GREATLY appreciated. Thank you!!! Jan 21

Hi Charles, Running upsdrvctl -D start on the host with all three configured to SNMPv3 kicks out 56 different "unhandled ASN 0x81 from ..." lines on all three but importantly they all start up and keep running. I'm starting to suspect the startup is taking so long that systemd is timing out and killing it. time -p reports real time of 133.27. I'm not a fan of systemd but

New NUT install dealing with three APC Smart-UPS 5000s, two of which have AP9617 and the third has a AP9619 card. The SNMPv3 configurations on all three are exactly the same. This is confirmed by snmpget calls that work just fine: snmpget -Cf -v3 -u [...] -l authPriv -A '[...]' -X '[...]' -a MD5 -x DES [upsname] .1.3.6.1.4.1.318.1.1.1.1.1.1.0 snmp-ups can query all three

Has anyone else had this symptom? It seems like my PRI ?restarts? each hour. I?ve got a PRI from Qwest in central California. What I don?t know is if this is on the * side or on the telco side. I don?t use my system enough to know if this is a big problem, a minor glitch or just an ?undocumented feature? - ? Any suggestions on how to track the source of these ?restarts?? Anybody else seen

...(- *.Z) [global CVS] [receiver] add_rule(- *.elc) [global CVS] [receiver] add_rule(- *.ln) [global CVS] [receiver] add_rule(- core) [global CVS] [receiver] add_rule(- .svn/) [global CVS] [receiver] add_rule(- .bzr/) [global CVS] [receiver] parse_filter_file(/home/john/.cvsignore,8380,0) [not found] receiving file list ... [sender] add_rule(:C .cvsignore) ERROR: out of memory in add_rule [sender] rsync error: error allocating core memory buffers (code 22) at util.c(115) [sender=2.6.9] _exit_cleanup(code=22, file=util.c, line=115): about to call exit(22) rsync: connection unexpectedly closed (8 bytes re...

...receive,n,NoOp(FAXOPT(headerinfo) : ${FAXOPT(headerinfo)}) exten => receive,n,NoOp(FAXOPT(localstationid) : ${FAXOPT(localstationid)}) exten => receive,n,NoOp(FAXOPT(maxrate) : ${FAXOPT(maxrate)}) exten => receive,n,NoOp(FAXOPT(minrate) : ${FAXOPT(minrate)}) exten => receive,n,NoOp(**** RECEIVING FAX : ${FAXFILE} ****) exten => receive,n,ReceiveFAX(/var/spool/asterisk/fax/${FAXFILE}) exten => receive,n,System('/usr/local/bin/fax2mail -p -f "${FAXFILENOEXT}" --cid-number ${CALLERID(num)} --cid-name "${CALLERID(name)}" --dest-name "Sir/Madam"')...

Hi all, from much of the documentation I''ve seen, the advice is to set readonly=on on volumes on the receiving side during send/receive operations. Is this still a requirement? I''ve been trying the send/receive while NOT setting the receiver to readonly and haven''t seen any problems even though we''re traversing and ls''ing the dirs within the receiving volume during the s...

I did a yum update on my management server and now the ovirt gui is no longer accessable. Is it supposed to just work or do I need to do something after the yum update? Justin.

Hello, I'm trying to get an energenie EG-UPS-033 (http://energenie.com/item.aspx?id=8087) to work with nut. It standard comes with linux software (UPSmart), which shows the input/output voltage, load level, input frequency. and battery and case temperature. The values change about every second. The selected monitor mode in this tool is Mega(USB). The bad thing of this tool that it

Hi, I have the above UPS connected to a FreeBSD 6.2 box and it shows 'data stale' very frequently (every few minutes). I have tried the usual trick of setting maxage, poll interval, etc etc but to no avail. When I wind up logging I see (on mge-shut) entering shut_get_report(id: 0d, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 16, len: 1800) shut_wait_ack():

Hello Charles, I think we are making progress! I grabbed nut using git, and applied your patch without any problems. Getting to the point that I could run a configure on my RPi - was something else. I found this blog post, which was very helpful (for anyone else that may try it): http://atelier-orchard.blogspot.com/2013/11/raspberry-pixf86-video-fbdev.html It's not in English, but you get

...osquigle@cs.uchicago.edu> Date: 05 Dec 1998 17:50:38 -0600 Message-ID: <o9u7lw6ywq9.fsf@yeenoghu.cs.uchicago.edu> Lines: 19 X-Mailer: Gnus v5.6.9/XEmacs 20.4 - "Emerald" X-moderate: yes Are there any known vulnerabilities in portmap (redhat's portmap-4.0-7b)? I've been receiving a lot of attempts to access the portmap port on some linuxppc machines I administer by various machines which clearly have no business with mine, and I wonder if this is an attempt to break in to my machines. I've searched some archives, but I haven't yet found any known vulnerabilities in...

Hello folks, I have a question and a small problem... I did try to replicate my zfs with all the snaps, so I did run few commands: time zfs send mypool/d at 2006_month_10 | zfs receive mypool2/d at 2006_month_10 real 6h35m12.34s user 0m0.00s sys 29m32.28s zfs send -i mypool/d at 2006_month_10 mypool/d at 2006_month_12 | zfs receive mypool/d at 2006_month_12 real 4h49m27.54s user

Hello Everyone, Are these indications of attacks on this system? I specifically have port 22 disabled at all times and only port forward it to server when I access SSH for a minute or so. Shouldn't UNKNOWN be an actual IP address? */var/log/secure:* May 14 00:35:39 pbx sshd[9011]: Did not receive identification string from UNKNOWN May 14 00:36:09 pbx sshd[9040]: Did not receive

...index 901caa5..ece6a5a 100644 --- a/man/btrfs.8.in +++ b/man/btrfs.8.in @@ -668,11 +668,16 @@ Receive subvolumes from stdin. Receives one or more subvolumes that were previously sent with btrfs send. The received subvolumes are stored into \fI<mount>\fP. -btrfs receive will fail in case a receiving subvolume -already exists. It will also fail in case a previously -received subvolume was changed after it was received. -After receiving a subvolume, it is immediately set to -read only. +btrfs receive will fail with the following case: + +1.a receiving subvolume already exists. + +2.a previously...

hi Guys I have now spent hours on this and turn to you in desperation. I am using Actionmailer to fetch emails, but I need to pass a userid to the receive method, so that the receive method knows what user to pass the email to. I tried: (ATTEMPT 1) class PokeMailer < ActionMailer::Base def receive(email,userid) ... end I then invoke the receipt of email with task =

Hi all, I have a problem with smbclient from the samba-client-3.0.14a-2 package supplied with Fedora Core 2. It hangs when listing any directory with over 36 items in it on one particular Windows XP Professional box I'm trying to back up. If I run smbclient -d 3, I get the following output over and over when listing the directory: received 36 entries (eos=0) received 36 entries (eos=0)

Hi, well, swift response! Qualcomm has a patched qpopper (2.5) Greetings, Jan-Philip Velders <jpv@jvelders.tn.tudelft.nl> ---------- Forwarded message ---------- Date: Mon, 29 Jun 1998 21:43:18 -0700 From: Praveen Yaramada <pyaramad@QUALCOMM.COM> To: BUGTRAQ@NETSPACE.ORG Subject: Patched Qpopper2.5 release Notification. Hello Folks, As you are already aware that qpopper

...Version: -current Hardware: Other OS: Linux Status: NEW Severity: enhancement Priority: P5 Component: Miscellaneous Assignee: unassigned-bugs at mindrot.org Reporter: djm at mindrot.org Tracking bug -- You are receiving this mail because: You are watching the assignee of the bug. You are watching the reporter of the bug.

zfs receive should allow option to disable immediately mount of received filesystem. In case of original filesystem have changed mountpoints, it''s hard to make clone fs with send-receive, because received filesystem immediately try to mount to old mountpoint, that locked by sourcr fs. In case of different host mountpoint can be locked by unrelated filesystem. Can anybody recommend a