search for: gatekeep

Hello I am a newbie to Asterisk. We have set up Asterisk on a PC with Redhat 9.0. We have installed H323 openphone on our PC's. We are wondering what a gatekeeper does. It seems we need one but what I have seen in this group is that a gatekeeper must be installed on another box on the network. As all our PC's on the network use Microsoft OS is there a free gatekeeper software for microsoft operating system? Does Asterisk have a built in gatekeeper?...

...nds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using the gatekeeper I am able to register my h323 client with a phone number, it all seems to be working. When I put the ip address of the gatekeeper into h323.conf, asterisk failed to load. I get an error that I can't open an h323 listener on port...

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to....

Hi, I want to configure * to use a gatekeeper for routing calls to H.323 endpoints. I imagine it will work like that: * (chan_h323) will query the gatekeeper where to terminate the dialed number and the gatekeeper will return the information for the h.323 gateway. after that chan_h323 will try to make the call to the gateway it has received...

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gateke...

All, I'm running (attempting to) ooh323 with Asterisk and a Cisco 2621XM router operating as a H.323 GateKeeper, however when I bring the Asterisk box up it registers successfully with the GateKeeper (exchanges GRQ/GCF, then RRQ/RCF) it notes the GateKeeper supports keepalive at 300 seconds, when it gets to time to re-register its sends an RRQ again and gets rejected with RRJ (unspecified reason) and so cl...

Hi All; First of all, I am looking to have the H323 Gatekeeper service available at Asterisk, and really I do not know if 1.4 or 1.6 or 1.8 started implementing H323 gatekeeper functionality or not? Until 1.4.26.2 version, there is no h323 gatekeeper functionality. So, any implementation for this feature has been done in the other versions?

I'm trying to connect an Asterisk 1.6 to an Avaya with gatekeeper (CLAN). When chan_ooh323 first loads it tries to establish a connection with the gk but I it fails. I have the following extract from the ooh323 log. Can anyone give some insight? Thanks! MD 23:02:59:045 Sent GRQ message 23:02:59:045 GkClient Received RAS Message 23:02:59:045 Received...

All - NEED HELP BADLY.. Using Asterisk with H323 Channels.. Everything is installed but we cannot register w/ Lucent gatekeeper. We ran ethereal and found that it was making GRQ (Gatekeeper discovery requests).. We had provided the name of the Gatekeeper (it's IP) and cannot determine why it's trying to do a GRQ. We want it to go straight into RRQ or ARQ and skip the GRQ.. Netmeeting does not GRQ and successfully...

All, I'm haveing a bit of trouble getting my head around H.323 and call routing with Gatekeepers, Zones and intra-zone calls - hopefully someone who is more informed in things H.323 will be able to point me in the right direction...? I already have a mature network of Asterisk boxes dotted around the UK and overseas with hundreds of extensions and our own number-plan/dial-plan in the form...

Has anyone had any luck getting Asterisk 1.6.2.13 to register to a Tandberg Gatekeeper? The logs on the Asterisk end seem to show that the registration request is sent, and the Tandberg Gatekeeper responds. However, the response doesn't seem to be what Asterisk was expecting. Here is my ooh323.conf, followed by the relevant portion of the h323_log: [general] port = 1720 bin...

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console....

Hello, i want to use asterisk as a gateway for H323-Phones. But i cant get it work. I'm using a gatekeeper on another computer. My IP-phone is registered there. Does anybody can sent me an oh323.conf and extension.conf as examples? Thanks in advance Erik Bastian -- NEU : GMX Internet.FreeDSL Ab sofort DSL-Tarif ohne Grundgebühr: http://www.gmx.net/dsl

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing '/etc/asterisk/h323.conf': Found == Creating H.323 Endpoint =...

...ISDN gateways - I want to connect it to VoIP and Asterisk. The Asterisk box is FC6, Asterisk 1.2.14, ooh323 from Asterrisk-Addons-1.2.5 - using ooh323 because the others depend on OpenH323 libraries which are problematic (see below) In the Damm Cellular system H.323 configuration use of a H.323 gatekeeper is mandatory, not optional :o( So, how to join the Damm system to an Asterisk box? Some ASCII art: 192.168.1.0/24 -------------------------------------------------------- | | |...

...ret for the account. /etc/ppp/options has the "login" flag turned on, and before changing any PAM settings I verified that I could add a local account to pap-secrets, dial in, and authenticate with it. Here's what happens when I try to dial in with a domain account: Aug 22 12:09:00 gatekeeper mgetty[23404]: data dev=ttyS0, pid=23404, caller='none' , conn='33600/ARQ/V34/LAPM/V42BIS', name='', cmd='/usr/sbin/pppd', user='/AutoPPP/ ' Aug 22 12:09:00 gatekeeper pppd[23404]: pppd 2.4.1 started by a_ppp, uid 0 Aug 22 12:09:00 gatekeeper pppd[23404]: U...

Hello, I am new to this list and to asterisk and going through the archive file I did not find an answer to my problem. I have a VoIP network working fine with multiple gateways registered to a Cisco H.323 Gatekeeper. I have successfully registered Asterisk as a GW in that network and also successfully registered two X-Lite SIP Client to asterisk that call to each other. I want to connect to the H.323 network but call does not progress from the SIP to the H.323 network. This is the ASterisk console output...

All, I've fixed my problem getting Asterisk ooh323 channel to stay registered with my Cisco IOPS gatekeeper, now I need to get dialling working. I have the following: [Asterisk with ooh323] ----h323---- [Cisco IOS GK] ----h323---- [Radio system OpenH323] 192.168.1.5 192.168.1.6 192.168.1.7 the Asterisk box has numbers like 810200...

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

I've read through the archives and have picked up that * does not need a gatekeeper to talk directly with an H323 handset to send and receive calls. I'm trying to go PSTN----*-----H323 and all the examples that I can find use a gatekeeper. Are there any examples or hints for doing it without the gatekeeper? many thanks in advance Brian